Holsters

, ,

Rogue Apparatus Holster

, ,

  When it comes to everyday holsters, most people tend to go straight to kydex. Well, Rogue Apparatus is here to change that with their hand crafted leather holsters. These leather holsters rival kydex in form and function. Rogue Apparatus sent an Appendix Inside the Waistband (AIWB) holster for me to try out.

  The first thing you notice about this holster is how nice the leather work is. Yes, it is handcrafted, which adds to the appeal. They are also molded to your particular firearm. This particular one is for a G19 and is green and black dyed leather. My understanding is that Rogue Apparatus can dye these in just about any color you want. The holster is sewn nicely too. It really is a beautiful holster.

  Moving on to the holster design. As mentioned, this Rogue Apparatus holster is mainly an AIWB. I ended up taking the wing off and using it as just an IWB and it works great in that role. Because the Rogue Apparatus holster is an AIWB, it does not have any adjustments for cant or ride height. The holster uses thick quality leather as the main material. It is then partially wrapped in a thinner leather. This thinner leather also holds the screws for the DCC monoblock so you can clip it onto your belt. DCC clips are my favorite and are the best belt clips I have used. One huge advantage to the Rogue Apparatus holster is the leather treatment. They seal it with an acrylic resolene. By sealing the leather holster in this manner, you get qualities that are similar to kydex. One of these is the ability of this leather holster to retain its shape better over time. The other is how the pistol “clicks” into the holster. It’s not as pronounced as kydex, but the Rogue Apparatus holster has a similar feel.

  I have carried the Lone Wolf Dusk 19 in this holster for some time. I really like the feel of leather. It seems more comfortable next to the skin. Yes, being that the Rogue Apparatus holster has been sealed, it is still stiffer than the leather holsters of the past. The Dusk 19 slides in and out of the holster nicely with some resistance. Since the holster is hand molded, it has indents around the trigger guard, very similar to any kydex holster. This helps aid in retention. The rest of the retention is also decent. This holster is also cut to accept a pistol with a red dot sight on it. One complaint is that the sight channel could be taller to accept “suppressor height” tall sights. Especially since it’s cut away for those red dots. The Rogue Apparatus holster has a nice sweat guard that rides up the side next to your body. This particular sweat guard is not too large or too small, it’s a very useful size. The holster is well designed and lets me get a good grip on the pistol and allows for a clean draw stroke.  

  If you are looking for something different in a holster, maybe more of a piece of functional art, look into a Rogue Apparatus holster. These things function as expected, they are a holster after all. Beautiful is probably an understatement on how they look. You will be  getting a custom leather holster that should treat you well for years to come. I’m pretty happy with what Rogue Apparatus has done with their AIWB leather holster. 

Firearms Insider Reviews - Key Points

Claim to Fame:

Custom Leather holster that functions like kydex

Target Market:

Concealed Carry

Features, Benefits, and Specifications of this product:

  • Made of veg-tan leather that has been custom dyed, formed and sealed with acrylic resolene to retain firm structure and snappy retention

  • Discreet carry monoblock

  • Modwing - removable

  • Stitched with heavy 277 Leather Machine Co threads.

What other aesthetic options or finishes are available?

Pretty much any color combination and clip styles

What others are saying?:

Angelo O. - 5 out 5 stars at ETSY.com     

I ordered this for my Kimber ultra carry ll. It’s a perfect fit, and very high-quality, it has good retention. It’s comfortable and it stays in place with the belt that I use.

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $165.00

Retail = Same

I need it now! Availability:

Rogue Apparatus or their ETSY store

Our Rating:

Pros:

  • Looks

  • Good retention

  • Multiple color options

  • DCC clip

  • Leather feels better than kydex

Cons:

  • Sight channel a little short

  • Price

  • No cant adjustable option when compared to kydex

Score: 8.00 Great

Favorite Link:  Vosteed Thunderbird Review

, ,

Cold War Concealment OWB Holster

, ,

THE MIGHTY TITAN

  Ladies and gentlemen, what we have here is a holster, a holster that I fell in love with as soon as I opened that package. I was contacted by Clif over at Cold War Concealment to see if I would be interested in reviewing one of his holsters. I thought why not, I am a sucker for a free holster. I am just like any gun guy out there and have a box, drawer and tote full of holsters that all were the latest and greatest at the time. But just keep reading it gets better.

  I told Clif to send me one for my Sig P 365 in an OWB configuration, he said no problem. In a couple days he contacted me and said here is your tracking number and it was on the way. I started really looking at the holsters he had on his website and he really focuses on the popular Glock, S&W, Springfield, Sig, Taurus, Ruger and smaller Walther models. This is something I found impressive. For some of these models it is hard to get a good quality holster for a, let's say, lower priced firearm. They offer holsters for IWB, OWB, semi autos and a wide array of the popular J frame revolvers. 

  The owner of the company is retired from the Airforce and is located in North Carolina. The process that is used to make the holster is a taco style, that is vacuum formed over a CNC mold that is cut for your particular firearm. It is then heated and formed together to complete the taco shape. All of the edges are nicely radius to reduce snag and pinch point. The sight channel is large to run suppressor height sights. It has a single adjustment/tension screw below the trigger guard that really makes adjustments and personal tension a snap. The belt loop that came with the holster has numerous adjustment angles and has two slots on each side to fit belts from 1.5” to 2”. I wear a 1.75” belt and it works out great. The OWB holsters are also available with the Safariland QLS fork mounting system. 

  The day I got the holster I made an IG post that I was going to go ride horses with my new holster. Well I was riding right up until the time I was bucked off, hung up in the stirrups and dragged down the gravel driveway. But hey I wasn't “KILT IN THE STREETZ". Anyway when I gathered myself up, wiped the blood from my face, found my glasses, straightened my cowboy hat back up, the gun was still retained in the holster. The holster had some wear, scratches but it was still in great shape. A few weeks later I took the holster with me on a bear/hog hunt and carried it while climbing up the side of the mountains. After coming out of the briars and laurel bushes the pistol was still retained. I also did some drills at the house on my range in the backyard, the holster sits just perfectly right in front of the hip bone. The mounting system keeps it close to the body, but not to close where my love handles get in the way. I was able to draw and reholster without any issues. 

  In closing we all have had holsters that we rave about, wear for a bit and then find another one and put that one aside and forget about it. Some we get, have so many attachments on them, you need to be an engineer just to figure it out. I am a K.I.S.S method person, keep it simple stupid. If you are in the market for a holster that is comfortable, reliable, no frills, top quality, family/veteran owned, this is the holster for you. I want to make one point, yes i got this holster for free, this did not sway my decision for writing this article. I write about how things work for me. I am placing an order for an IWB and mag holder this week. I believe in supporting small businesses that make great products, this is the American way. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

American made

Great construction

Reliable

Horse approved

Durable

Ease of care

Adjustable cant

Target Market:

Anyone needing a holster for a compact semi auto or revolver

CCW  use

Americans

FNBs (Features & Benefits of this product):

  • American made

  • Adjustable cant

  • Ease of use

  • Great quality

What other aesthetic options or finishes are available?

Different patterns and colors available

IWB

OWB

Claw

No claw

Optic cut

Link to other reviews:

https://www.youtube.com/watch?v=_4ikF2FT5YU

Price point:

MSRP = $50.00

Retail = Same

I need it now! Availability:

Cold War Concealment

They have them available on their website.

Our Rating:

Pros:

  • Simple

  • Comfortable

  • Rides great

  • Retains the firearm

  • Can get with QLS Fork

Cons:

  • Maybe a tek-lok mounting option

Score: 9.50 Amazing

, , ,

Victory Operational Works Crusader Holster

, , ,

  Victory Operational Works is a veteran owned company making a unique holster system. The Crusader is a 2 piece multi-use holster which is not your typical pancake style. Victory Operational Works also has one called the Crusader Max which has a built in mag carrier. I chose the standard Crusader in Kryptek Neptune, but Victory also sent me one of their Conspirator individual magazine carriers to try out. It is also in Kryptek Neptune. Both of which exude quality.

  The Crusader comes complete with everything you need. When I say everything, it really means everything. When you pull the Crusader out of its nicely sealed packaging, a bag of accessories comes out with it. In this little bag is all the extra hardware you need to change the Crusader from an inside the waistband (IWB) holster, to an outside the waistband (OWB) holster. This includes screws, rubber grommets, Torx style allen wrench, etc. The OWB mounting isn’t just some flimsy belt loops, Victory Operational Works gives you an official Blade-Tech Tek Lok to use for OWB carry. The Tek Lok is a proven secure mounting method that has built in belt width adjustments. For IWB use, the Crusader holster comes, out of the package, with an installed Discreet Carry Concepts 1.5” monoblock. The DCC clip also has a laser engraved “V” on it which is a really nice quality touch that I haven’t seen before. In my opinion, the DCC clips are the best IWB clips around. So check a box for Victory doing stuff correctly. 

  With all those mounting options, Victory goes one step farther with the Crusader. The Crusader has a bunch of different mounting hole options. Essentially, all these holes give the user plenty of different options for carrying the holster by being able to mount the belt clip or Tek Lok. Most notably are the different holes for ride height and cant. With the IWB and DCC option, you have 2 different ride height adjustments, as well as a cant option. There are 2 different ride height adjustments in the OWB configuration. Besides the supplied mounting options, Victory puts in a bunch of different holes for OWB carry. This allows you to install your own type of OWB attachments. Most notably are the Safariland mounting hole pattern. I ended up mounting a QLS fork from Safariland so I can quickly just add or remove the Crusader from my battle belt. All of the mounting holes are riveted so they will last a lifetime. Another check for the quality box. 

  When it comes to the Crusader itself, it is unique. I say this because the holster is constructed of 2 separate pieces. A front piece and a back piece. They are molded to each individual firearm, to make a complete holster, by custom made inhouse jigs. Then they are mounted together with 4 screws and rubber bushings. These 4 mounting points also make it possible for the end user to adjust the tension on the holster. You can make the gun fit super loose, or super tight. Adjust the 2 down by the trigger guard for that “snap in” feel, but keep the other 2 screws looser, and the pistol seems to glide out of the holster with ease. Or tighten them all up equally for more of that normal holster feel. The way Victory makes these 2 sides allows for tall sight and slide ride optics. The Crusader is an open bottom style holster. The open bottom allows lint and stuff to not build up in the holster. It also allows for the use of threaded barrels and compensators to stick out the end of the holster, if you are using such products. One thing I noticed about the Crusader, is that it angles the butt end of the pistol in toward your body. I really liked this as it helps to hide the grip a little better. 

  Victory Operational Works also sent their Conspirator magazine pouch. The Conspirator is a molded, universal, single mag carrier for double stack magazines . It also comes with all the hardware that the Crusader comes with, plus some options for a different style of DCC clip. The mag holder is the same excellent quality of the Crusader. It also has multiple holes for mounting it however one would like, angled either direction, straight, lower, higher, etc. One of the features, of the Conspirator, is the insert piece that lets you adjust the magazine's retention. Not by just clamping the screws tighter, but an adjustable drag plate inside the magazine pouch. I really like the Conspirator mag pouch. It may seem expensive at $49.99, but when you figure in all the mounting hardware, it’s a decent value.

  Every convertible holster has some trade offs. For me, the Crusader makes an excellent OWB holster. I like everything about it in that configuration. Where I think the trade off is, is in the IWB configuration. Because of the 2 piece design, there is a little more material to try and hide. This caused the holster and pistol to print more for me at the 2:30-3 o’clock position. Appendix carry was a little better, but not much. I really appreciated the designed in angles, or curves, that Victory puts into the holster. These angles make it a very comfortable holster to wear for IWB carry. Even if it does print more for me. Those angles also make it more comfortable for OWB carry. The Crusader also is made so that the pistol's magazine release button is not covered by the holster. This allows you to change a magazine without unholstering the pistol. But for me, it means that the holster itself won’t drop the magazine. Which has happened to me before. So nice job Victory.

