candela

Powertac WOFT

  When it comes to handheld flashlights, there’s a ton of them around. The ultimate question is how do you know which one is right for you? I would go check out reviews and specifications. Which is probably why you are here. Powertac has been doing some pretty interesting things with handheld lights. I’ve reviewed a few of their lights in the past and they performed well. They sent out one of their new lights, the Powertac WOFT tactical EDC light. This light is a collaboration with WOFT (Where Our Families Train) training.

  The Powertac WOFT light is very compact. It has a length of 4.28 inches. A head diameter of 1 inch and a body diameter of 0.85 inches. This makes it fit in the pocket nicely. I usually just throw the WOFT light in my pocket. But for those wondering, it does have a pocket clip. The pocket clip is dual purpose, so it can be clipped onto stuff in either direction. So basically, button up, or button down, whatever suits your carry style. I did find it useful, if you needed to use the Powertac WOFT light as a headlamp. Just clip it to your hat brim and light up wherever your head is facing. The clip can be located around the flashlight body in 4 different locations. The Powertac WOFT is compact enough to make it easy to carry everyday.

  Function of the Powertac WOFT is pretty self explanatory. For instance, the button on the rear tailcap turns the light on and off. One press on, one press off. To momentarily turn the light on, just lightly push the button down. If you double tap the rear switch, you turn on the strobe mode. This works both in momentary and click options, depending on if you want the strobe to stay on or just use it for a wee bit. The tailcap button also has two ears sticking up to protect the button.These ears allow you to stand the light upright on a flat surface. I’m a big fan of a light that can stand up and be used to illuminate a whole room, similar to a lantern.

Front Target stands are 50 yds, Rear are 100 yds. Anything within 50 yds is easily identified

  The Powertac WOFT also has 5 brightness settings. These are: Firefly, Low, Medium, High, and Turbo. The Light ALWAYS turns on in the Turbo made. This is great for a tactical flashlight application, because if you need it, you want it on the highest setting. After the initial turn on, you can cycle through the lights settings by using the side button, which is located on the side of the flashlight's head. Since the WOFT light turns on in the Turbo mode, the first press of the side button takes you to the Firefly mode. Then each consecutive press takes you to the next level. I’m a big fan of tactical EDC lights that always turn on at the highest setting. Powertac hit this option spot on. I also really like the Firefly setting as a task light in dark settings.

  Now what everyone is waiting for, how bright is this Powertac light? It’s plenty bright at 1200 lumens for the Turbo mode. The Turbo mode also spews out a candela rating of 14,400. This gives a good combination of spot and flood. It’s plenty enough to disorient an aggressor. Powertac specs it out at a 240 meter beam distance, we all know that about half of that is useful distance. But that’s plenty for a small handheld light. The light runs off of a rechargeable 14500 cell. Extra are easily found on Amazon and other places. Powertac includes a magnetic usb charging cord that works great for onboard charging of the battery and light. For all you geeks out there (me included), here’s a list of those brightness modes and run times:

Lumens and Run Times:

Firefly - 0.41 lm for 3.4 days

Low - 19 lm for 9.69 hrs

Medium - 140 lm for 3.68 hrs

High - 600 lm for 47 mins

Turbo - 1,200 lm for 43 mins

Strobe - 1,200 lm for 1.18 hrs

  In the box are a few other items. The Powertac WOFT comes with 3 different bezels: a smooth one, a medium aggressive, and a pretty aggressive one. They just screw on, so they are easily swapped. Of course I used the most aggressive one. If I have to use it as an impact weapon, I want it to hurt. But the choice is yours. Also included is a wrist lanyard. I left it in the box, but it’s included if you have a need for it. The included extra bezels are a nice addition.

  The Powertac WOFT has become my EDC light. I carry it daily. Mainly because it has great light output for its size. I like that it’s not too large in diameter. Most other lights in this category seem to have a larger diameter, with a similar length and output. If I had one complaint, it would be run times, but I can’t expect that in such a small light. At first I had a little sticker shock on the price, but after using it for months, I get why it costs what it costs. 

  Powertac and WOFT did a great job putting this EDC light together. From its small size to its impressive output, it does what a pocket edc light should do. Always coming on in the turbo mode is what a tactical light should do, at least if it has more than one output. If you are looking for an edc pocket light, I’d recommend checking out the WOFT light at Powertac, as well as the other lights Powertac offers

Firearms Insider Reviews - Key Points

50, 100, 200 yd target stands

Claim to Fame:

Bright, small, rechargeable handheld light

Target Market:

Anyone needing a small, bright, handheld light

Features, Benefits, and Specifications of this product:

  • 1200 lumens max output

  • 14400 Candela max

  • 6 different settings that include 5 levels of brightness plus a strobe

  • 14500 Rechargeable Battery

  • Interchangeable smoothed, scalloped, & aggressive bezel

  • Magnetic USB Charging

  • Length: 4.28” (108.6mm)

  • Bezel Diameter: 1” (25.4mm)

  • Body Diameter: 0.85” (21.5mm)

  • Weight: 2.61oz (74g) without battery

  • Deep-carry bidirectional pocket clip

  • Reverse polarity protection protects from improper battery installation

  • O-ring sealed

  • Machined from aircraft grade aluminum with type III anodized finish

  • Tempered glass to resist breaking and scratching upon impact

  • Double coated glass lens to give maximum OTF (Out The Front) brightness and beam distance

  • IPX8 waterproof Submersible up to 2 meters under water

  • Lifetime Warranty

What other aesthetic options or finishes are available?

