RPS Tactical Adaptive Holster Review

Everyone has been there; the drawer or tupperware container full of holsters. You’ve tried numerous ones, and there is always some sort of issue with them. The holster is too bulky; the holster doesn’t have any flex to work with your body shape; it only allows for one method of carry or storage. RPS Tactical has addressed these issues. Located in Fairfield, Maine, RPS Tactical was started by a local LEO and his brother, with a focus on making holsters, belts & nylon gear along with many other custom items. I spent some time with Rob and his brother Nick and discussed the way they make their holsters, as well as the way they hand stitch their belts. Their attention to detail and commitment to quality is very apparent in the way they make their items and the final product they put out. They are also willing to work with the customer. When I wanted to get a holster made by them, they didn’t have the mold for my Steyr C9A1 (most people don’t) and they were willing to let me bring my firearm over for them to mold the holster. I know another individual who had a specific need and they worked with him to get the holster and belt exactly as he wanted it. With the owner of RPS Tactical being a law enforcement officer, they have a really good understanding of what goes into comfortable everyday carry of firearms and other gear.

I did a podcast with the guys at RPS and they made me the Adaptive Holster for my Steyr for me to evaluate. I spent almost 8 months carrying my Steyr with the Adaptive holster in the IWB and then the OWB configurations. I had long road trips in the car, range trips, working outside, going on walks with my wife and son & pretty much every single other everyday thing you do. The Adaptive holster is a kydex shell with a sturdy leather  backing. On the body side of the backing material is the soft side of industrial strength velcro. This allows for various mounting options if you purchase the corresponding velcro patches that can be affixed to any surface. For my body type, I found the OWB configuration worked better for me. I carried setup as IWB from June to about November, when I switched to the OWB configuration as the weather got colder and I could start wearing jackets. The IWB worked good, but with my body type I’ve found that IWB can be uncomfortable over extended periods of time. I am confident other people that don’t have issues with IWB carry will find the RPS Tactical Adaptive holster very comfortable.

During my time wearing the holster (and I am still wearing it to this day) i noticed no abnormal wear or any hardware backing out or failing on it. Everything was very sturdy, reholstering was very easily accomplished, and the trigger guard was suitably covered. The kydex is molded to your specific firearm, and the retention was fantastic.  As with most high quality holsters, the leather backing was cut to allow for a full grip on the firearm prior to drawing.

One thing I will also note is the soft side velcro backing. While it is there for the mounting options as we discussed before, it also makes for very comfortable carry if the holster is directly against your skin. I, like many people, do not enjoy having a tucked in shirt. I have used other holsters that have the large leather backing and oftentimes found that when they were against bare skin that there was a lot of perspiration and discomfort especially in the hot summer months. It seems like the soft velcro backing on the body side of the holster allows some air to get in between the backing and your skin, preventing any perspiration or discomfort from occurring. For those of you who like to wear a tucked in shirt, the IWB configuration is tuckable as well. There are other carry options for the adaptive holster as well, including a paddle mount or  purchasing the RPS Tactical Shoulder harness and using your existing holster as a shoulder holster.

If you are looking for a very high quality holster (or any other pieces of high quality gear) from a fantastic small business, look no further than RPS Tactical. Their commitment to their products long after it has left their shop is telling. I have had multiple people come back to me after I have steered them toward RPS Tactical for their holster needs and tell me that they were so happy to work with RPS. Rob and Nick were very attentive to their needs and oftentimes they ended up getting fitted out with belts and other items above and beyond what their original request was. That speaks volumes as to the character and dedication that the guys at RPS have to customer satisfaction. I was very happy to evaluate their holster, and would highly recommend their products to my friends and family, for both duty & EDC use.  

FIREARMS INSIDER REVIEWS - 8 KEY POINTS

CLAIM TO FAME:

Adaptive Holster System (Various Mounting Options)

TARGET MARKET:

Those wanting a high quality holster for everyday carry that can be utilized in a variety of ways.

FNBS (FEATURES & BENEFITS OF THIS PRODUCT):

• Convertible between IWB & OWB

• Tuckable during IWB carry

• Soft side velcro backing against the body

• Sturdy leather backing with cut to allow full grip of firearm before drawing.

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE?