  If you are looking for that one do-all holster, the Crusader from Victory Operational Works just might be it. The quality and craftsmanship are top notch, even down to using torx head screws that are used throughout the holster. It has great adjustability and comes with everything you need to convert it between IWB and OWB carry. Made in the USA with a lifetime warranty, you should go take a look at Victory Operational Works and the Crusader holster.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Quality Universal kydex holster

Target Market:

Anyone needing a do-all holster

FNBs (Features & Benefits of this product):

  • Blade-Tech Tek-Lok included for OWB carry, offering two different carry options, vertical and FWD cant

  • Discreet Carry Concepts 1.5” Monoblock Clip, with “V” laser engraved including mounting hardware for IWB carry, offering three different carry options, two ride height options with .5” difference and FWD cant

  • All mounting hardware is stainless steel for strength and to prevent rusting

  • Four adjustable retention points, two on the trigger guard side and two on the slide side, creating a sandwich type retention that applies equal pressure around the holster that maintains a perfect fit regardless of how tight or loose the retention is set

  • Three point angle adjustment in OWB configuration utilizing the Tek Lok and rubber bushings

  • Final fit on each holster performed with actual handgun, never plastic guns

  • Open access to magazine release so magazine can be removed while handgun remains safely holstered 

  • Positive pressure created by rubber bushing on all hard points, eliminating the need for thread lock

  • T-15 tool included with each holster

  • Highly polished edge treatment

  • OWB hole pattern is universal and compatible with G-Code RTI, Safariland QLS and Blade-Tech to name a few

  • Muzzle end is open

  • Rear sight catch to rack slide single handed

  • Every hole drilled is finished with an eyelet for added strength at each hard point

  • Optic compatible cut front plate and relief channel created on back plate 

  • No questions asked LifeTime Warranty

What other aesthetic options or finishes are available?

Tons

What others are saying?:

5/5 stars at victoryoperationalworks.com

Very well made

I’ve purchased many holsters in my life. This is the most versatile holster I have found to date. It’s a great draw holster also. Very pleased.

Link to other reviews:

Nothing found as of publishing

Price point:

MSRP = $129.99

     Mag Carrier = $49.99

Retail = $99.99 + depending on options

I need it now! Availability:

Victory Operational Works

Our Rating:

Pros:

  • Quality and craftsmanship

  • Standard design works with red dots

  • Open style (works with comps, etc.)

  • Everything included for IWB or OWB mounting

  • 2 piece design

  • Comfortable angled/curved design

Cons:

  • Larger than other IWB holsters

  • Prints more when using for IWB

Score: 8.00 Great

Favorite Link:  JSD Supply

, ,

Rough Cut Holsters RHAEGAL IWB

, ,

  Anyone that carries a pistol, should have a good holster. It doesn’t matter if you conceal carry, or just open carry. The point is, everyone needs a holster. This brings us to Rough Cut Holsters. They sent me one of their Rhaegal inside the waistband (IWB) holsters, with a few asked for modifications. This holster is nicer than I was expecting.

  The Rhaegal holster is one of Rough Cut’s IWB holsters. This particular one is for a Kahr CM9. They make this holster for a number of common pistols like Glocks, Sigs, Smith & Wessons, etc. The Rhaegal is a taco style holster. Meaning that it is one piece of kydex wrapped around the firearm. It’s a common type of IWB holster, especially for concealed carry.

  I asked for some options on this holster. One of them was a small “claw”. It adds like $5 to the price. But I really wanted to see if the claw would help conceal the small pistol better. Rough Cut told me it probably wouldn’t, and guess what? The holster maker was correct. The point is, they will let you do options, even if it doesn’t make much sense.

  Rough Cut also has various pattern and color options for their holsters. As we know, everyone likes to somewhat personalize their gear. I opted for a zombie green topo kydex with zombie green washers. It’s an IWB so nobody really sees it anyways. But if you want options, they can give you options. They also will do custom holsters. If they don’t have your firearm, they have some options for that also. 

  There are many great features to the Rhaegal holster:

 First up, it comes standard with the Discreet Carry Concepts (DCC) monoblock clip. This is the clip that attaches it to your belt, and the DCC is the best in my opinion. You can wear the holster straight up and down, or adjust the DCC clip to give you a 20 degree cant. Both holes are pre-drilled in the holster. I use the 20 degree cant as I feel it hides the butt of the pistol better. With this clip, the Rhaegal holster doesn’t move at all on my belt, it just stays where I put it! There is also an option for belt loops, if that’s what you like. I did ask for them to include holes to mount an UltiClip or another type of DCC clip, Rough cut supplied the extra holes. I did try it out using a single DCC clip and it works fine. This actually made the holster ride farther down the waist, and helped conceal the holster a tad bit better. It does make it slightly harder to get a good grip when drawing the pistol. So I went back to the way the Rhaegal came. But if you need ultimate discrete carry, that may be the way to go.

  Next up, is the quality. For the price you pay, I have never had a holster with as much attention to detail put into it. The Rhaegal is made from 0.080” thick kydex or boltaron. The thickness keeps the holster stable when drawing or reholstering. It also gives the pistol a positive “click” when holstering or when drawing the firearm out of the holster. The Rhaegal’s design gives it an undercut trigger guard feature. This undercut makes it easier to get a full grip, on the pistol, when drawing. But yet it still covers the trigger guard completely. The edges on the holster are the smoothest I have seen. Rough Cut explained how they do this. All I heard was, “lots of time is taken to do this”. The Rhaegal also came in a nice little cotton bag, just another little touch that Rough Cut adds in.

  Last up, is retention. I already mentioned the “click” when holstering and unholstering. But you also get adjustable retention. The 2 screws, in front of the trigger guard area, can be tightened or loosened to your liking. I have mine set somewhere in between tight and loose. I still get really good retention, in fact, if I hold the holster and shake it, the pistol stays in the holster. But yet it still has a really smooth draw to it.

  I literally have been wearing the Rhaegal everyday since it arrived. It took about a week for me to get used to it. It just rode in a different spot than my previous holster. After that initial week, I don’t even know I am wearing it. I wear it at 3 O’clock, but it can also be worn appendix also. Practice draws are way smoother than my previous holster. Reholstering is also super smooth. I have lots of practice draws with it, they are just as smooth today as when I first received the holster. The Rhaegal’s high sweat guard is rounded in a way that I do not notice it pushing on my side. This is a big plus, as I shy away from high sweat guards because I have not had good luck with them in the past. It is hard to put into words how well this holster carries and works. So you’ll actually have to trust me on this, it just does everything one would want a quality holster to do.

  One of the reasons to get an IWB holster is concealment. Well, since I am using a small pistol, the Rhaegal/pistol combo just disappears. I literally can wear this combo with shorts and a T-shirt. The comfort also helps. Since the combo is small and uses a DCC clip, I can wear it without a belt. I don’t recommend this, but I have done it without feeling like my holster was going to fall out/off. 

  Rough Cut Holsters did a great job with the Rhaegal. They make a bunch of other holster styles also. So if this little IWB rig isn’t what you want, well, they probably have you covered with something else. Their prices are very reasonable, especially when you see the quality you are getting. So far in my review career, this is the first holster company that I will be buying another holster from. So if that doesn't tell you how I feel about Rough Cut Holsters, I don’t know what will. Definitely go check out Rough Cut Holsters, and maybe tell them we sent you over.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Quality Kydex Inside the Waistband holster

Target Market:

Concealed Carry

FNBs (Features & Benefits of this product):

  • 0-20 degree adjustable cant  

  • Positive “CLICK” when holstering

  • Undercut Trigger Guard

  • Over-cut Open-face to Accommodate Threaded Barrels 

  • Accommodates Suppressor Height Sights 

  • Full Length Sweat Guard  Standard, others lengths are optional

  • .08 Kydex or .08 Boltaron

  • Multiple clip styles available

  • Optional patterns or colors

  • Optional optic cut

  • 100% Made in USA

What other aesthetic options or finishes are available?

Plenty, check out here - https://roughcutholsters.com/

What others are saying?:

Jesus A.  5 stars on https://roughcutholsters.com/

Best holsters

Had a hard time finding holsters to fit my P80. These are perfect.

Link to other reviews:

None found

Price point:

MSRP = $45.00

Retail as tested = $63.00 

  • $13.00 for graphics

  • $5.00 for “claw”

I need it now! Availability:

Rough Cut Holsters

Our Rating:

Pros:

  • Price

  • 0.080” Kydex

  • Super smooth edges

  • Great retention

  • Straight or 20 degree cant

  • DCC clip comes standard

Cons:

  • Pistol selection is limited for now

Score: 8.50 Great

85.jpg

Favorite Link:  Firearms Insider affiliates   

, ,

Discreet Carry Concepts belt clips

, ,

  Those familiar with me might describe me as a holster snob. This isn’t because I want to “flex on the poors” but with the plethora of holster manufacturers out there there’s really no reason to use a subpar holster. 

  One thing I’ve been super unhappy with are the mounting attachments available for concealed type holsters, more specifically, AIWB holsters. I’ve tried them all; from fomi clips, rcs struts, spring steel, ulticlip, soft loops, j-hooks, you name it. While some are far superior to others none offer the level of security, concealability, and comfort I desire. I’ve lately just defaulted to soft or “pull the dot” loops as they are the most secure but they lack in ease of use and concealment. 

  This is why when Discreet Carry Concepts (DCC) came out with their line of holster clips, I was curious but not very enthusiastic. Well, wrong I was. I have three DCC equipped holsters and don’t see myself ever going back to any other attachment method. As of the time of writing I am retrofitting the last two holsters I actually use with DCC clips and by the end of the month I won’t have a holster in rotation without them. 


Holsters currently equipped include: 

Armadillo concealment lux 

2 black rhino concealment custom pieces 

  One of the black rhino’s is exactly how it came from the company and the other two holsters were retrofitted with the clips by me. I currently have a Henry holster spark awaiting them and a philster spotlight that until recently wasn’t able to accept DCC clips but that is a whole review in itself. 

  The clips are super secure, in fact if I had to point out a con it would be they aren’t the easiest to get off. But not unmanageable and in my opinion no worse than soft loops. And if you think about it, the holster’s clips’ job is to securely attach the belt/pants. So ease of removal isn’t very high on my priority list. I have three different types as of writing but behind the belt variants and a monoblock that works over a belt or behind the belt. 

  The holster isn’t going anywhere. It is attached, it’s more secure than any metal or plastic clip I’ve tried and on par with soft loops if not a tad more secure because movement of the holster is practically nonexistent. It stays where you put it. And the best part is they are more low profile than even the thinnest of clips to include the terrible fomi clip. No more printing from the attachment point. 

  Installation is straight forward. If you own a screwdriver, you can install  these. I would use loctite or some kind of thread locker because I’ve had screws on holsters back out many times without it. I loctite everything. 

  The behind the belt style clips are a tad more challenging to put on the pants but it’s not rocket science and the monoblocks are pretty much as easy as those stupid fomi clips. The monoblock can be used with or without a belt. Seriously, it’s just as secure either way. While use without a belt isn’t fun with my g19 or g17 with the LCP it’s fantastic. 

  Long story short, every holster I use will have these or I just won’t use that holster. And they don’t break the bank. That’s always a nice plus. 

FIREARMS INSIDER REVIEWS - 8 KEY POINTS

CLAIM TO FAME:

Low profile secure holster attachment 

TARGET MARKET:

Concealment of iwb specifically aiwb holsters 

FNBS (FEATURES & BENEFITS OF THIS PRODUCT): 

  • Firmly holds the holster in place 

  • Low profile with little to no printing 

  • Durable spring steel 

  • Can be retrofitted to most holsters 

 WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE? 

Black or black with no logo

There are several belt sizes, ride height, configuration and cant options available 

What others are saying: 

From bigtexoutdoors.com

Brendon B. - 5/5 stars

Great for keeping the holster extra concealed w/o printing

Link to other reviews:

Recoilweb.com

Price point:

MSRP = $4.99 - $11.99 for the clips

$3.50 for hardware 

I need it now availability: 

Discreet Carry Concepts

Select holster manufacturers 

Our Rating:

Pros:  

  • Low profile

  • Very concealable. 

  • Secure attachment

  • Cost

Cons:

  • Can be hard to remove

  • Catch on clothing during draw (I’ve not personally experienced this through thousands of draw and multiple classes, but I’ve see one or two people talk about this online. So it’s worth mentioning) 

  • Cost depends on your holster setup

 Score:  8.5 Great

85.jpg



, ,

MatchPoint Ultimate Holster pack

, ,

  When I was searching around for a holster, I ran across MatchPoint USA. MatchPoint has a hybrid, adjustable holster system that looked interesting. Instead of just sending me the holster system, the sent me the Chest Carry Holster pack and some extras. I’m only going to review the Ultimate Holster Pack, as I don’t use chest holsters. The Ultimate Holster pack really is only missing the straps and a mounting plate, when compared to the Chest kit.

  The MatchPoint holster system is a hybrid style holster. That means that it has a backer system and then a shell that attaches to the backer. The shell is basically ¾ of the holster and is compression molded from Boltaron (a brand of kydex) . It then mounts to the backer using Chicago screws. The MatchPoint Ultimate holster system comes with two backers. One is a smaller size, think just slightly larger than the holster. The second one is larger, like is typically seen with most hybrid style holsters. For inside the waistband (IWB) carry, the system comes with a FOMI belt clip and 2 overhook belt clips. If carrying appendix, only one of the overhook clips is needed. These overhooks are also intended to be used on the larger backer. Also included are their Infinite Carry Loops, these allow using the system for outside the waistband (OWB) carry.