None

What others are saying?:

5 out 5 stars at Powertac.com

This flashlight is a BEAST

There are some fantastic features packed into this bad boy. I love how quick and easy it is to switch to strobe for home security or signaling, then back to Turbo. The WOFT lights up my whole street in Turbo mode. Nice build, well done Powertac!

Link to other reviews:

Tactical Tavern on YouTube   

Price point:

MSRP = $129.95

Retail = $110.45 with discount code “GGR”

I need it now! Availability:

Powertac

Our Rating:

Pros:

  • Small size

  • Bright beam

  • Good beam pattern

  • Always turns on at Turbo setting

  • Multi-Directional pocket clip

Cons:

  • Run Time

  • Price

Score:  8.00 Great

Favorite Link:  Powertac M5 G2 Review   

Z-Bolt Blazer LED & LEP lights

  When it comes to weapon mounted light, there are a ton of different aspects to choose from. Z-Bolt has a few options that are very interesting. Their lights lean high on the candela for maximum beam throw. Z-bolt also has options so that you can get a wider beam out of their lights. They sent both their LEP and LED lights to me for review.

  An explanation is probably due to the differences between the LEP and LED. Most of you have heard of, or used, a LED light. Not everyone has used, or seen, a LEP light. LEP stands for Laser Excited Phosphor. According to Z-Bolt: “The BLAZER employs a blue laser to fluoresce a yellow phosphor, forming a broad spectrum of white light.” Because of this, with an LEP light, you get a super focused white light beam. Think of a small spotlight, because when you shine it out into space, it looks just like a spotlight, there is zero spill over on this light. Now the LED light is just what you expect, a Light Emitting Diode type light. In the Z-Bolt LED light, you get a really good light throw, but still some spill to see things to your left and right. 

  As mentioned, Z-bolt sent two different lights, an LED and LEP. Both of the kits they sent are for weapon lights. These particular ones are for the “Scout” mounting platform. The LEP light kit that Z-bolt sent has a 18650 body, the LEP head, a clicker tail cap switch, 2-18650 batteries, a dual charger, 2 CR123 batteries, a “hot spot & fill” diffuser, and Red & Green predator filters. The LED kit from Z-Bolt is their Weapon and Handheld carry package. It includes a 18350 “scout” body, a handheld body, 2-18350 batteries, that same dual charger, a Thyrm switchback, clicker handheld tailcap, and a momentary only weaponlight tailcap. Z-Bolt makes different kits or stand-alone lights too, so whatever option you want, they probably have it. Z-Bolt also makes different tailcaps so that you can use a pressure switch, hot button, or one of those with a tailcap switch combo. The light heads, bodies, and tailcaps are interchangeable between all of their lights. So if I wanted to use the momentary only switch on the LEP weaponlight, I can. Another advantage to these kits is that the bodies, lightheads, and tailcaps are compatible with the Surefire M600DF/M640DF line of light parts, which is kind of the industry standard for thread pitches and allows the Z-Bolt parts to screw on.

  I won’t bore you with the specifications, as they are down in the “FNB” section, but I will tell you how each light performs:

LEP beam

  When you first turn on the Blazer LEP light, you immediately notice the bright spotlight effect. This light shines a super focused beam. If it’s on a wall close to you, it’s not much bigger in diameter than the light head itself. This is expected from a light that has a 315,000 candela rating. Even at distance, the beam does not spread out that much. The LEP also has a cool white light, not the harsh style that a lot of LED lights have.

Green Filter LEP

Approximately 450 yds, LEP

Diffused LEP

  The Blazer LEP serves a purpose for target identification at long range. Z-Bolt claims a 600 meter Positive Identification of Target (PID). Which I believe after using it. I found the LEP to be exceptional at it. So much so that I needed binoculars or a magnified optic to see what the Blazer LEP was illuminating, as you can see in some of the pictures. I was able to illuminate a tree at approximately 450 yards and make out the branches. Granted the picture is a little blurry, but the tree was in focus for me when looking through a rifle scope set to about 14 power. It would be real easy to see a person at that distance, and maybe slightly harder to see a hog or coyote, but it can still be done. The light throw on the Blazer LEP is just that great. Now if you need to throw some light off to the sides, the LEP comes with a “Hotspot & Spill” diffuser. This gives the light a 15 degree spill with a center hotspot. It also cuts the range of the light down to about 150 yards. This filter just screws on. The filter worked okay for me, I just didn’t care for how it limited the lights range. There are also different filter options available from Z-Bolt. They range from a dedicated 15 degree spill to a full 40 degree for CQB or full room illumination. Another benefit of the Blazer LEP is its ability to punch through photonic barriers like smoke, fog, or tinted windows. 