Various color options/finishes including Kryptek, Carbon Fiber, Coyote Tan & more

LINK TO OTHER REVIEWS:

Tactical Toolbox Review

PRICE POINT:

$65.00 (various options may be extra)

I NEED IT NOW! AVAILABILITY:

RPS Tactical LLC

OUR RATING:

Volquartsen Custom Scorpion .22 LR Pistol Review

Review Picture 4

Written by: Ryan Michaud

The .22 rimfire pistol market is one of variety. From inexpensive plinkers to tricked out, high performance raceguns, I don’t know of a market that offers the discerning consumer more choices in terms of fit, finish & quality. In contrast to a few years ago, .22 rimfire ammunition has started to make a comeback in areas where it was scarce for quite some time, and that has made taking these rimfire pistols back out to the range much more of a possibility. Gone are the days of 99 cent Winchester White boxes of 50 rounds like I remember, but .22 LR still offers good performance and practice options at a far reduced price compared to full size centerfire ammunition. As mentioned before, there are many different tiers of .22 LR pistols. The Volquartsen Custom Scorpion is definitely securely placed in the top-tier of .22 LR handguns; it is a lightweight .22 LR Pistol designed for high performance and is equally at home in the competition arena, or out in the field.

The Volquartsen Custom Scorpion can mount many optics such as this Burris Fastfire

Back in March I did an interview with Scott Volquartsen of Volquartsen Custom about their business. I came away impressed with their commitment to quality as well as to their employees & customers. Scott stated that Volquartsen had worked to make the finest rimfire handguns and rifles for competition and other uses that money could buy. We spoke about potentially having me test a handgun, and after NRA Show 2015, we spoke about what my desires would be if I was contacting Volquartsen to purchase a custom .22 LR handgun. I told Scott that if I were to call and order one, I would want a handgun that could fill a couple roles: competition & handgun hunting. I am a fan of hunting with handguns, and many .22 pistols simply aren’t precise enough for small game hunting. I have also thought about getting involved in rimfire competition, and would want a handgun that could fill dual roles. Scott suggested their Scorpion line, with a 4.5” barrel, the 1911 style VC Target frame, and Fiber optic front sight with the Volquartsen Target rear sight. The handgun would be fitted with all Volquartsen internals and would have an accessory rail on the top if I desired to mount any optics.

The Competition Bolt is coated in a variety of finishes for superior performance.

The Scorpion is a combination of the Lightweight VC Target Frame and the LLV Upper. It comes standard with the Volquartsen Competition Bolt. The Volquartsen Competition Bolt is CNC Machined and ground for superior tolerances, fit and finish. It features the SureStrike Firing Pin and the Exact Edge Extractor to ensure reliable feeding & function. The bolt is also offered with four different coatings, Diamond Like Carbon, Chromium Nitride, Titanium Nitride and Titanium Carbo-Nitride. The example I have here has the Diamond Like Carbon Coating. I can attest to the reliable functioning of the bolt and pistol, as I put a little over 3,000 rounds of various brands of .22 rimfire cartridges through the pistol in about a months time with not a single malfunction. This was with extremely minimal lubrication and almost no cleaning aside from wiping the bolt with a soft cloth.

The VC Target Frame and LLV Upper combine to make the Volquartsen Scorpion

The VC Target Frame is manufactured by Volquartsen, and is offered with a MKIII style grip angle or a 1911 style grip angle. The example I have is the 1911 style frame. It is CNC-machined from aluminum alloy and with a 6oz base weight, is very light and handy. You can get the frame in a variety of finishes & colors, with the Black, red, blue and OD green frames being Type III hard anodized and the Silver frames being NiB coated. The VC frame is fitted with all Volquartsen internals, including the Accurizing Kit with Extended bolt release, CNC Machined Target Trigger, Wire EDM Cut Target Hammer and target sear. It also sports a CNC machined disconnector, extended safety and in the MKIII models, a spring-loaded magazine ejector for positive ejection of spent magazines. Volquartsen has eliminated the magazine disconnect from this frame as well. Their trigger is outstanding, with minimal take-up and an adjustable overtravel stop. The manual lists the trigger pull weight at 2.25 lbs and I found this to be true, with the average over 10 trigger pulls reading between 2.25 and 2.3 on my Lyman trigger pull gauge. I cannot say enough good things about the trigger on this pistol.