  If you want adjustability in your holster, the Ultimate holster pack is for you. The backer is made from a proprietary material that has the life properties of injected molded plastics, but with the flexibility of leather, they call it Comfortuf 420. My favorite thing about the MatchPoint system is it’s almost infinite options. Because the backers, both the small and large, are made with holes everywhere, you can adjust the holster as you see fit. If you want it to ride higher, lower, have more or less cant, just move the shell and/or clips to a different position on the backer plate. One could literally spend hours adjusting the system, I did.

   I’ve had the MatchPoint holster for about three months. I have carried off and on with it using a TimberWolf small framed pistol (it uses Glock holsters). Both using the wider/larger backer as a standard style hybrid holster, and the smaller backer. I didn’t  try it appendix. Both ways of carrying worked fine. The large backer was a little longer than I liked, but one could always cut the backer to a smaller size and then hit it lightly with some heat to smooth it back out. I ended up using the small backer to carry it strong side IWB. I started with the FOMI clip, but then ordered some of MatchPoints “Push to Lock” soft loops. Soft loops don’t conceal as well, in my opinion, but they work better than the FOMI clip for me. As for concealment, the Matchpoint isn’t the most concealable. It is not bad, just a little “blocky” for my taste. When I had the holster in the “hybrid style” with the large backer, it did conceal a little bit better. I think the lack of concealability is due to the squareness of the outer plastic shell. The carry loops for OWB worked well. I think they would shine on a solid kydex OWB holster. 

  With the Ultimate Holster pack, came some other extras. The kit included an “accessory mounting plate” or “A.M.P.”. This plate has 1.5” belt loops at both ends. It’s a little over 6” long and a little over 2” wide, but it includes numerous holes, just like the backers. The accessory plate, and the other things discussed in this paragraph, are all made from Tufmax 720. The Tufmax is much stiffer than the Comfortuf, but still has a little flex to it. The A.M.P. can be used to mount mag pouches, a knife sheath, a tourniquet, or anything else you might want on your belt. Not included in the Ultimate pack, but included in the Chest kit, is the “tactical mounting plate” or “Tac-AMP”. This is also another multi hole adapter, but this one is made to hook onto MOLLE/PALS webbing. It measures 5”x3” and has 200 holes. The Tac-AMP attaches with a cool slot system, so no tools are needed to get it on or off. This slot mounting system is very secure, and can be a pain to get on and off. I mounted a kydex holster to the panel, and then installed it in a backpack that has MOLLE inside it. Even with a full size pistol in the holster, the Tac-AMP system doesn’t move. One can also put some shock cord on the Tac-AMP to attach items to it, like a pen, flashlight, etc. MatchPoint also sent me a TAC-Book. The TAC-book is 2 Tac-AMP plates with hook and loop wrapped around 3 of the attachment slots, thus making a book. I personally haven’t found the perfect use for it yet, but MatchPoint has some good ideas on their website.

  If you are into adjustability, or just want something with all the options, the MatchPoint Ultimate Holster Pack might be right up your alley. But, only if you are right handed and have a Glock. The Ultimate holster would work good for someone who likes to experiment, or those not sure how they want to carry. The options with this system are endless, as are the options with most of MatchPoint’s products.  Go visit their website, they have a lot of good information on these holster systems.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Multi adjustable holster system

Target Market:

Those wanting a comfortable holster with any option they can think of

FNBs (Features & Benefits of this product):

  • Multi adjustable holster system

  • Flexible backing

  • Mounting holes everywhere

  • OWB loops

  • FOMI clip

  • Overhook belt clips

  • 2 different backers

  • Accessory Mounting Plate 

What other aesthetic options or finishes are available?

All parts available individually

What others are saying?:

Nothing found

Link to other reviews:

Nothing found worth noting

Price point:

MSRP = $49.95 as reviewed

Retail = $34.95 - $79.95

I need it now! Availability:

MatchPoint USA

Our Rating:

Pros:

  • Made in USA

  • Multi adjustable

  • Price

  • Impervious to oils or sweat

  • Flexible backing

  • Open holster design for different barrel lengths

Cons:

  • Shell / Holster is a little bulky

  • Only fits right hand Glock style pistols, for now

Score: 7.00 Good

70.jpg

Favorite Link:   Gun & Gear Cult





, ,

Blackhawk Omnivore

, ,

  After recently getting into the pistol red dot world I quickly realized one thing, duty style holsters are slim pickings.  You basically have safariland and that’s it. Or so I thought. Enter the Blackhawk Omnivore! Yes Blackhawk, the same company that makes the (in my opinion) terribly designed serpa. But the omnivore is different, it doesn’t require trigger finger manipulation to deactivate the retention, and the retention mechanism seems to not be subject to locking up with foreign debris. Since my safariland was on 90 days back order and this Blackhawk was shipping immediately. I figured I’d give it a fair shake and put my Blackhawk bias aside. 

  The other very notable feature of this holster is it’s pretty much pistol agnostic. It retains and indexes on the light (or rail attachment if you get the non light bearing model) and Blackhawk claims it fits more than 200 different pistols. This would normally be a huge red flag for me as holsters, in general, should be designed to fit a specific gun. But with holsters like the Phlster floodlight and Armadillo lux being two exceptions, it’s not a deal breaker. I opted for the TLR-1/TLR-2 model. 

  What the TLR-1/TLR-2 version is, it’s better than a serpa, but it’s no safariland. 

  While I’d prefer to judge this holster on its own merits, it’s pretty much impossible to not compare it to it’s only competitor.  

bo3.jpg

  So my first impressions were not good, there were a bunch of plastic pieces and screws that you can/should add into different places and/or mounting platforms. I felt like I had ordered something from Alien gear. Turns out not only do none of these things work, but none are needed at least for my application. There were three different inserts for where the top of the slide meets the holster. I can only assume this is to reduce the play or wobble in the gun. None worked and only made reholstering more difficult. They were held in place by a tiny plastic peg, that I wouldn’t trust, anyhow they are labeled s,m,l. Then there was a piece of plastic labeled “for TLR-1”. Since the instructions/paperwork that came with the holster made no mention of what this was or why to use it, I can only assume you’re supposed to use it if you’re not using the TRL-2. To fill the space where the laser would be.  More on that later. It also came with two different height attachments for the thumb drive release button.   There are two different mounting platforms included, a paddle and a belt slide but with plastic things for adjusting ride height/belt size. The mounting platforms are the two that come with most “concealment” serpas that are plagued with problems, but the belt slide is the better of the two, so I attached it with the screws provided and attached the clips for my belt size. 

  Upon inserting the chosen gun, a g19 with trl-1 and Holosun 507c with irons mounted forward, it clicked into place with only a little play, good news! The thumb drive is way too low so I immediately installed the tallest option with the screws provided. I see no reason to not use the tallest option, as it’s the most intuitive, but not quite as intuitive as the safariland als. 

  I then installed the “tlr-1 adapter” since that was the light I was using. This was the best I could figure, since the instruction manual made no mention of this adapter or how to use it. It clicked into place and seemed semi solid, so I figured I was good to go. On draw strike number two the adapter went flying across the room, “must be operator error” I thought, so I spent a few minutes ensuring I installed it correctly, while looking for YouTube tutorials to help, there were none. As far as I could tell, that was the only way to install the adapter.  So I reinstalled it, spending several minutes making sure there was no other way to put it in and it seemed good, then 6 more draw strokes later, it went flying across the room again. No worries though, the gun is retained just as well(as far as I can tell) without it.  I later reinstalled it two more times and on installation number four it seemed to stay put. No idea what the problem was. 

  The draw is smooth enough, again it’s not a safariland, but it’s plenty fine. I certainly appreciated the natural thumb drive motion. Gun is retained well and the retention mechanism seems to be more than adequate for the “gun grab” situation.

 The mounting platform isn’t very comfortable but it’s not extremely uncomfortable either. All that said, the mounting platforms are extremely flimsy and not something I would trust for serious use. But deep in the “box of bad ideas” I had some Blackhawk duty gear, that included some more robust mounting platforms. As it turns out, that doesn’t matter. Blackhawk uses a different thread pitch for their duty stuff than their concealment stuff, so none of it would work without going to the hardware store and figuring out what thread pitch, length and head size screws I would need, a task I had no interest in doing. 

So I snooped around the interwebs and found a video on this holster from Chuck Presberg. He had run into the same issue and confirmed what I had found about screws and thread pitch. He had mentioned a safariland qls hack, so I looked for this. Turns out it’s fairly easy to modify a qls plate to work with the omnivore for mouthing to safariland attachments, which I prefer anyway. A little dremel and drill work and it was mounted and felt very secure. I should point out I wouldn’t recommend this for duty users since I’m sure the plate is somewhat structurally compromised, but it still feels much more solid than the mounting platforms it came with. 

  I carried the gun in this bastardized setup on both a ubl mid and a flex adapter, the draw and overall carry experience was pretty much on par with the same setups, as with a safariland holster. Again, the draw stroke is only slightly less efficient than safariland, but that could definitely be because of the thousands of repetitions I have from the competitor’s holster, so I can’t knock it. Maybe my initial impressions were wrong, maybe this is a quality holster.

  This is when things took a turn. Several hundred draw strokes in, out came the gun but not the light. The light was still in the holster, held in place by the retention mechanism. Since the holster indexes on the light, not the gun itself, there was nothing holding the gun in the holster. Had I fallen or had someone grabbed the gun, it would have come out freely. Extremely concerned, I tightened the screw on the light as tight as I could without tools (streamlight says not to use tools to tighten the light) and added a whiteness mark, with a paint pen, to keep and eye on this. Hoping this was operator error, I continued the evaluation process, checking the whiteness mark every couple dozen draws. About a week and several hundred draw strokes later, my whiteness mark wasn’t lined up. Sure enough, the screw was loose yet again. The holster seems to be unscrewing the light from the gun. Now the instructions say to line up the slot in a specific orientation, I did that, same issue. I tightened it down as tight as I could get it and no issues drawing but it still would loosen up eventually. This is an issue for me. Now, checking the light screw is part of my daily PMCS. I’ve not had this issue with any other light bearing holster. Is it the end of the world? No, but something to be aware of? Yes

  But wait there’s more! Not long after I started the review process, I got word from a friend that his agency (a large law enforcement agent in Florida) had circulated a memo disallowing the use of the omnivore for uniformed and non uniformed duty use, because of the opening at the trigger guard. According to them, it poses a risk for a negligent discharge because the opening for the light is large enough that it’s possible to depress the trigger of the gun while it’s holstered. A Blackhawk holster that can help facilitate a ND? You should see my shocked face. While this isn’t a new issue with light bearing holsters (there are cases of this happening with safariland) I had to explore this and see if the agency was being overly safe, or if this is a real concern, it’s a real concern. With my gun and my hand/finger size, it is absolutely possible for me to get my index finger inside the holster, inside the trigger guard, and press the trigger while establishing a grip on the holstered gun. Uh oh. It should be worth noting that I can indeed press the trigger while the gun is in some safariland light bearing holsters as well, but not while attempting to establish a grip. It has to be from a different angle and is much more difficult. This is a problem. 

  Overall, if you are an instructor that has a need to use a variety of guns depending on who you’re teaching, or need a range holster for reddot guns this might be an okay option to look at. If you carry a weird gun, that safariland doesn’t offer s rds holster for, this might be your only option. If you have to use a Blackhawk, it’s better than a serpa, but all that said, I’d pass on this holster. And I really wanted to like it. 

Firearms Insider Reviews - 8 Key Points

CLAIM TO FAME:  

Near universal retention holster that is red dot compatible

TARGET MARKET:

People needing a retention holster for use with a red dot and light or for a variety of guns. 

FNBS (FEATURES & BENEFITS OF THIS PRODUCT): 

  • Thumb drive retention

  • Red dot compatible

  • Indexes on the light

  • Fits numerous handguns

  • Thumb activated retention

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE?

TLR-1/ TLR-2, x300u, no light(rail still required) 

What others are saying: 

Denis B

5.0 out of 5 stars

Works perfectly with my Glock G22 and S/W M and P 40.

As a range/competition holster this product works great. It's not suitable for duty carry and it says so right in the instructions. I carried a Blackhawk Serpa Level III for years but none of the ranges I shoot at or companies offering instruction will allow it. This has saved me the trouble and cost of 2 rigs. One holster does it all. Very happy with this product.

Anthony M.

