Werkz

Surefire X300 Turbo

By: Shan Hemphill

  Surefire is known for supplying quality, robust lights that are made in the USA, and supplies heavily to law enforcement agencies. Surefire products have a lifetime warranty, and there are many comments on the Internet about how Surefire has quickly resolved problems. Surefire is also known to be slow to release new lights, so their Turbo versions of the X300 and Scout have been heavily anticipated since their announcements at Shot Show 2022.

  I obtained 4 samples of the X300 Turbo, allowing me to gather data from multiple lights, then compare versus some of the best in the industry.

Specs:

Lumens: 650

Candela: 66,000

Runtime: 1.5 hours

Batteries 2x CR123A

Switches: Ambidextrous push (momentary) / toggle (constant)

Water Protection: IPX7

In the box:

  Inside the packaging is the light itself, 2 Surefire-branded 123A lithium batteries, instructions, and rail keys depending upon whether you’ve purchased the “A” or “B” version. The “A” version utilizes a spring rail key attachment system, and as a result, the box includes an extra spring rail and a tool to remove. The “B” version includes an extra rail key. Both also include a battery door pin to help keep the door from opening unexpectedly. 

  Fitup of either version is easy, but be aware that this is a large pistol light. It fits on the majority of pistols that utilize a full size rail, but it sticks out beyond the muzzle on most full size pistols. It even sticks out beyond the end of my compensated Glock G19x.

  The X300 Turbo is exactly the same size as the X300 Ultra. That’s important because there are a million holsters for the X300U;  you should be able to find concealment holsters for IWB or OWB, and if you’re on duty using a X300U already, you can keep your existing retention holster.

  Even though the package is long, I have been comfortably carrying the pictured package AIWB. Yes, that means I appendix carry one of the longest pistol and light packages on the market. I do so in the Werkz M6 holster, but I carry in the deep position with a little negative cant dialed in. I find this quite comfortable and easy to carry day in and day out. While it’s not G43x small, it’s workable.

  The light takes two CR123A batteries. While many people now prefer rechargeables for their lower cost and higher output capability, I do appreciate prime batteries for their long-lasting power output, and that I can easily swap batteries while training. 

  I tested all 4 of the X300T samples for lumen output in my integrating sphere, capturing both the absolute maximum, and calculating the ANSI / PLATO FL-1 lumens (which average readings from 30 to 120 seconds). Here are my results.

I also captured candela using similar measurements.

  All the lights performed well, but I did observe some variance between them. This is typical of lights; the electronic components (especially the LEDs) can vary from light to light giving different readings. 

  It is interesting how the light seems to get stronger for about the first 15 seconds, then it levels out and drops off.

The competition

  Given the high candela output of this light, probably the best light to compare to is the Modlite PL350 using either the OKW or the PLHv2 head. The PL350 is similarly priced, and the OKW head is rated at similar candela output at a rated 69,000cd. Here are my measurements:

  As we can see here, the new X300 Turbo has significantly more candela than the Ultra, and has competitive output compared to the PL350 with the OKW head. This is impressive output from CR123A batteries.

  I measured candela at angle, which provides a graphical view of the width of light intensity. If wider angles have higher candela output, then the light has more flood. If a light has a peak, then drops off near zero, then it has all throw and almost no flood.

    In this case, you can see that the PL350 with the PLHv2 head has a fair amount of output up to 5 degrees. In comparison, the X300U is much flatter, showing in graphical terms how it provides much more flood than the other lights.

  I also gathered lumen data, which allows me to measure instant max lumens, and calculate ANSI / PLATO FL-1 lumens, and runtime.

In this chart, we see that the highest lumen is from the Ultra, which is no surprise given that light’s focus on output and flood. There are two Turbo samples here because sample 1 seemed to have an issue with runtime that I didn’t see in the other 3, so I included sample 2 as an example of how the majority of the units tested out. It’s good to see that the Turbo can run 1:15 still outputting almost 400 lumens. 

Practical Testing

I stood downrange and had each of the lights shone into my eyes. Excepting the Ultra, all of these lights were painful to look at and I had a hard time determining distance or position of the person holding the lights. From the camera angle, you can see that all of these lights provide a degree of flood, and each light has a slightly different color tint.