The Volquartsen Target Rear with Fiber Optic Front presents a fantastic sight picture

The LLV Barreled receiver/upper is hard anodized & CNC machined. The receiver and barrel shroud are precision machined as one piece from aluminum alloy. An integral picatinny rail is machined into the top of the receiver for easy mounting of any of the optical sights available on the market today. It is fitted with a precision stainless steel barrel that is machine-honed and lapped and is available in either 4.5” or 6” lengths. The standard configuration LLV comes with 1/2 x 28 muzzle threads with either a thread protector, or with their LLV compensator.

The LLV Compensator mates perfectly with the LLV upper and tames the mild .22 LR recoil to almost nothing.

  My example has the LLV Compensator which functions very well and tames the already mild recoil of the .22 Rimfire down to almost nothing. The pistol runs well with a suppressor too, as you can see in the video. You can also choose any number of sight options, such as Hi-Viz front and Tritium rear, Hi Viz Front and Target rear, or Volquartsen Target sights. You can also opt to not have sights installed and simply use electronic optics.

Grip options for the VC Target Frame include Volthane Target Grips or Laminated Wood Target grips for the MKIII style grip angle, and Aluminum Grips or the Hogue Monogrip for the 1911 Style Grip angle. My example sports the Hogue Monogrips. They were very comfortable and made the gun easy to handle, especially after many hundreds of rounds downrange in a single session. This whole package comes in at under 2 lbs.

Multiple brands & types of ammo were used in the evalutation

At the range, I found the Scorpion to be incredibly accurate and fast. From close-up shooting on multiple steel targets as fast as possible, to 45, 55 and even 60 yard shots on an 8” steel plate, the Volquartsen Scorpion delivered. I fired many different brands & loads through the Scorpion over the test period, and the pistol functioned flawlessly with every single one. I used CCI Mini-Mag .22 LR hollowpoint 36 grain, Winchester Super X .22 LR round nose 40 grain & Aguila .22 Pistol Match 40 grain LRN. Also mixed in there were some Winchester 40 grain Dynapoints during the suppressed fire. At about 25 yards, the CCI Mini Mags were the most accurate for me, with groups of 0.58” being common.

It seems my particular sample really likes the lighter weight 36 grain bullet of the Mini-Mag. The rest of the ammunition didn’t shoot as tight groups for me, but all were well under an inch from a rest at between 25-30 yards. I had the most fun doing rapid fire steel drills on multiple 8” steel plates from 15 yards. It is REALLY fun to run this pistol fast.

Groups like this one (minus those two flyers from a previous group; the sticky fell off) were commonplace with the Volquartsen Scorpion at 25 yards

The Volquartsen Custom Scorpion is really an outstanding .22 pistol. The combination of high quality features really make for a handgun that is a cut above the rest in the rimfire pistol world. When I spoke with the folks at Volquartsen, I said that I would want a pistol that would be equally at home out in the field hunting small game as it would be in the competition arena. This pistol really delivers. It is eminently customizable to fit your needs, and  you can tell the people at Volquartsen really care about the desires of the customer. Every question/request I had was answered in a timely manner and with a high degree of detail and explanation. With a price range between $1,175 and $1,236 depending upon chosen options, it is definitely in the higher range of .22 pistols, but you are getting a high quality, high performance handgun that will definitely last you a lifetime.

Firearms Insider Reviews – 8 Key Points

Claim to Fame: Super High Quality .22 LR Pistol intended for competition or target shooting use.

Target Market: Shooters who need a .22 LR pistol for competition or small game hunting.

FNBs (Features & Benefits of this product):

• High quality internals

• Light weight

• Superb Trigger & Sights

• Optics Mounting Options

• Fantastic Customer Service

• Support a family-run firearms business

What other aesthetic options or finishes are available?

• Black, Red, Blue & OD Green Type III Hard Anodized

• Silver is Nickel Boron (NiB)

• Target Grips

• Aluminum Grips

• Various Options for Compensators

• 1911 style or MK III Style Grip Frame

Price point:

MSRP = Between $1,175 and $1,236 depending upon chosen options. This is a custom pistol.

I need it now! Availability: You can purchase the Volquartsen Custom Scorpion directly from Volquartsen Custom.