NOT SAFE!!! DO NOT BUY IF LAW ENFORCEMENT

I've had this holster for about 18 months now and it seemed okay, a little wobbly but overall a good fit, as the time passed it became more and more loose and I had to tighten the screws every other day. Well today, I got in a foot pursuit with a dangerous felon and the piece that secures the gun to the holster snapped off causing my gun to fall out. The part that attaches to the picatinny rail detached from the rail and remained locked into the holster. My gun fell out WHILE IN A FOOT PURSUIT!!!!! This could've very well cost me my life. Because of this, I no longer trust this holster or any holster that attaches using the picatinny rail. I will immediately get rid of this holster and purchase a safariland holster.

Price point:

MSRP - $59.99

 I need it now availability:

Blackhawk, Amazon

Our Rating:

Pros

  • Near universal

  • Thumb drive retention

  • Red dot compatible

  • Actually available for purchase without a 90 lead time (Safariland, looking at you) 

Cons:

  • Mounting platform

  • Trigger guard opening

  • Unscrewing the light

  • Slight play 

Score: 5.00 Mediocre

For duty/serious use: 3.00 Awful

50.jpg


, ,

Bravo Concealment Holster (IWB and OWB)

, ,

  Bravo Concealment bills their holsters as “the best in everyday concealed carry.”  When they offered to send me a holster to review my expectations were high, however, when I received the IWB holster, at first, I was ambivalent.  

  The holster is constructed from two pieces of Kydex which are joined together by four screws that also hold the belt clips in place.  The following items were in the bag:  

  • IWB Kydex Holster (for Glock 17)

  • Single magazine holder

  • Extra fasteners

  • Two additional belt clips

  The pistol is aligned vertically with the holster shell (i.e. no built in cant) but the belt loops are adjustable for ride height and cant angle.  The belt loops are at an offset angle to allow for better concealment (they call it Torsion Technology). The pistol fit securely in the holster with no slack or rattling.  A loaded magazine was inserted in the pistol and holstered. I tried to shake the pistol loose but was not successful.  

  The holster was comfortable to wear and the pistol could be inserted and removed with ease.  I am overweight and most IWB holsters are uncomfortable, particularly when seated. With this holster I experienced a little discomfort, but not nearly as bad as others.  

  I used this holster for a few months, took it to several training classes and it worked fine.  Drawing was simple and fluid and I could re-holster without sweeping myself (important for use on ranges).  

  In addition an OWB holster was ordered for review (paid for by reviewer).  This holster is larger than the IWB model and pistol is slightly canted forward in the shell.  Similar to the IWB the holster can be adjusted for ride height and cant, although not as much as the IWB holster.   

  This holster was used in a training course without prior testing (a mistake on my part).  The holster held the pistol a little too tight, which resulted in the pistol pulling up the holster when drawing.  This caused me to use my left hand to hold the belt down to aid in drawing. The instructor informed me that I was dangerously close to sweeping my hand, which would result in disqualification, so i changed the holster to the IWB model.  

  When I returned home customer service was contacted.  They asked me a few questions to verify I was using the proper firearm, belt etc.  Once this was established they promptly provided a prepaid shipping label to send the holster back to be repaired.  Once the issue was corrected the holster was returned, at no cost, and the draw was much smoother. This is great customer service. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Kydex IWB holster

Target Market:

Anyone who is looking for holster for their pistol  

FNBs (Features & Benefits of this product):

  • Belt Clips are adjustable for ride height and cant.

  • Currently shipping with a fee magazine holder.

  • Reasonably priced.

  • Available in Left and Right hand holsters

  • Available in Glock, Smith & Wesson, SIG and several 1911 platforms.

What other aesthetic options or finishes are available?

Black

What others are saying?:

63 reviews give it a 4.7 out of 5 stars on Amazon.com 

Link to other reviews:

Amazon.com

Price point:

MSRP = $49.99

Retail = Currently on sale for $44.99 from manufacturer.  

I need it now! Availability:

Bravo Concealment website - $43.39 with extra mag holder

Amazon.com - $39.99 with extra mag holder

Our Rating:

Pros:

  • Currently shipping with magazine holder,

  • Designed for multiple platforms

  • Can accommodate lights.

  • Available for left-hand use.

  • Lightweight

  • Easy to draw from concealment. 

  • Great customer service.

Cons:

  • Not currently making models for FN pistols. 

  • Belt clips do not work with belts > 1.5 inches

  • Only comes in black.

Score:   8.5 Great

85.jpg
, , ,

KnightFall Customs OWB Teklok holster

, , ,

I was looking around for an outside the waistband (OWB), competition-ish style holster when I ran across KnightFall Customs. Since they made one for Polymer 80 style pistols, I sent off an interest email. I hadn’t found many holster manufacturers’ that made the style holster I was looking for. KnightFall Customs sent this one for review, and it is appreciated.

  As one would guess, this is a molded Kydex holster. The OWB holster KnightFall sent was their OWB Teklok / Paddle, in black, but other colors are available. The holster is nicely molded. So much so, that it flows nicely around the contour of the pistol. There are no really sharp edges. If you like polished edges on your kydex, you can get it as an option. It is also open at the bottom so that longer / compensated pistols will fit. The molded in sight channel is very tall and will allow for “suppressor height” sights.  Lead times can vary, but they are still usually fairly short compared to some other holster manufacturers. 

  Now for the real reasons I wanted to try out the holster. First, it could be had with a TekLok belt mount. The Bladetech TekLok, is adjustable for different width belts, and then it actually has a little fold up lock to keep it on your belt. Mounting a TekLok, on a holster, also sets the holster farther away from your body. I’ve used the TekLok before, and so for a “competition style” holster, this was great. The zero cant was also a feature I was looking for. I like straight draws when using a holster for competition. Since I have a mini red dot on this particular pistol, I needed a holster that had an “RMR” option. The KnightFall has an RMR option, which cuts out the front of the holster to allow for the sight. This also can make the pistol presentation quicker, by allowing the gun to clear the holster sooner. This holster also has 2 tension adjustment screws. A nice feature for someone running different pistols in the same holster, like me. 

  This KnightFall holster is for a Polymer 80 PF940v2 with a 17 slide. Basically a fullsize pistol. Being that it has an open bottom, I was also able to fit my compact Polymer 80 in it, with the compensator. It also fits without the comp. I would have liked the holster to come with more drop, but that’s me. The holster makes the pistol ride about halfway above, and halfway below the beltline. I didn’t have any problems using it this way, just a personal preference.

  I really like the function of the Knightfall holster. Draws are super smooth, partly because of the adjustable retention. The pistol “snaps” in and out no matter where the retention is set. A testament to the molding process. I have shot 2 steel matches and one other match with the Knightfall. During these matches I carried the gun for at least 5 hrs. At no time did it feel uncomfortable, nor did I worry about the pistol falling out if I bumped up against it. I am also able to get a full grip on the pistol before the draw stroke. There is no extra kydex in the way, and the holster is cut upward a little too allow for the P80’s undercut trigger guard. 

  KnightFall Customs makes other style holsters also. If you’re in the market for this style of holster, or any other style, I would go check them out. Prices are on par with other places and the quality is top notch.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Outside the Waistband holster with Teklok mounting

Target Market:

Competition shooters, Tactical Carriers

FNBs (Features & Benefits of this product):

  • Kydex

  • Teklok belt mounting

  • Options for Polymer 80’s

  • Straight Cant

  • Optic sight cut

  • Adjustable retention

  • Made in Alaska

What other aesthetic options or finishes are available?

Patterns, Colors, and Cuts

What others are saying?:

Adam at Knightfall Customs 5/5 stars

MY FAVORITE HOLSTER FOR OWB

I was having a hard time finding a holster for my P80 build with a compensator, then I saw these and thought I'd give it a try. Customer Service was very responsive, and even did custom mounting holes for the Safariland QLS system. Very happy with it, will be buying another soon for a G34 P80 bild.

Link to other reviews:

Nothing found for this particular holster

Price point:

MSRP = $69.99

I need it now! Availability:

Knightfall Customs

Our Rating:

Pros:

  • Optics cut out

  • Adjustable retention

  • Open bottom

  • Teklok

  • Available for Polymer 80, Faxon, and Grey Ghost pistols

Cons:

  • Lead time can vary

  • $5 for polished edges

  • Would like more drop from beltline

Score: 8.00 Great

80.jpg

Favorite Link:   Atibal

, , ,

Werkz M2 holster for Polymer80

, , ,

 Werkz holsters is a small kydex company located in Princeton Idaho. I first heard of them on the Handgun Radio podcast. Werkz makes of variety of formed holsters and accessories. From custom to off the shelf, they have you covered. Werkz sent me one of their M2 IWB holsters for a Polymer 80 PF940c and a M2 magazine carrier for this review.

 The M2 holster is a taco style design with some other features. A taco style holster is one that is made out of one piece of material, then folded over a mold, hence the taco name. A feature that I didn’t think I would use was the ability to convert it to an outside the waistband (OWB) holster. I found this actually quit useful when I realized that this was the only holster I had for my Polymer 80 and needed it OWB. I switched the clip to the other side. To do this, one just removes the two screws holding the clip on, and moves it to the other side. The M2 has clip locations at two heights and an angled location also. I ran the holster IWB with it angled or canted forward. This resulted in the main dislike of the holster. The clip doesn’t completely rest against the holster. It hangs about halfway off. When wearing it in this config, I felt as if it didn’t have as much surface area holding onto my belt and was also easier to take the holster off of the belt. When using the M2 in the straight upright position, this was not a factor.

 I must admit, this is one of the nicest finished holsters I have used. The edges are smooth, and I mean real smooth. It has some sort of texture on the outside. The Werkz logo is etched or laser engraved into the kydex. There are bosses where the clip is screwed on. It is open at the bottom so that a longer, or threaded barrel, will fit. The sight channel is really tall to clear suppressor height sights. It is even clearanced for a micro red dot sight.

 I’ve worn the M2 on and off since receiving it. It holds the pistol very nicely with good retention. One can adjust the retention somewhat by tightening or loosening the tension screws. The M2 does seem to print some under a T-shirt, or any thinner shirt. That is why I only wore it off and on. If I had a jacket on, no problem, but I usually just wear a T-shirt as a cover garment. I mainly wore it at the 2:30 to 3 o’clock position. Angling the pistol/holster combo forward didn’t seem to make it print any less. After about 3 days of wearing the M2, my body adjusted and it was comfortable, at least somewhat. I like how the M2 only has one wide clip, it makes it easier to locate exactly where it is the most comfortable. The M2 is a small holster, Werkz even calls it minimalist, and I’d have to agree.

 As I also mentioned, I wore the M2 as an OWB holster also. This is also when I mainly used the M2 mag carrier. I wore the M2 at a local Steel Challenge match. I was concerned using it with just the single clip. After 25 draws and reholsters, I am no longer concerned at all. It performed well as an OWB rig.

 Now a little about the M2 magazine carrier. The mag carrier is also a taco style and holds the magazine vertically. It is currently only offered for 9mm/40 Glock style magazines. As with the holster, the mag carrier clip is also reversible for IWB/OWB. I never reversed the clip, I just turned the magazine around and it worked fine. The M2 mag carrier is of the same high quality as the M2 holster.

 If you are looking for a good quality, and inexpensive holster, give Werkz a look. If the M2 is in stock, it is one of the “quick ship” holsters. So you can have it quickly also. They will also do custom holsters, if that’s what you’re looking for.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Minimalist Kydex Holster

Target Market:

Those needing a decent holster

FNBs (Features & Benefits of this product):

  • IWB - OWB convertible

  • Kydex

  • Adjustable clip height

  • 1.5” belt clip

  • Straight or canted

  • Adjustable retention

  • Useable with slide mounted optics

What other aesthetic options or finishes are available?

With or Without some rail mounted lights and colors

What others are saying?:

One holster to do it all. 5/5 stars on Amazon
By Dan S
Awesome holster. Ambidextrous carry options for every situation and adjustable retention. So far this is the only holster I could find that can AWIB and strong side OWB carry without replacing any parts, just moving some screws and bushings. Comfortable and has minimal printing. Also, you can't beat this price. Nearest comparable product from a reputable source is going to cost more for less features.