Summary

Here is a summary of the data shown here:

Based upon the data gathered here, I personally am upgrading from my Streamlight TLR-1HL to the Surefire X300T. In particular, sample 3 impressed me not only with output but also with a slightly warmer color temperature out of the group. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Candela is competitive with the best pistol lights, backed by the Surefire reputation and fits in existing X300 holsters.

Target Market:

Military, law enforcement, and citizens who want some of the highest throw possible in a pistol light.

FNBs (Features & Benefits of this product):

  • Feature: 66,000 advertised candela

    • Benefit: Provides high throw capability – can illuminate further out than most pistol lights

    • Benefit: Defeats photonic barriers such as auto glass, headlights, and dark corners better

    • Benefit: Helps control subjects better by blinding themselves

  • Feature: Same form factor as the X300U

    • Benefit: Fits in all your existing X300 holsters

  • Feature: Retains X300 existing momentary and constant switches

    • Benefit: Operator can select between momentary activation and constant activation

  • Feature: Surefire build and reputation

    • Benefit: High quality made in the USA product with an excellent warranty

What other aesthetic options or finishes are available?

Comes in “A” and “B” flavors. The A version uses a sprung lever & key to lock in to the rail. The “B” version uses a key but has a screw to clamp to the rail. My personal preference is the “B” as I can clamp it down and eliminate rate. However, many people also have good success with the A version by using the correct key, or by putting some electrical tape on the top to reduce or eliminate the rattle.

Comes in black and tan.

What others are saying?:

T-Rex Arms:

Surefire was able to change the throw of this light without changing the external dimensions or size of the light itself, so you’ll be able to use with the holsters out there. They were able to squeeze this power out of CR123A batteries.

Big Tex Ordnance: 

“Still the standard, I regretted trading up to the 1000lm from the 500, this has the right spot and a nice flood, fits my existing setup and I might be losing it but the switches feel a lot easier to manipulate than the ones on the 1000.”

“Great light; amazing throw, intense hotspot, but still has a decent amount of flood. This is nearly as good outdoors as my Cloud Defensive Rein while being much smaller and still being the same size as my X300U. I don’t think you need to run out and replace all your old X300s and TLR-1s, but if you’ve got a handgun that needs a light, this should be a no-brainer.”

Link to other reviews:

https://youtu.be/Ra2j0mo_5zU

https://www.lowlightdefense.com/surefire-x300-turbo-the-king-reclaims-the-throne/ 

https://www.reddit.com/r/tacticalgear/comments/wjrnue/x300_turbo_is/ 

https://www.youtube.com/watch?v=9Ne1U85IEBA 

Price point:

MSRP = $379   

Primary arms = $322   

Big Tex Ordnance = $322

I need it now! Availability:

Seems out of stock everywhere. I think Primary Arms might be a good source.

Our Rating:

Pros:

  • Some of the highest candela in this segment. 30 seconds in, my 4 lights averaged 61k. Some people think candela is only for rifles, but it is also useful for defeating photonic barriers such as when shining a light through a car windshield and against the car’s headlights. Candela also helps blind a subject, making it difficult or impossible for them to see you.

  • Still has decent flood, similar to the Modlite OKW. Not as wide as the Ultra, but testing shows it sufficient for most indoor operations. Output is good, and for indoors it is possible to shine the light up (umbrella lighting) or down against the bottom of the wall (baseboard) to help diffuse the light.

  • Consistent output: our testing shows 96% output consistency from run to run. Some lights are much lower, down around 85%. 

  • Generous runtime of 1.5 hours

  • Utilizes existing X300 holsters, and literally everyone makes holsters for pistols with the X300.

  • Switches provide both momentary and constant activation, and do so intuitively.

  • Utilizes common CR123A batteries.

Cons:

  • This is an expensive light at just over $330 street price.

  • Switches are adequate and provide both momentary and constant activation, but they can feel stiff or sticky, and the momentary activation pokes my thumb  under recoil. 

  • Some people will see the high candela and lack of flood as a reason not to run the light. My experience is that high candela lights do restrict some of the peripheral view, but I know how disorienting a high candela light can be when it’s aimed directly at my face. I can overcome most of the concerns about “blinding myself” or “it’s too focused” through training.

  • It’s still a large light, one of the largest on the market. 

Score:

This is now my EDC light on my Glock 19x. 