Pros:

• Custom built to the user specifications

• Uses high quality components for the internals

• Trigger is AMAZING.

• Coated Competition Bolt almost eliminates the need for lubrication.

• Reliability over 3,000 rounds with almost no cleaning whatsoever is amazing in a .22 rimfire pistol.

• Accuracy is top-notch even at long distance.

• Worked fantastic with a .22 LR suppressor. Very very quiet and accurate. Also, the sights can be used with the suppressor attached.

Cons:

• It is definitely in the upper end price range for .22 LR pistols. However, this isn’t really a “con” as it IS a high quality custom .22 LR pistol intended for the highest levels of rimfire competition.

95

Our Rating: 9.5 AMAZING!

Visit Volquartsen Custom for more information and to place an order!

Visit Ryan Michad over at Handgun Radio and the Handgun Radio Facebook Page

Sticky Holster

I’ll start off this product review by admitting that I am someone who is very hard to please when it comes to holsters. I think that may be a majority of the people who carry as well, but I am especially difficult in this regard. I absolutely hate tucking in shirts, and nothing is more annoying to me than having my firearm rubbing into my side all day. Because of this, I have been mostly relegated to pocket carry for the majority of my life. A good pocket holster should break up the outline of the firearm, as well as create a margin of safety by covering the trigger guard. An IWB holster should do the same thing. With most pocket holsters, retention of the holster on the draw is accomplished by having either a small hook-like appendage on the holster to snag on the pocket during the draw, or a sticky substance on the outside that tends to snag on the pocket material during the draw. Most IWB holsters accomplish this retention by using some sort of a belt clip, either plastic or metal (or button loops on some designs) that retain the holster in the pants during the draw stroke. The Sticky Holster uses the tacky outer surface material do accomplish this. However, the idea behind the Sticky holster goes much further than just pocket carry.

The Sticky Holster is designed to be quite versatile. The models that are designed for smaller framed guns, like my J-Frame, can be used one of two ways; either as a traditional pocket holster in a pants pocket, or as an IWB holster, wherever the user would prefer the firearm. Some guns are more suited to IWB carry than others, and some guns are more suited to pocket carry than others. It all comes down to personal preference. That would be one place where I would say the Sticky Holster shines. Rather than the user needing to purchase two separate holsters for two different modes of carry, the Sticky Holster can function either way. If you get up one day and decide that the pants you’re wearing have big enough pockets for pocket carry, you can put your firearm in the Sticky and put it in your pocket. If you decide that the pants you have on don’t really support pocket carry, you can tuck the whole firearm and holster unit into your waistband between your side and your belt and carry it IWB. The clipless design allows for the user to put the holster and firearm wherever on their beltline they would prefer, and this could be a significant advantage, as some pants have belt loops that tend to always be in the EXACT location where you want to put the firearm. Not having to contend with the exposed clip allows for many more location options.

For my test & evaluation purposes, I was provided with the MD-5 size holster from Sticky. It is designed to hold snubby revolvers with a barrel length up to 2.125”. It fit the revolver well, and the quality of construction and materials were quite nice. I must admit, this is my first experience with a holster of this style, and many of the things I experienced when using the Sticky holster could be chalked up to my inexperience with the system. When pocket carrying the Sticky holster, the retention was good during the draw, and the holster covering the hammer helped to prevent any snags during the draw. One of the negatives I found when pocket carrying with my J-frame was that there seemed to be quite a lot of extra material toward the bottom edge of the holster. This was causing the holster and gun to be pushed up and somewhat out of my pocket slightly when I sat down in the car. Perhaps this could be an issue with the pants I wear (Carhartt’s) but could also be an issue with a little too much material on the holster. It's not a deal breaker for the product, but something to be aware of for those folks who are buying the Sticky as a main pocket carry holster.