Link to other reviews:

None for this particular holster

Price point:

MSRP holster = $42.50

MSRP mag carrier = $30.00

Retail = $50.00 on Amazon

I need it now! Availability:

Werkz or Amazon

Our Rating:

Pros:

  • Great construction

  • Adjustable retention

  • Adjustable cant

  • Convertible between IWB and OWB

  • Price

Cons:

  • Holster prints

  • Clip

Score: 7.5 Good

75.jpg

 

Favorite Link:   Triggrcon




 

, ,

Werkz M2 w/TLR-1 Holster

, ,

Written by: Zane Mungillo

     Finding a good holster can be hard.  It’s such a personally dependent thing. There is a reason I have two large drawers full of them.  What is a great choice for me may be entirely wrong for you. It’s for that reason I approach holster reviews a little differently than other products. All holsters, in my opinion, should have the following qualities to even be considered for concealed carry:
•completely cover the trigger/guard
•allow for a full firing “master” grip on the gun while holstered
• have positive retention of some kind
•be made of either leather or kydex (not both) 
•allow for one handed reholstering. 
•firmly attach to the belt or pants
    
 Had the Werkz not “passed” these requirements, I would not have continued the review. 

     The Werkz holster took me on an emotional roller coaster if you will. A variation on their m2 iwb (customized for my gun and light) the holster, at first glance, appears to be very well crafted. All edges were buffed and perfectly smooth. It’s comes with a 1.5” injection molded clip that can be mounted at two different ride heights, straight draw or canted forward or backwards. It also has two tension screws for adjusting how much passive retention is on the gun/light combo. Retention is good when set to my preferred stiffness and a solid audible and tactile click is present when the gun is inserted, I knew I was going to love this holster. 

     That is, until I put it on, while extremely comfortable I couldn’t conceal the gun. The grip printed horribly in my typical dress, shorts and a t-shirt. Standing a boring 5’10” and weighing in at around 150 lbs I realize that I’m asking a lot of a holster to conceal a g17 in my extra medium t-shirts.  To give the holster a fair shake, I wore a slightly larger shirt a few days a week and carried around the house and at the range where I’m much less concerned with printing. 

     After about 2 months, when taking the gun and holster off I noticed the two tension screws had completely backed out and where nowhere to be found. The gun still had plenty of retention while in the waistband but this was concerning to me. To be fair I didn’t apply loctite after setting the desired retention so I chalk this up to that.  Since I used to make holsters in my shed, I have plenty of Chicago screws and such laying around so I replaced them and applied loctite this time (like I should have as soon as I got the holster).

     I decided to “modify” the holster at this point to make it more concealable so I superglued a pair of Dr. Scholls pads  to the inside portion and glue a furniture slide pad to the front inline with the belt clip. This both tilted the grip into my stomach but rotated the grip around. Werkz now offers a claw to accomplish the rotation of the grip and a quick google search of “the aiwb holster hack, Limatunes” will show you how to do the Dr. Scholls hack. I in no way removed material or heated the holster as to compromise the function of it. I simply added a wedge and a claw. 

     The holster now works fine with my typical dress and I’m very pleased with it.  I have over a thousand drawstrokes from it over the course of much dryfire and many range trips as well as about six months worth of  carry. I’m carrying it everyday for now until the next new hotness comes around that I have to try. 

FIREARMS INSIDER REVIEWS - 8 KEY POINTS

CLAIM TO FAME:  

Holsters made with little extra bulk and fast turnaround time, even on custom orders

TARGET MARKET:  

Concealed carriers 

FNBS (FEATURES & BENEFITS OF THIS PRODUCT):  

  • Meets my requirements for a good holster
  • Well made

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE?

Black, Blue, coyote brown, dark gray, FDE, olive drab, carbon fiber black, carbon fiber blood red, carbon fiber coyote, carbon fiber fde. 
Firearm and light options
1.5” or 1.75” clip 

What others are saying:  

Couldn’t find anything for this particular setup (g17w/trl-1) 
The only other reviews I found were on amazon and they tend to be hit or miss. 

Price point:  

MSRP - $42-80 depending model and options.

Retail - Same

I need it now availability: 

Werkz.com - Ships next day on in stock, 2-5 days for quick ship customs and 10 business days on completely custom orders.

Our Ratings:

Pros: 

  • Works as advertised
  • Holds gun securely


Cons: 

  • Not as concealable as other holsters I’ve tried 


Score: 7.50 Good

6.5 before modifying 8.5 after for an average or 7.5

75.jpg
,

Raven Concealment Eidolon

,

Written by: Zane M.

Selecting a holster can be a daunting task. Anyone who is serious about carrying a firearm probably has at least one box or drawer full of holsters that have fallen short in one way or another. I have two and half dresser drawers full of bad ideas and borderline junk myself.

  About a year ago I decided to try the  appendix inside the waistband(AIWB) position for various reasons. After trying a few holsters that I found and a few I made without much success, I reached out to some friends in the industry for suggestions.

  Highly recommended was the raven concealment systems eidolon. One of my friends had one he wasn’t using anymore so he sent it my way for some testing and evaluation. If you’re not familiar with the eidolon it is extremely user configurable. So much so it can be intimidating but it’s comes with a user’s manual and I recommend you read it.

  I kept the holster in the configuration it came to me in: a single belt strut(molded clip) and the RCS claw. Both soft loops and over struts can be used. Typically I’m a fan of soft loops but I have nothing against struts so I chose to keep it as configured. Other options include a wedge for pushing the top of the gun into your body, the claw(that I did use) for rotating the grip towards your body and wings so the holster can be configured for hip carry. The holster can be used right handed or left handed by simply switching out the mounting hardware. The holster is available for a wide array of guns as long as it’s a small frame glock that is to say double stack 9mm/.40/.357sig/.45gap (people use .45gap?) the model I have is cut to glock19 length with an open bottom. The majority of the testing was done with a glock 17, I also used it with a glock 26 for  comparison sake.

  At this point it’s worth mentioning I stand a staggering 5’10” tall and am weighting in at a whopping 150lbs, in other words, I’m not a big dude. The holster is comfortable and extremely good at concealing the gun. It covers the trigger completely but still allows for a full firing grip while the gun is holstered, even with a custom undercut on the trigger guard.  The strut is well made and after several hundred draws never once did it slip off the belt. As I was using a g17 there was about a half of an inch of slide sticking out the bottom of the holster, however I didn’t find this to be a problem. RCS offers a version with a closed bottom for the g17 size guns if that’s an issue for you. The gun stays in place, even with only one belt strut, and the rcs claw really does wonders for rotating the grip into the body making concealment of a full size gun not only possible but easy.   With the g26 the gun literally disappears.) If I were to continue to use the holster for every day use I would probably add a 2nd strut or even use two tuckable soft loops (available with the full kit or from RCS) I did add a strip of Velcro to put a foam wedge on, even though RCS offers a wedge I chose this route for the simple reason that I had the wedge already for another holster. A g26 in the eidolon is my go to non permissive environment rig (all federal, state and local laws followed of course) but no longer use it for the g17. The only reason for this is I now carry a weapon mount light and this holster doesn’t allow for that.

  If you’re looking for a user configurable, AIWB holster for your glock, you should take a good look at the RCS eidolon.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

A comfortable user configurable  AIWB holster for compact and full size glocks.

Target Market:

Anyone with a need to conceal a 19/17 size glock. Concealed carriers, off duty law enforcement and special operators with the military/security forces

FNBs (Features & Benefits of this product):

  • RCS claw and wedge

  • Completely covers the trigger but still allows for a full firing grip even with an undercut.  

  •  User configurable   

  •  Injection molded

What other aesthetic options or finishes are available?

Black or Limited clear at time of writing

What others are saying?:

From raven concealment systems website

“I ordered the G17 Full Kit for my G19 MOS w/ Trijicon RMR. It's a solid product! Shipping was fast and craftsmanship is top notch. My favorite holster to this day. I went ahead and ordered the soft loops too.”

Amazon review

“Ok like most everyone else I've been trying to make the switch to appendix carry. Finally after 6 different holsters I am appendix carrying. This holster is comfortable and most importantly it doesn't print. It literally disappears. I will say I bought the clips and they didn't work. I had to order the soft loops to make it work. I could never get the clips in the "right" position. Save yourself some money and buy the soft loops from the start. I paid $25 to order the soft loops after the fact when I could have gotten them for less than $10 by just ordering them with the holster. At the end of the day I can now carry off duty in the appendix position comfortably.”

Link to other reviews:

Breach Bang Clear

Price point:

MSRP = $59.99-149.99

Retail = $54.24 on Amazon

I need it now! Availability:

Raven Concealment and Amazon

Our Rating:

Pros:

  • user configurable

  • Super comfortable

  • Very well made

  • Cut for use with RMR/RDS

  • Tall sight channel

  • Mag release guard/ but not covered

  • Tuckable

Cons:

  • Only for glocks

Score: 9.0 Amazing

90.jpg
, , ,

RPS Tactical Adaptive Holster Review

, , ,

Everyone has been there; the drawer or tupperware container full of holsters. You’ve tried numerous ones, and there is always some sort of issue with them. The holster is too bulky; the holster doesn’t have any flex to work with your body shape; it only allows for one method of carry or storage. RPS Tactical has addressed these issues. Located in Fairfield, Maine, RPS Tactical was started by a local LEO and his brother, with a focus on making holsters, belts & nylon gear along with many other custom items. I spent some time with Rob and his brother Nick and discussed the way they make their holsters, as well as the way they hand stitch their belts. Their attention to detail and commitment to quality is very apparent in the way they make their items and the final product they put out. They are also willing to work with the customer. When I wanted to get a holster made by them, they didn’t have the mold for my Steyr C9A1 (most people don’t) and they were willing to let me bring my firearm over for them to mold the holster. I know another individual who had a specific need and they worked with him to get the holster and belt exactly as he wanted it. With the owner of RPS Tactical being a law enforcement officer, they have a really good understanding of what goes into comfortable everyday carry of firearms and other gear.

I did a podcast with the guys at RPS and they made me the Adaptive Holster for my Steyr for me to evaluate. I spent almost 8 months carrying my Steyr with the Adaptive holster in the IWB and then the OWB configurations. I had long road trips in the car, range trips, working outside, going on walks with my wife and son & pretty much every single other everyday thing you do. The Adaptive holster is a kydex shell with a sturdy leather  backing. On the body side of the backing material is the soft side of industrial strength velcro. This allows for various mounting options if you purchase the corresponding velcro patches that can be affixed to any surface. For my body type, I found the OWB configuration worked better for me. I carried setup as IWB from June to about November, when I switched to the OWB configuration as the weather got colder and I could start wearing jackets. The IWB worked good, but with my body type I’ve found that IWB can be uncomfortable over extended periods of time. I am confident other people that don’t have issues with IWB carry will find the RPS Tactical Adaptive holster very comfortable.

 

During my time wearing the holster (and I am still wearing it to this day) i noticed no abnormal wear or any hardware backing out or failing on it. Everything was very sturdy, reholstering was very easily accomplished, and the trigger guard was suitably covered. The kydex is molded to your specific firearm, and the retention was fantastic.  As with most high quality holsters, the leather backing was cut to allow for a full grip on the firearm prior to drawing.

One thing I will also note is the soft side velcro backing. While it is there for the mounting options as we discussed before, it also makes for very comfortable carry if the holster is directly against your skin. I, like many people, do not enjoy having a tucked in shirt. I have used other holsters that have the large leather backing and oftentimes found that when they were against bare skin that there was a lot of perspiration and discomfort especially in the hot summer months. It seems like the soft velcro backing on the body side of the holster allows some air to get in between the backing and your skin, preventing any perspiration or discomfort from occurring. For those of you who like to wear a tucked in shirt, the IWB configuration is tuckable as well. There are other carry options for the adaptive holster as well, including a paddle mount or  purchasing the RPS Tactical Shoulder harness and using your existing holster as a shoulder holster.

If you are looking for a very high quality holster (or any other pieces of high quality gear) from a fantastic small business, look no further than RPS Tactical. Their commitment to their products long after it has left their shop is telling. I have had multiple people come back to me after I have steered them toward RPS Tactical for their holster needs and tell me that they were so happy to work with RPS. Rob and Nick were very attentive to their needs and oftentimes they ended up getting fitted out with belts and other items above and beyond what their original request was. That speaks volumes as to the character and dedication that the guys at RPS have to customer satisfaction. I was very happy to evaluate their holster, and would highly recommend their products to my friends and family, for both duty & EDC use.  

FIREARMS INSIDER REVIEWS - 8 KEY POINTS

CLAIM TO FAME:

Adaptive Holster System (Various Mounting Options)

TARGET MARKET:

Those wanting a high quality holster for everyday carry that can be utilized in a variety of ways.

FNBS (FEATURES & BENEFITS OF THIS PRODUCT):

  • Convertible between IWB & OWB

  • Tuckable during IWB carry

  • Soft side velcro backing against the body

  • Sturdy leather backing with cut to allow full grip of firearm before drawing.

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE?