I rate it at 8.50 - Great. 

Favorite Link: Geek out on all the data HERE

Werkz M2 holster for Polymer80

 Werkz holsters is a small kydex company located in Princeton Idaho. I first heard of them on the Handgun Radio podcast. Werkz makes of variety of formed holsters and accessories. From custom to off the shelf, they have you covered. Werkz sent me one of their M2 IWB holsters for a Polymer 80 PF940c and a M2 magazine carrier for this review.

 The M2 holster is a taco style design with some other features. A taco style holster is one that is made out of one piece of material, then folded over a mold, hence the taco name. A feature that I didn’t think I would use was the ability to convert it to an outside the waistband (OWB) holster. I found this actually quit useful when I realized that this was the only holster I had for my Polymer 80 and needed it OWB. I switched the clip to the other side. To do this, one just removes the two screws holding the clip on, and moves it to the other side. The M2 has clip locations at two heights and an angled location also. I ran the holster IWB with it angled or canted forward. This resulted in the main dislike of the holster. The clip doesn’t completely rest against the holster. It hangs about halfway off. When wearing it in this config, I felt as if it didn’t have as much surface area holding onto my belt and was also easier to take the holster off of the belt. When using the M2 in the straight upright position, this was not a factor.

 I must admit, this is one of the nicest finished holsters I have used. The edges are smooth, and I mean real smooth. It has some sort of texture on the outside. The Werkz logo is etched or laser engraved into the kydex. There are bosses where the clip is screwed on. It is open at the bottom so that a longer, or threaded barrel, will fit. The sight channel is really tall to clear suppressor height sights. It is even clearanced for a micro red dot sight.

 I’ve worn the M2 on and off since receiving it. It holds the pistol very nicely with good retention. One can adjust the retention somewhat by tightening or loosening the tension screws. The M2 does seem to print some under a T-shirt, or any thinner shirt. That is why I only wore it off and on. If I had a jacket on, no problem, but I usually just wear a T-shirt as a cover garment. I mainly wore it at the 2:30 to 3 o’clock position. Angling the pistol/holster combo forward didn’t seem to make it print any less. After about 3 days of wearing the M2, my body adjusted and it was comfortable, at least somewhat. I like how the M2 only has one wide clip, it makes it easier to locate exactly where it is the most comfortable. The M2 is a small holster, Werkz even calls it minimalist, and I’d have to agree.

 As I also mentioned, I wore the M2 as an OWB holster also. This is also when I mainly used the M2 mag carrier. I wore the M2 at a local Steel Challenge match. I was concerned using it with just the single clip. After 25 draws and reholsters, I am no longer concerned at all. It performed well as an OWB rig.

 Now a little about the M2 magazine carrier. The mag carrier is also a taco style and holds the magazine vertically. It is currently only offered for 9mm/40 Glock style magazines. As with the holster, the mag carrier clip is also reversible for IWB/OWB. I never reversed the clip, I just turned the magazine around and it worked fine. The M2 mag carrier is of the same high quality as the M2 holster.

 If you are looking for a good quality, and inexpensive holster, give Werkz a look. If the M2 is in stock, it is one of the “quick ship” holsters. So you can have it quickly also. They will also do custom holsters, if that’s what you’re looking for.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Minimalist Kydex Holster

Target Market:

Those needing a decent holster

FNBs (Features & Benefits of this product):

  • IWB - OWB convertible

  • Kydex

  • Adjustable clip height

  • 1.5” belt clip

  • Straight or canted

  • Adjustable retention

  • Useable with slide mounted optics

What other aesthetic options or finishes are available?

With or Without some rail mounted lights and colors

What others are saying?:

One holster to do it all. 5/5 stars on Amazon
By Dan S
Awesome holster. Ambidextrous carry options for every situation and adjustable retention. So far this is the only holster I could find that can AWIB and strong side OWB carry without replacing any parts, just moving some screws and bushings. Comfortable and has minimal printing. Also, you can't beat this price. Nearest comparable product from a reputable source is going to cost more for less features.