Carrying IWB with the Sticky holster is pretty easy, but it does take some getting used to for those people who are accustomed to having a clipped IWB design. The Sticky uses the compression of your belt against your side in conjunction with the tacky material to afford retention of the holster and firearm. I tried this with several different types of pants and gym shorts and found myself to be most comfortable with the Sticky while using normal pants and a belt for retention. There were a few times that after fast running or jumping that the Sticky had moved from where I had originally placed it. I had a similar issue with it while sitting down in the car. This could be a function of my body type and the type of seats I have in my vehicle, but it is something for the prospective buyer to be aware of. There is versatility in this holster, but it may not work for everyone, depending upon your lifestyle and comfort level. I have heard people talk about using the Sticky as a holster for when they are wearing pants or shorts that are not meant to be worn with a belt, and that use a simple drawstring for compression around the waist. I tried this several times, but the Sticky holster just did not feel secure enough for me in the waistband for me to trust this method of carry with that style of pant. Granted, I am carrying a very NON-lightweight J-frame (Stainless Model 60) so that method of carry may work better for people carrying a lighter weight weapon, but for me it just didn’t work out as well.

In closing, the Sticky holster is a good product that does help out in the holster decision process. It offers a versatility you sometimes won’t find with other holsters, and does so at a competitive price. I see that Sticky is planning on offering a reinforced model soon (Spring 2015) and that should alleviate some of my concerns with the thickness of the material. The instructions provided with the Sticky are clear and conscise, and explain the process for safe use of the holster, as well as the cleaning process (Which is very easy!). If you are someone who needs a versatile holster, and just can’t seem to find one which fits your needs, check out the Sticky Holster. It did not work well for me as an IWB holster, and worked best as a pocket style holster, but it may fill the IWB & Pocket Holster needs for you!

Firearms Insider Reviews - 8 Key Points

Claim to Fame: This product is a holster that is designed for use either in the pocket or inside the waistband. It is a clipless design that uses compression from the pants/belt and a tacky outer material to retain the holster and firearm.

Target Market: Concealed carriers, especially those people who do not care for the clipped design of most IWB holsters or those people who frequently have to remove their holstered firearm, for reasons such as entering areas where carry is prohibited. The clipless design of the holster makes it easy to remove the firearm and holster as one unit for safe storage in a legal location.

FNBs (Features & Benefits of this product):

• Clipless Design allows for versatility in terms of holster location.
• The holster allows for the user to choose pocket carry or IWB carry (Within certain limitations, mainly gun size.)
• Easily cleaned if the holster becomes soiled.
• Lightweight and not a lot of bulk.
• Covered the hammer of my revolver completely rather than allowing it to stick out above the mouth of the holster. This can be an important consideration for comfortable carry.

What other aesthetic options or finishes are available?: The holster is offered in a simple, black finish that has a stitched outer border and a tacky rubber like substance that I can most closely approximate to the material that is put on the handles of exercise equipment.

What others are saying?: “This was purchased for my SP101, and is my third Sticky Holster. I prefer the versatility these holsters give over a standard IWB holster; much thinner than leather, no clips or straps to get in the way, and it stays put.” - Amazon Review

Price point:

• MSRP = $24.95
• Retail = From Amazon $24.95

I need it now! Availability (Where can I buy this TODAY?) Amazon.com or Sticky Holsters

Our Rating:

Pros:

• Lightweight
• Sticky material allows for placement in different places on the belt.
• Clipless design removes the problem of belt loops getting in the way of the clip.
• Versatility; the holster can be used as a pocket or IWB carry option.

Cons:

• Holster can be somewhat bulky depending upon application. Pocket carry was pushing the limits of my pocket capacity (others may vary)
• The material is quite thin. It seems plenty durable, but I would prefer a bit thicker, with perhaps a reinforced holster mouth (Says on the Sticky website this is coming soon)

Score: 7.5 Good

Ryan’s Links:

Handgun Radio

Bore-Tips & Gun-Tips Cleaning Swabs Review

By Ryan Michad 

Let’s start off with one pretty well-known fact: most people absolutely HATE cleaning their guns. I’m one of them. I hate having to clean up the mess of spilled cleaning solvents/oils, torn patches, stuff stuck in the bore from said patches, etc. It tends to be a very messy, smelly job but is necessary to ensure the long-life and good function of your firearm. Solving one part of the problem, the company Swab-Its offers two products; Bore-Tips and Gun-Tips.

Bore-tips are a package of small Q-tip like implements, except with the cleaner part made out of a sort of light spongy material, rather than the cotton like on a Q-tip, which can pull off and remain stuck in the barrel. The spongy material readily absorbs cleaning solvents, and offers 360-degree coverage during it’s travel down the barrel. Bore-Tips are offered in all your major cleaning jag sizes, from .22  to .45, and 12, 20 and 410 gauge shotgun sizes. They have a pre-threaded portion that allows you to screw the cleaning swab right on to your favorite 8-32 gun cleaning rod.