Various color options/finishes including Kryptek, Carbon Fiber, Coyote Tan & more

LINK TO OTHER REVIEWS:

Tactical Toolbox Review

PRICE POINT:

$65.00 (various options may be extra)

I NEED IT NOW! AVAILABILITY:

RPS Tactical LLC

OUR RATING:

,

L.A.G. Tactical "The Defender" IWB/OWB holster

,

  A while back I ran into L.A.G. Tactical. I had heard of them before, but was able to talk with them at the Axelson Tactical grand opening event. I really liked what I was seeing. Later I contacted them and they agreed to send me a holster for review. All of their holsters and accessories are made from Kydex here in the U.S.A.

  Now, as most holster manufacturers do, they make a bunch of different styles and colors. I chose the Defender model in O.D. Green. The Defender is L.A.G.'s combination Inside the waistband (IWB) / Outside the waistband model (OWB). The way they do this is really quit simple, basically they send IWB and OWB belt clips with the holster. Being a style of pancake holster, it uses rivet holes on each end to attach either belt loops or hooks. All the necessary hardware is supplied. Loctite is recommended when attaching the screws, but some of them come with thread locker already on them.

  What sets L.A.G. apart from other holster manufactures is their actual attention to detail. When you go to order one of these holsters, they have drop down menus that ask you just about everything to make the holster fit correctly. Of course one of them is what gun model, of which they have plenty. But some of the other menus are what surprised me. First of which is where the holster will be carried, 2-3 or 3:30-5 o'clock. Then they have a menu for what side of the firearm is the magazine release on. The angle you would like the firearm to sit, 90°, 10°, or 20° cant. Next comes if you are primarily using it IWB or OWB. Now for what I thought was really great, they ask your waist size so they can get the curvature closer to what you need. Along with this, they ask is if you are Male or Female. Then they have a box for special requests. You also can choose separate front and back kydex colors. And last, the size and type of belt loops.

 One can also select the thickness of kydex for the holster. They have standard at 0.060" and heavy duty at 0.080". I chose the standard. But if I had to do it again I would have chose the heavy duty. I like the feel of the thicker kydex and the standard kydex seems to flex a bit. But if it is used primarily as an IWB holster, this flex should make it more comfortable. And since I wore it as both, It did work well as an IWB holster. But I prefer it as an OWB rig.

  The quality of this holster is fantastic. The guns fit inside the holster is great. Draws from both IWB and OWB are nice and smooth. Reholstering is easy thanks to a slightly flared top. The Defender has an adjustable screw tension. So if you want more or less resistance, it is possible. The kydex if formed nicely. Since mine is for a 1911, they have a nicely molded cover over the safety and mag release. I really liked the covered safety as it makes it way harder for the safety to accidentally come off, it also doesn't jab me in the side. The front and rear pieces are also nicely trimmed and smoothed together.

  I carried the holster IWB off and on for about 3 months. It works nicely, and actually made carrying a full size heavy pistol not so bad. It did take about a week for me to get use to wearing it IWB. Having the ability to adjust the ride height helps with the comfort. When I switched it to OWB, and used it at a few pistol matches, it worked very well. Do I have any problems with this holster? Not really, but it does make a better OWB than IWB. But you can't have your cake and eat it too.

  L.A.G. Tactical has also gotten some new publicity in partnering with Tactical Insider and Craig Sawyer on a special Defender series holster. If you are in the market for a good quality kydex holster, do not overlook L.A.G. Tactical. I personally would buy a holster from them or send someone their way. Plus as a bonus they can be purchased from Cabela's, but without all the options available at L.A.G. Tactical's website.

 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Kydex Inside / Outside waistband convertible holster

Target Market:

Concealed carriers, IDPA shooters, or General range use

FNBs (Features & Benefits of this product):

  • Kydex

  • Inside waistband carry

  • Outside waistband carry

  • Supplied with both belt clips

  • Adjustable retention

  • Semi-custom for body fit

  • Color options

  • Thickness options

  • Made in USA

  • Adjustable ride height

What other aesthetic options or finishes are available?

Lots of different color and pistol models available

What others are saying?:

Outstanding Holster 5/5 Stars @ LApolicegear.com

I use this LAG Tactical holster set up for IWB with my S&W Shield. Very well made product. all edges are smooth. Molded for perfect fit with my pistol. Very comfortable, even when against my bare skin this summer. Highly recommended!

Pros: Holster completely covers muzzle and front sight -- a big plus in my opinion. Top of outside edge is flared just a bit and that makes "finding" the top of the holster and getting the pistol back in during re-holstering a breeze. Kydex is stiff enough so, when worn, holster holds it shape when pistol is removed -- making re-holstering easy.

Cons: None!

Great holster 4/5 Stars @ LAGTactical.com

Great holster,very comfortable, tight at first but now it is perfect and still retains my pistol very well, has served me well so far, if you are in and out of vehicles all day i would recommend getting thicker kydex as mine is starting to crack, around the trigger guard but that is to be expected as my pistol grip catches on the vehicle during enbus/debus, but i think the next thickness would mitigate that.

Link to other reviews:

LAG Tactical The Defender VP90 @ MajorPandemic.com

Price point:

MSRP = $79.95

Retail = $69.95 @ LAPoliceGear.com

             $69.99 @ Cabela's

I need it now! Availability:

L.A.G. Tactical, LA Police Gear, or Cabela's

Our Rating:

Pros:

  • Available options from L.A.G.

  • Adjustable Ride Height

  • Adjustable retention

  • Convertible from IWB to OWB

  • Includes both style belt loops / clips

  • Semi Custom fit

  • Flared top opening

Cons:

  • Standard Kydex thickness

  • Better as OWB

Score: 8.5 Great

 

Chad’s Favorite Link:  Axelson Tactical

 

, ,

Black Iron "ALLY" IWB Holster

, ,

  Any one who has considered the idea of carrying a firearm for protection, has had to look into holsters. Almost always, this ends up with a drawer full of unused holsters. The people over at Black Iron Holsters have made the job of choosing a holster a little bit easier with their ALLY series of inside the waistband (IWB) holster.

  The Ally IWB holster is one of the most comfortable holsters I have worn. I am not sure exactly how to describe the ALLY, but think hybrid holster on steroids. The first thing you notice on the holster, is the padding on the back, or the side that rides against your body. This padding is an UnderArmor moisture wicking fabric sewn over perforated padding and then mounted on the flexible kydex core. The padded fabric is said to pull sweat away from the body and make for a cooler drier holster. I did notice that I didn't sweat as much on the holster backing when it was hot outside. But the holster did seem to feel warmer than some other types. The ALLY also doesn't seem to feel cold either, like some all kydex holsters do. 

  When they construct the holster, they use the above mentioned padding, but with some extras. They call it C-Pak. C-Pak adds in a flexible kydex core, 500 denier Cordura fabric, and the moisture wicking and padding mentioned above. All of this helps add to the comfort and usefulness of the holster. The whole holster, except the backing, has been wrapped in the Cordura nylon. This cordura wrapping actually reduces the effects of holster wear on the firearm by giving the firearm something besides the kydex to rub on. They also sew on a border around the whole holster. This border helps smooth the outer edges so that nothing can catch on the them.

  When I mentioned hybrid style on steroids, here is what I mean. The holster is constructed with a large backing plate and then the outer holster is attached to it. But all of this is wrapped as mentioned above. They also put in a tension adjustment screw so that you can adjust it to your preference. The backing on my supplied holster has 3 holes for each clip, it has a front and rear clip. These holes make it possible to adjust for ride height and cant. Also the supplied nylon clips have 2 mounting screw options for even more adjustment. Even with the clips mounted in the same holes on the backing plate, the cant of the firearm is pretty noticeable. I did have a problem with the screws, that the clips are mounted to, coming loose. I put thread locker on them, but got some on the nylon clips. DON'T get threadlocker on the clips, it might make them crack and break like in my case. I emailed Black Iron and told them what I did, within a few days they had sent me new clips. I was just going to use some others I had around here since it was my fault they broke. So a big +1 for customer service.

  Aside from this being a very comfortable holster, it is also very functional. This holster has a little bit of break in time associated with it, like 2-3 days. After that, I didn't really even notice it. One of the great features of the ALLY is that the holster mouth doesn't collapse when the pistol is removed. Thus making reholstering safer and easier. Holstering the pistol was a little strange at first, I kept wanting to here the audible click like most hybrid or kydex holsters. But it felt more like an all leather holster. Don't be worried about this holster printing either. It has a very smooth profile. I did notice that it is slightly thicker than some holster due to its padding and cordura, but the smooth profile made up for this. It is hard to notice this holster being worn. I usually only hide it under a T-shirt and that works well.

  Now, the ALLY comes in the four different fabric colors listed below. But don't fret, they seem to make this holster for just about every popular, and even other not so popular handguns. Also with options for various weapon lights. If they don't list your handgun, their website says to contact them, which makes me think they will do their best to help you out. So if your in the market for a nice IWB holster, give Black Iron Holsters a look. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Soft/Comfortable Inside the waistband kydex holster

Target Market:

Concealed Carriers

FNBs (Features & Benefits of this product):

  • C-Pak Backing
  • Cordura wrapped
  • Hand washable
  • Made for each individual firearm
  • 1.5" clips
  • Adjustable for ride height and cant
  • Tension adjustment
  • Breathable
  • Flexible
  • Cerakoted hardware
  • Made in U.S.A.

What other aesthetic options or finishes are available?

Coyote, Multicam, and Multicam Black

What others are saying?:

Great Holster, Buying More: Roger from BIH 5/5 Stars

I received my holster 2 weeks ago and this is by far hands down the greatest holster i have ever used. It fits like a glove both on myself and for my glock. It is everything described and more, i am a delivery driver and spend the majority of the time on the road getting in and out of my truck. I can honestly say by the end of the day it was so comfortable i completely forgot i was wearing it by the end of my shift. I will be swapping out my Alien Gear holsters for my other two guns and will be ordering everything from you guys from now own. Its well worth the few extra bucks for something that is of this quality.

Great Products and Service: Timothy from BIH 5/5 Stars

First of all let me say that my experience with customer service was exceptional, I had a lot of questions concerning which style of holster to purchase and what was going to work for me. The staff at Black Iron was very knowledgeable and evidently knew what questions to ask and how to explain things because this is the best fitting and most comfortable holster i have ever worn. If you have any doubts about buying one don't you will be blown away by these things.

Link to other reviews:

Nothing found while googling

Price point:

MSRP = $79.95

I need it now! Availability:

Black Iron Holsters

Our Rating:

Pros:

  • Comfortable

  • Holster mouth stays open

  • Flexible

  • Adjustable retention

  • Tuckable

  • Adjustable Cant and Ride height

  • Firearm options (lights, lasers, models)

Cons:

  • Sewing of fabric looked poor (Not straight)

  • Slightly thicker

  • Clip mounting screws come loose (Maybe supply pre-threadlocked screws)

 

Score: 7.5 Good

 

Chad’s Favorite Link: U.S. Tactical Supply  

 

 

 

Alex & Ryan Design Kydex Light Bearing Holster

I first heard of Alex and Ryan Design from my friend who bought a cuff holster from them. I looked into them a little bit and sent a few emails back and forth. After getting their advice(they answer their own email) I ordered the holster featured here and a double mag holster for IWB. I very promptly received an email from Alex saying that he thought it’d be more comfortable if I had 2 single mag holsters.

IMG_0508.JPG

I went with his recommendation as he’s the expert. When I received the product I was a little shocked that it came in a plastic shipping bag as opposed to a box but my fears were immediately set aside as I inspected the holsters for damage. They’re definitely strong and durable to travel through the postal system unscathed. I grabbed my Glock 19 with Inforce APL and quickly, yet safely, inserted it into the holster, and then the whole contraption into my pants. I decided that it needed more retention so I removed it and tightened it with a coin, like many other smart designs allow. After some trial and error I got it to a retention level that I felt comfortable with.

The inside of the holster is smooth and allows for quick retrieval of your weapon while the outside has the familiar feel of kydex, rough yet soft. Wearing this has been a breeze and comfort has never been an issue. I've since wore it to two weddings, one of which I was a groomsmen, and no one had a clue. I recently tripped while running and the holster held up, kept my firearms secure, and only suffered some light scratches. A nice thing about its design is that I’ve successfully carried this setup as appendix, on the hip, behind the hip, and small of back positions. The clip on it is very sturdy yet still flexible to enough to bend far beyond any belt they can accommodate. I’m unsure of a way to make it any better without the addition of adjustable cant.

Claim to Fame: Comfortable and quality holster

Target Market: Concealed carriers

FNBs:

  • Custom made to your setup
  • Many firearms choices
  • Adjustable retention
  • 10 degree cant optional(non light bearing)
  • Options for different lights
  • Suppressor sights chanel optional
  • Optional lifetime warranty on all parts and hardware
  • 3 different sweat guard heights

What other aesthetic options or finishes are available?