Link to other reviews:

None for this particular holster

Price point:

MSRP holster = $42.50

MSRP mag carrier = $30.00

Retail = $50.00 on Amazon

I need it now! Availability:

Werkz or Amazon

Our Rating:

Pros:

  • Great construction

  • Adjustable retention

  • Adjustable cant

  • Convertible between IWB and OWB

  • Price

Cons:

  • Holster prints

  • Clip

Score: 7.5 Good

75.jpg

 

Favorite Link:   Triggrcon




 

Werkz M2 w/TLR-1 Holster

Written by: Zane Mungillo

     Finding a good holster can be hard.  It’s such a personally dependent thing. There is a reason I have two large drawers full of them.  What is a great choice for me may be entirely wrong for you. It’s for that reason I approach holster reviews a little differently than other products. All holsters, in my opinion, should have the following qualities to even be considered for concealed carry:
•completely cover the trigger/guard
•allow for a full firing “master” grip on the gun while holstered
• have positive retention of some kind
•be made of either leather or kydex (not both) 
•allow for one handed reholstering. 
•firmly attach to the belt or pants
    
 Had the Werkz not “passed” these requirements, I would not have continued the review. 

     The Werkz holster took me on an emotional roller coaster if you will. A variation on their m2 iwb (customized for my gun and light) the holster, at first glance, appears to be very well crafted. All edges were buffed and perfectly smooth. It’s comes with a 1.5” injection molded clip that can be mounted at two different ride heights, straight draw or canted forward or backwards. It also has two tension screws for adjusting how much passive retention is on the gun/light combo. Retention is good when set to my preferred stiffness and a solid audible and tactile click is present when the gun is inserted, I knew I was going to love this holster. 

     That is, until I put it on, while extremely comfortable I couldn’t conceal the gun. The grip printed horribly in my typical dress, shorts and a t-shirt. Standing a boring 5’10” and weighing in at around 150 lbs I realize that I’m asking a lot of a holster to conceal a g17 in my extra medium t-shirts.  To give the holster a fair shake, I wore a slightly larger shirt a few days a week and carried around the house and at the range where I’m much less concerned with printing. 

     After about 2 months, when taking the gun and holster off I noticed the two tension screws had completely backed out and where nowhere to be found. The gun still had plenty of retention while in the waistband but this was concerning to me. To be fair I didn’t apply loctite after setting the desired retention so I chalk this up to that.  Since I used to make holsters in my shed, I have plenty of Chicago screws and such laying around so I replaced them and applied loctite this time (like I should have as soon as I got the holster).

     I decided to “modify” the holster at this point to make it more concealable so I superglued a pair of Dr. Scholls pads  to the inside portion and glue a furniture slide pad to the front inline with the belt clip. This both tilted the grip into my stomach but rotated the grip around. Werkz now offers a claw to accomplish the rotation of the grip and a quick google search of “the aiwb holster hack, Limatunes” will show you how to do the Dr. Scholls hack. I in no way removed material or heated the holster as to compromise the function of it. I simply added a wedge and a claw. 

     The holster now works fine with my typical dress and I’m very pleased with it.  I have over a thousand drawstrokes from it over the course of much dryfire and many range trips as well as about six months worth of  carry. I’m carrying it everyday for now until the next new hotness comes around that I have to try. 

FIREARMS INSIDER REVIEWS - 8 KEY POINTS

CLAIM TO FAME:  

Holsters made with little extra bulk and fast turnaround time, even on custom orders

TARGET MARKET:  

Concealed carriers 

FNBS (FEATURES & BENEFITS OF THIS PRODUCT):  

  • Meets my requirements for a good holster
  • Well made

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE?

Black, Blue, coyote brown, dark gray, FDE, olive drab, carbon fiber black, carbon fiber blood red, carbon fiber coyote, carbon fiber fde. 
Firearm and light options
1.5” or 1.75” clip 

What others are saying:  

Couldn’t find anything for this particular setup (g17w/trl-1) 
The only other reviews I found were on amazon and they tend to be hit or miss. 

Price point:  

MSRP - $42-80 depending model and options.

Retail - Same

I need it now availability: 

Werkz.com - Ships next day on in stock, 2-5 days for quick ship customs and 10 business days on completely custom orders.

Our Ratings:

Pros: 

  • Works as advertised
  • Holds gun securely


Cons: 

  • Not as concealable as other holsters I’ve tried 


Score: 7.50 Good

6.5 before modifying 8.5 after for an average or 7.5

75.jpg