The Gun-Tips use the same foam material but are like long q-tip swabs. These come with 3” swabs, 5” swabs and 6” swabs in a 9 piece kit. These are great for applying lubricants and other things in areas that may be difficult to reach with larger gun cleaning patches or brushes. Since the Gun-Tips are made out of the same foam material as the Bore-Tips, they do not tear or shred anything in the bore, and are easily reusable and cleaned. The different size brushes mean you have many options at your disposal for different sized guns.

I used both the Bore-tips and the Gun-Tips swabs to clean several firearms, including a S&W Model 66, a Ruger LCP and a Pietta 1851 Navy blackpowder reproduction. My initial concern when using these tips was that the cleaning solvents would really affect the foam material. We have all seen how some common cleaning products can melt certain types of plastic and other things, and that was my initial thought. The people at Swab-Its seem to have certainly done their homework, and the tips have not shown any sign of degradation, 1 and ½ weeks after the cleaning session. I used Remington Nitro Solvent along with some Rem-Oil for lubrication.

My other concern was the ability to clean the swabs and reuse them. Some products claim that you can do that, but oftentimes there is quite a bit of difficulty cleaning them up. Using some light dish detergent and some hot water, I was able to hand wash the swabs and get them back ALMOST to the original color when I opened the package. Swab-its does recommend using a little bit of mineral spirits to help clean the swab, but I did not use any when I cleaned them. Using a bit of the mineral spirits would probably help bring the swab to its original color.

While cleaning the guns, I did not baby the swabs, as I wanted to see just how tough they actually were. Cleaning a revolver cylinder can result in torn patches and lint all through the gun if you’re not careful. This was not the case with the Bore-Tips and Gun-Tips. I used the Bore-Tips to clean the chambers with ease and the Gun Tips to clean the face of the cylinder and the rear near & under the ejector star. The area under the ejector star is usually the place that causes problems for traditional cleaning patches; not so with the Gun-Tips. They did not hang up on any of the very sharp edges and made cleaning under the ejector star much easier with their compact design.

Using the Gun-Tips to lubricate the smaller parts of the LCP was also very convenient. Using larger swabs on a small gun can be tedious, with lubricants going into unintended areas. Using the Gun-Tips, I was able to apply a bit of Rem-Oil to the foam (which absorbed the oil and held it in place until applied) and used it to lubricate the inside of the slide and the rails. Using the tip helps to prevent over-lubrication simply because you have a finite amount of oil in the tip, and allows you to ensure those small areas are properly coated.

The only problem I had throughout the cleaning process was when I stepped up to clean the 1851 Pietta Navy. The Pietta had quite a bit of blackpowder residue in the bore, and some of it proved to be rather hard and difficult to remove. The Bore-Tips and Gun-Tips aren’t designed to be heavy duty scrubbers, and that task is better left to a brass hard bristled brush and allowing the solvent to properly work before attempting to clean it. The Bore-Tips are much better suited to use as a replacement for the patch/jag you would use normally to ensure your bore gets a good coat of solvent and then a good coat of lubricating oil.

Overall, I was very impressed with the Bore-Tips and Gun-Tips. With most of the packs being under $10, the simple fact that they are reusable doubles the value of the product. With traditional patches, you get them dirty and you throw them away. With the Bore Tips and Gun Tips, you get several repeated uses. The swabs are very convenient and would be a great addition to any firearms enthusiasts cleaning kit.

Key Points:

-The Swabs are made out of an absorbent foam that doesn't degrade when exposed to most solvents, and holds solvents and oils securely to ensure proper coverage.

-The foam tips do not tear and leave behind debris in the barrel of your firearm. Oftentimes with cotton patches or wrapped cotton tips, you end up leaving behind strands of cotton and other materials inside the bore. With the foam material of the Bore Tips and Gun Tips, these deposits are minimized.

-The Bore-Tips thread into your favorite gun rod, allowing for easy cleanup.

-They are competitively priced, especially being a washable and reusable product. They can be purchased for under $10 for a single, reusable pack at Bore-Tips

Score: 8.0 - Great