There are too many for me to list so here’s a couple cool ones: Multicam, Tiffany Blue, 9 Kryptek designs, classic black, and many more.

What others are saying?

You can find reviews on their site for this holster

Price point:

$48.99 and up depending on options chosen. $65.99 as designed in this review.

I need it now! Availability:

It’s a custom made product so it takes 2-3 weeks to produce depending on their other orders. There is an option for rush orders and they’ll ship in 3-5 business days.

Our Rating:

Pros:

  • Tough design, .080 thickness
  • 100% American made using American made hardware and equipment
  • Full combat grip
  • Easy reholstering (kydex retains weapon shape)

Cons:

  • Preset 0° cant on light bearing, 0° or 10° degree cant on non light bearing
  • Neutral: At the time, it wasn’t offered at Appendix with RCS claw. It is now offered as such.

Score 8.5

 
,

Osborn TacticalTuck IWB holster

,

  So a few months ago I was looking for an IWB holster for a SCCY pistol. I was specifically looking for a hybrid style and ran across Osborn Holsters out of Texas. They pretty much only offer hybrid style holsters. Some of them even have a mag carrier built in with the holster. I chose the standard style without the extra mag carrier. Osborn sent it to me for review and it arrived quite quickly. 

   I have been wearing the TacticalTuck since it arrived about 2 1/2 months ago. The holster is dyed a redish brown color. Osborn holsters informed me that dyed holsters resist sweat better, but I notice now they offer a moisture barrier for an extra few bucks. It can also be had in natural or black leather. 

  The TacticalTuck has been one of the most comfortable holsters I have worn. It uses a very flexible leather backing with a kydex outer shell.  This has its pros and cons. On the positive, it is super comfortable. On the negative, it is hard to reholster because it pushes in toward the kydex, somewhat collapsing the pocket that the firearm goes in. As long as you pay attention and reholster slowly, it works out fine. The outer shell is molded for your firearm. And they have lots of models to choose from. Osborn does a nice job on the shell. My firearm fits good, there are no sharp corners and the molding around the gun is done nicely. The shell is also adjustable for tension with 4 screws that press on rubber washers. All the hardware screws use a smooth, chicago style, backing nut. 

   Osborn supplies their holsters with metal belt clips. These clips are some of the sturdiest clips I have used. The TacticalTuck has 2 belt clips to give a sturdy attachment of the holster. The clips have bumps on them that help them stay on around the belt. I had zero problems with the loops coming off. In fact, they clip on so well that it actually takes some effort to get them off of the belt. I like these clips, but every metal clipped holster I have used, causes my shirts to wear out. Especially around the rearward clip, when sitting in chairs alot, the clip rubs through the shirt.  

  Being that this is a hybrid style holster, it offers plenty of adjustments. Each belt loop has 4 adjusting holes. So by moving them up or down individually one can adjust ride height and/or cant of the holster. Each one of the holes has been riveted, so adjustment is easy and the holes should not wear out. Osborn also cuts the backing leather for the individual firearm. This is a nice touch, as other companies sometimes just use 3 or 4 different backings. 

  Osborn makes a nice holster. It has some good features and a few so-so ones. But if your in the market for a very comfortable hybrid holster. Give Osborn Holsters a look. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Hybrid style IWB holster

Target Market:

Concealed carriers

FNBs (Features & Benefits of this product):

  • Hybrid style (leather back, kydex shell) 
  • Firearm Model availability
  • Adjustable retention
  • Steel belt clips
  • Tuckable 
  • Adjustable ride height
  • Adjustable cant
  • Made In U.S.A.

What other aesthetic options or finishes are available?

Natural or Black

With mag carrier combo

What others are saying?:

 Good Holster

Mike @ Osbornholsters.com 4/5 stars

Overall it is a good holster. I like the adjustability of ride hight and the quality is great. My only complaint so far is the retention. I have tightened the screws as far as they will possibly go and the leather seams to relax the more I wear it loosing the retention. I have bottomed out the screws and not sure where to go from here.

 

Great Options for Rail-Mounted Lights

Z @ Osbornholsters.com 4/5 stars

Pros: * Overall solid build quality and features.* If you have a weapon-mounted light (and you should), there are more options available on this holster than with most other vendors.Cons: * Had to cut off some leather to allow my middle finger to get under the trigger guard on the draw. * Then had to trim a bit of kydex to allow my middle finger to index under the trigger guard on the draw without scraping it on kydex every time.

Getting a consistent and proper grip is paramount. The strong hand should ride high and tight into the backstrap/beavertail, and the middle finger should ride high and tight into the trigger guard. Google "maximizing the combat handgun grip" for more info. Just trim the leather and kydex a bit to allow this the moment you grip the pistol and you have a product that can't really improve much further.

Link to other reviews:

Four Guys Guns

Concealed Nation

Price point:

MSRP = $49.99

I need it now! Availability:

Osborn Holsters

Our Rating:

Pros:

  • Comfortable
  • Adjustable retention
  • Adjustable cant
  • Adjustable ride height
  • Quality molding
  • Tuckable

Cons:

  • Collapsible holster mouth 
  • Metal clips

Score: 7.5 Good

 

Chad's Favorite Link: The 22 Connection

 

, , , , ,

Crew Holsters "OL' Classic OWB" Holster

, , , , ,

Crewowb1

The Crew Custom Holsters OL' Classic OWB is your standard outside the waistband holster.  It is manufactured from some nice heavyweight kydex or similar plastic.  The one I received is for a full size 1911 style pistol.  It arrived in black.  I tried it with 2 different 1911's and it functioned flawlessly.

Crewowb2The design of the holster would make it very useful for everyday carry, IDPA, hunting, or any other thing you might want an outside the waistband holster for.  The belt loops supplied fit my 1.5" belt nicely.  The loops are also kydex, and are very deep, meaning that a really thick belt, or one of the double competition style belts, will fit through the loops.  The loops can also be adjusted up or down on each side.  This way, the holster can be lowered, raised, or adjusted for cant.  Being that it is for a 1911, the inside sheet of kydex came up just to the safety lever.  The outside piece is a little lower to help you get a good grip when drawing.  This model OWB holster also covers the trigger guard completely.  It is also molded around the mag release button so that it can't be hit accidentally.  Some of the owb models have adjustable retention, this one does not.  I didn't find this to be a problem, as the holster retained the firearm nicely.  The draw stroke is also very smooth. Upon reholstering, you do get a good "snap" as the holster locks the gun in place.  I did notice that it took a few draw strokes to break in the holster, as it was very snug when I first received it.

This holster is really nice.  It is available in lots of colors and patterns, for a few extra bucks.  There are also options for weapon mounted lights and lasers.  Various belt clip options are also available, as well as a sweat guard, if one wishes.  The only flaw I found with this particular model was that, with one of my 1911's, the safety would just touch the holster so that the firearm would not go in completely.  I mean by maybe an 1/8".  So I just filed that spot down slightly and it worked great.  I called The Crew Holsters about this and they said I could send it in for them to fix, because it does have a lifetime warranty.  They said they would look at the problem and I doubt that it exists anymore.  If you're in the market for a good kydex style holster, give the Crew a call.

Crewowb3

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Outside the Waistband holster

Target Market: IDPA, concealed carriers, hunters

FNBs (Features & Benefits of this product):

  • Adjustable belt loops
  • Available Options
  • Full trigger coverage
  • Good retention

What other aesthetic options or finishes are available? Lots of different colors, patterns and options.

What others are saying?: 

  • THE STUTTERIN GUNNER from YouTube
    "I've ordered a few of their iwb holsters and i think i found the last holster company I'm going to deal with, the owner is cool and prices are damn good, and the product is good, speaking of which i need to order a iwb for my sig."

Price point: 

MSRP = $45.00 for black, everything else extra

Retail = $45.00+

I need it now! Availability: The Crew Custom Holsters 

Our Rating: 

Pros:

  • Good Retention
  • Adjustable Belt loops (height and cant)
  • Firearm availability
  • Color and pattern options
  • Light and Laser options
  • Belt loop options
  • Adjustable retention on some models
  • Completely covers trigger

Cons:

  • Safety on 1911 hit edge of holster slightly

Score: 8.5+  Grea85t

 

 

Chad's Links:

Handgun Radio

Man O' Steel charity fund raiser multi gun challenge

Firing Line Review

 

 

,

Alien Gear Cloak Tuck 3.0 IWB Holster

,
Alien Gear Cloak Tuck 3.0 Holster

Following up on my past review of the Alien Gear Cloak Tuck 2.0 Holster, I requested the newest evolution to the extraterrestrial themed holster line, the Cloak Tuck 3.0 Holster. I gave the Cloak Tuck 2.0 IWB holster a rating of 6.5 out of 10, as it was a uniquely comfortable holster, but had some odd flaws that should probably have been thought out better. The cons I found with the 2.0 holster was the generous flexibility of the backing would cause the slide to come out of battery when reholstering at a wrong angle, instead of guiding it into position like a more rigid leather backing. The neoprene material was soft and comfortable, but the smooth front surface lacked enough friction to really hold the gun snuggly. Another big complaint was the exposed hardware on the back that would contact the skin and cause slight discomfort. The cant adjustment hardware also was exposed on the front and would wear the fabric of your pants. No bueno! But it was apparent Alien Gear was onto something, as many users still raved the 2.0 holster.

Alien Gear Cloak Tuck 3.0 Holster

The quest for engineering a superbly comfortable, yet functionally supportive IWB holster is a tough egg to crack. Many IWB carriers are simply content with their leather backed holster, and pretend its comfortable when in reality it feels pretty noticeable on the hip or has a bulky profile that prints through the pants or shirt. Alien Gear's cloak tuck line has gone through a several design and engineering phases, from a high quality leather backing in the first version, to the cloak tuck 2.0 and it's neoprene covered ABS polymer core. In this third creation, Alien Gear has found much more than a compromise.

Alien Gear Cloak Tuck 3.0 Holster

Alien Gear Cloak Tuck 3.0 Holster

The Cloak Tuck 3.0 doesn't compromise in comfort at all. In fact, its even more comfortable than the 2.0, which many users raved about it's almost nonexistent presence on the belt. The neoprene backing is just a soft, and now it covers the unsightly hardware T screws. No more will body hair get snagged and pulled! To boot, there is now only one set of cant adjustment screws, that you can simply unscrew and reposition however you like using the supplied allen screw. I can't really think of a reason why there were two sets of unused and exposed screws on the 2.0 holster, but thankfully they're gone!

Alien Gear Cloak Tuck 3.0 Holster

The biggest improvement to the design is on the inside, beneath the neoprene fabric. Instead of an ABS core, there is now a stainless spring steel backbone dow that is only big enough to anchor the gun shell itself. The wings of the holster still remain very flexible, bendable to a full 180 degrees without tearing, breaking or stretching anything. So now not only does the handgun have a more rigid but flexible support backing, but the winged tabs are free to flex along your belt-line more freely. The backing carries the same combat cut as the previous models, and it has the same flexibility as the wings so no matter your body type or degree of muffin top, this holster wouldn't feel any more comfortable unless it was made of Charmin Ultra Soft.

 

Alien Gear Cloak Tuck 3.0 Holster

Another new addition to the Cloak Tuck 3.0 has a new skin. Specifically called "Alien Skin," the front surface of the holster now has a thermoelastic layered thats textured almost like a reptile. The new texture adds drag to the retention of the pistol, which was lacking in the 2.0's smooth surface. Also the Alien Skin has the logo and made in USA flag molded right into it, which looks much more professional than the silver paint on the last version.

Alien Gear Cloak Tuck 3.0 Holster

Nothing's changed as far as the clips and handgun shell, they are exactly the same as before... well expect now you can get a Viridian reactor model that activates the laser upon draw. As for the belt clips, you can choose from a number of clips including black steel clips, standard nylon clips, polymer injected "J" clips or "C" clips, black leather loops, tan leather loops, or as a combo of black leather loops and either "J" clips or "C" clips, or tan leather loops and either clips. The "J" clips come up over the pant and hook just underneath the belt, and the "C" Clips hook over the top and bottom edge of the belt. These two styles are supposed to be more discreet when you have your shirt tucked in, as any full size clip showing over the top of a belt when the shirt is tucked is really a dead giveaway. It's what I look for first if I'm playing the "spot who's carrying" game. The black or tan leather loops are intended to "blend" against your black or tan dress belt for more discretion as well.

Alien Gear Cloak Tuck 3.0 Holster

Alien Gear Cloak Tuck 3.0 Holster

My review score for the Cloak Tuck 3.0 goes up to solid 9.0, with a high probability of it meeting a 9.5 rating after further testing to be sure the stitching and overall finesse holds up over time. Bottom line, this is the most comfortable inside the waistband holster on the market... regardless of price point. While there are comfortable options out there, you won't find one that beats the price of the Alien Gear Cloak Tuck 3.0 holster. Easily affordable, easily adjustable for cant and retention, and easily forgettable when wearing unless you bend or contort. I wish I could say they paid me for a glowing review, but the fact is this is just a damned good holster. The branding of Alien Gear is alittle oddball with the whole little green man and UFOs on the website, but its hard to dispute their claim that this is "the most comfortable holster on Earth," or at least until the Cloak Tuck 4.0 holster comes out.

Firearms Insider Reviews – 8 Key Points

Claim to Fame: The Cloak Tuck 3.0 concealed carry holster offers an unmatched level of comfort and concealability within the concealed carry world.

Target Market:  Concealed Carry

FNBs (Features & Benefits of this product):

  • Holster base can be used to upgrade Cloak Tuck 2.0 Holster
  • Improved retention
  • Enhanced flexibility
  • Stainless spring-steel band that acts as core
  • Layer of thermoelastic polymer w/ "Alien Skin" covers the face of the gun holster for grip
  • Previously exposed T-Nuts are now covered with soft neoprene fabric on the back
  • Completely waterproof design
  • Compatible with a variety of belt clips: nylon “C” clips and “J” clips
  • Great variety of gun models, even obscure guns other holster makers don't touch
  • Available for some guns with mounted Crimson Trace, Viridian or Laserlyte products
  • Hosts multiple shells, allowing user to swap out their guns while keeping the same holster base
  • Iron Clad Triple Guarantee: 30 day test drive, free shell trades for life, and Forever Warranty.

What other aesthetic options or finishes are available?: Black "Alien Skin" with Bright Green Bushings

What others are saying?: "Alien Gear Holsters: Is it Hype or Quality? I've seen the slick marketing and all the ads but figured it was a cheap design considering the price. 

  • Alien Gear Holsters produces Hybrid holster system high quality leather backing with
  • Variety of clips for customizing carry options for unbelievable comfortable all day long
  • Distributes weight across waist with no issues whatsoever
  • One of the cool things about the system is you get an accessory pack with clips, hardware and wrench - everything you need to customize, make it your own the way you like. 

I think theres a lot of cool things about these holster that will peak your interest. It has mine." sootch00 YouTube Video

Price point:

I need it now! Availability: Website

Our Rating:

Pros:

  • Extremely Comfortable, yet good support of the handgun
  • Carries well in different positions on the hip, angles handgun grip inward
  • New spring steel core increases retention by stiffening weapon area while still allow wings to flex
  • Thermoelastic skin and hidden T Screws are vast improvements to aesthetics over 2.0
  • Extra parts now come in a sweet little kit with different size screws and bushings and a alien head keychain (lulz)
  • Customer service is on point
  • Price beats out most other competitor IWB holsters
  • Great entry level option for new concealed carriers

Cons:

  • Position of the slide was still slightly off center from sweat guard
  • Limited options for popular weapon lights (no Streamlight, Surefire, Inforce)

Score: 9.0 Amazing

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design

Firing Line Review

 

 

, , , ,

Bravo Concealment RTT Holster Combo Pack

, , , ,

Bravo Concealment RTT Holster Combo

I remember listening to a podcast back when I first became a gun owner, and one of the hosts jokingly claimed that when you become a concealed carrier, you are almost guaranteed to have a drawer full of holsters at some point. Sure enough I can support that claim now that I have multiple handguns, each of them needing a holster for inside the waistband (IWB) or outside the waistband (OWB) carry. Add in a mounted weapon light, and thats another set of holsters. The good news is many other gun owners have the same problem, and kydex holster companies have attempted convertible holsters that can easily be swapped between OWB and IWB.
One such holster is the RTT Holster from Bravo Concealment. Available in a combo pack that includes both IWB and OWB belt clips for either training or competition use, or carrying concealed inside the waistband. The combo pack also includes kydex magazine holsters, either as two single mag pouches or one double mag pouch.  The RTT holster is designed to fulfill most of the requirements for a defensive pistol class setting, all for one solid price.

Bravo Concealment RTT Holster Combo

The RTT Holster gets it's name from Range Time-Tactical Shooting, LLC. You maybe more familiar with their YouTube Channel of gear reviews and training promo vids. The RTT Holster Combo Pack is marketed as the gear package ideal for taking a RTT Defensive Pistol Class. Bravo Concealment offers the RTT holster separately as a lightbearing or plain standalone holster for $74.99 if you already have mag pouches you prefer to run in the classroom or competition, as well as the standalone magazine holsters as either double, or two single magazine pouches.
 In wearing the RTT holster and mag pouches around the farm for a week with my Smith & Wesson M&P357c w/ Streamlight TLR3, I really appreciate the robust construction and the hand-fitted care that when into the components. The inward curve of the belt loops on the holster and pouches fits the natural curve of the body as well as provides good friction against the belt, so your rig wont be sliding around your waistline all day.

Bravo Concealment RTT Holster Combo

The advantage to selecting two single mag pouches is the flexibility on the belt, you can either place both side by side on the support hand side, just one, or mix it up to fit your training scenario. There is an option to have the bottom edge of the kydex pouch cut slanted to allow for better mobility during pronating or crouching exercises. Another great feature Bravo Concealment puts into these mag pouches is a tensioning screw just to the right edge of the magazine that can be tightened or loosened with a screwdriver. Most holster makers will tell you to heat up the kydex to be pliable enough for manually reforming, but its nice to see this maintenance step simplified into the engineering of the mag pouches. Logically they will be used more frequently that the main handgun holster during courses of fire (unless your only practicing your drawing mechanics) so its nice to able to adjust the tension on the fly.

Bravo Concealment RTT Holster Combo

The RTT holster itself is an all around good OWB holster. Strictly speaking, outside the waistband kydex holsters all sort of look the same. The key differences between them to me are the cut and the clips. By cut, I mean the top opening of the holster. There's a balance thats needed in order to protect the trigger guard yet expose the magazine release, as well as leaving adequate clearance for the gripping hand's fingers to get a full, firm purchase on the handgun's grip... especially under duress. Several draw-strokes under standing, sitting, and kneeling positions were all positive in my testing.
The clips, or belt loops in this case, are what I would consider and great choice for OWB carry and training scenarios. Instead of using actual clips that would allow the holster to be attached or removed without unfastening the belt, Bravo uses polymer injection molded belt loops. These require the belt to be threaded through the loops at the same time as your pant belt loops, unless you run an exterior tactical belt which of course is possible by selecting one of the 1.5" - 2" belt width options on the Bravo concealment website. These loops are really ideal for heavy duty drills and generally harder use than other style clips, as they will withstand more stress from drawing and reholstering forces. I've seen other OWB kydex holsters on the market with thinner belt loops cut from the same kydex sheet and I was never really impressed by their thinness and sharp edges. Also a note: Bravo offers pancake-style belt loops separately.

Bravo Concealment RTT Holster Combo

This brings me to the IWB capability of the RTT Holster, which for me did not go well. My real only issue with this holster as an IWB option is it was very uncomfortable for a shooter my size.  I carried it in the 4 o'clock position like I'm accustomed to carrying with other IWB holster types, and just feels like a huge hard object not conforming to my hip at all. For context. my build is north of 220lbs, and the holsters I usually wear for CCW are leather backed with a half kydex shell.  I've tried adjusting the RTT to an appendix carry position, and an almost 5-6 o'clock position to reduce the direct pressure on my hip with some relief, but still just not feasible for me unless 5.11 decides to make tactical sweatpants.

Bravo Concealment RTT Holster Combo

Now take note, if you have a slimmer body type, this holster should ride better on your hip. However with that said, I also found difficulty with the IWB soft clips themselves as they interfere with the drawing hand. Even with the clips mounted at their lowest position on the holster's grommets and adjusted for a 1.25" width belt, there wasn't enough clearance for my fingers when drawing the weapon, and I by no means have sausage fingers! My second grievance is they are tricky to loop under the belt and snap with one hand or without looking. I'm not sure why the button snaps themselves were so difficult either, but I wasn't able to figure out how to snap them correctly in one attempt. These are just not working for me, but it is worth noting that Bravo Concealment also sells polymer injection molded IWB belt clips that would be preferable in my opinion over these soft belt clips.

Bravo Concealment RTT Holster Combo

All in all, I would certainly recommend getting the RTT Holster Combo Pack if you wanted a starter's kit for training courses or competitive shooting events, especially if you wanted to retain a mounted weapon light on your gun using an outside the waistband holster. If your class / competition requirements include a IWB holster and you are confident this style of holster will fit inside your pants, I would say get the 1.5" or 1.75" IWB belt loops instead of the soft clips. The gear is solid, and the customer service at Bravo Concealment is on point. Now get your gear and hit the range!

Firearms Insider Reviews – 8 Key Points

Claim to Fame: The RTT Combo Pack provides everything needed to attend an Range Time Tactical Defensive Handgun Class. Whether you are a casual shooter or a serious RTT enthusiast, the RTT Combo Pack will help you purchase everything you need at a discounted price.

Target Market:  CCW carriers (OWB or IWB), Handgun Training Classes, 3-Gun competitors

FNBs (Features & Benefits of this product):

  • Kydex RTT Holster available with or without pistol light.
  • 2 Single Mag Pouch *OR* 1 Double Mag Pouch
  • IWB Soft Belt Loops/ IWB Belt Clips
  • Designed for outside the waistband carry, but can easily be converted to inside the waistband by switching out the belt loops.
  • Thinner profile and 0° cant allowing the ability to add more gear to your belt.
  • Hand molded holster for solid retention of weapon.
  • Robust 1.5” or 1.75” injection molded belt loops.
  • Adequate room for a positive grip thus enabling a smooth draw with solid weapon retention.
  • Belt loops are adjustable to create a desired cant for greater concealment.
  • All edges on holster are rounded for comfort.
  • Kydex .08 thick
  • Bravo Velcro Patch

What other aesthetic options or finishes are available?: Black, OD Green, Flat Dark Earth, Coyote Brown.

What others are saying?: "I bought the RTT holster to support the Indiana company it was named after. I carry the G19 and love the holster. High quality, thick kydex. I bought the holster along with a single mag holder. Perfect retention, plus I love the fact that there is a cutout for the index finger so I can get a FULL grip before drawing. I did have to wait 3 months to get it, but it was worth it for me. I don't buy a lot of gear, but what I do have I like to spend the extra time and money to get the best I can afford. I feel like I made a good decision. I would not hesitate to purchase again from them." DefensiveCarry.com Forum User

"I recently picked up the ‘RTT Holster’ from Bravo Concealment and wanted to share my thoughts on the holster. Let’s start with customer service. The fit and finish on Bravo holsters are stellar. I was very impressed with the quality and attention to detail that was evident in the holster I received. My holster was free of sharp edges and rough spots throughout. Not to be disappointed, function follows fit and finish with everything Bravo makes. My holster was for a Glock 17 and the retention was excellent. My Glock clicked into the holster and stayed in place until I wanted it out. The ‘RTT Holster’ is designed primarily as an OWB holster and that’s how I use it. Given the way the holster curves around the body and the way the belt loops pull the holster close in, the holster conceals quite well. Options are available for IWB use if you’re interested. I’ve run the Bravo Concealment ‘RTT Holster’ through two handgun classes and use it for concealed carry on a daily basis and I couldn’t be happier with how it performs. Having purchased my holster for the Glock 17, I actually got a bonus feature in the since that the holster also works very well with the Glock 19 & 26." Shanes Gear Thread

Price point:

  • Retail: $142.99 -10% using coupon code RTTCOMBO10

I need it now! Availability: Brave Concealment Website

Our Rating:

Pros:

  • Convertible from OWB to IWB using supplied clips
  • RTT Holster is well made with solid retention
  • Hardware are common screw heads instead of hex or torx
  • Mag pouches available as two singles or one double pouch
  • Slant cut on mag pouches for better mobility / shooting positions
  • Mag pouches have tension screw for user adjustability
  • Holster and mag pouches are adjustable for cant
  • Injection molded belt loops are tough and rugged
  • If your pistol has an RMR or other micro red dot, Bravo will cut a recess for clearance

Cons:

  • Concealed IWB carry is not as comfortable as other IWB only holsters
  • Soft belt clips hinder clearance for drawing hand
  • Price still higher than separate components on the market

 

Score: 7.5 Good

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design

Firing Line Review

 

 

 

SEARCH