  Battery run time is also good on the Blazer LEP. Using the supplied 18650 battery, run time is 130 minutes according to Z-Bolt. Let’s just say that when I was taking all the pictures , I didn’t have to change the battery out. The 18650 bodied lights, like the LEP I am using, can also run on 2 CR123 batteries. This will limit the run time to 90 minutes. That is still a respectable hour and a half on store bought batteries. 

approximately 200 yds, LEP

  If you are using the LEP to predator hunt, the light kit that I was sent, has a red and green filter. I found the red didn’t illuminate all that well. If using it with night vision, it should be good and not so bright as to cause problems. Now the green filter was super bright with the naked eye. It really makes the LEP light look like a wide green laser. It has a really good throw to it also. I was able to identify stuff at 200 yds without problems. 

  For target identification at longer ranges, the Blazer LEP is great. If you want to see what's across the canyon in the pitch black of night, the LEP is for you. If you are looking for a general use weapon light, I would choose the Blazer LED below. But in the “see far away” white light market, my choice would be the LEP.

LED:

  If the LEP style of long throw light isn’t for you, don’t fret, Z-Bolt has a LED style light. The Blazer LED is touted as being a long throw LED light. It has a respectable beam throw, but still gives a 60 degree spill to the beam. This gives a “Hot Spot & Spill” style pattern, and it works well. Z-Bolt states target PID out to 200 meters. Since I was able to light up 200 yard targets, I do agree with them. A big advantage to the LED light is its spill. I can light up the inside of a room okay, but yet it still gives me a good beam throw for those mid range targets. If I could get a little more spill and still have the same light throw, I’d like the Blazer LED even more than I do. The Blazer LED is listed at 65,00 Candela and 650 lumens, which is why I get a good combination of spill and throw.

LED Spill and hot spot

  Z-Bolt sent the combo version of the LED light. That meant it came with a 18350 scout body and a handheld body. The 18350’s are a shorter 18650 and hence give lower length run times. This LED version only has a run time of 60 minutes. Still pretty good considering what you are getting as far as light output. If you aren’t looking for a combo, the LED lights can be had individually for a competitive price.

Tree line is around 150 yds, LED

LED

  I’m not going to say much about the weapon light version of the Blazer LED, because all the specs transfer over to the handheld version. The weapon light configuration just mounts to a rifle using the standard “scout” mounting platform. So off to the handheld version. The handheld configuration of the Blazer LED uses a separate clicker tailcap and body. Basically it’s smooth and void of mounting nubs. This configuration makes for a great handheld light! Plus it is only 4 ⅞ inches long. This is shorter than a lot of so-called EDC lights. It can also be used with the THYRM style of pocket clips. This particular kit came with the Thyrm Switchback. I didn’t use it as I am one who just lets the light float around in my pocket, which I probably shouldn’t. I’ve been pleased with the Blazer LED as an EDC flashlight.

  The Blazer LED is a decent white light. In either the weapon mounted configuration, or the handheld configuration, it performed well. I like it both as a handheld and weapon mounted light. The beam throw works great in either form. In the handheld configuration, the beam spill is fine for me. In weapon mounted form, I’d like a little more spill. Either way, the Blazer LED makes a good EDC or CQB light.

  If you are in the market for long throw lights, Z-Bolt might have what you need. The Blazer LEP’s extreme long throw really lets you reach out and identify targets. If you don’t need that much range, but still need some, the Blazer LED is a great option. I would consider both the Blazer LED and LEP to be top tier lights in any configuration. They even use industry standard mounting, battery bodies, and tailcaps, which makes choosing them, as an option, even easier. If you need a long throw, handheld, or weapon mounted light, head over to Z-Bolt Electro Optics and check them out.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Long throw weapon lights

Target Market:

LED - Those wanting a bright handheld light that also functions as a great medium range weapon light

LEP - Those needing to see or identify targets at long ranges

FNBs (Features & Benefits of this product):

LEP

  • Light on Target: 315,000 Candela

  • Run Time: 130 Minutes, 1 pc Z-Bolt 18650

  • Run Time: 90 Minutes, 2 pcs Z-Bolt CR123A 

  • FDA Laser Safety Class 1: Certified EYE-SAFE

  • Max Beam Throw: 1,100 meters (ANSI FL1)

  • Battery: 2 pc 18650 - 3.7V,  Z-Bolt 3500 mAh Lithium (Long Barrel) 

  • Battery: 2 pcs CR123A, Z-Bolt 1500 mAh (Duel Fuel - Long Barrel ONLY)

  • Surface - Anodized FDE

  • Warranty: 2 Years from Date of Purchase

  • Environmental Rating - IP65

  • Scout mount body

  • Includes Green & Red Predator Hunt Filters

  • Includes Twist On Beam Diffuser “Hot Spot & Spill”

  • Clicker tailcap switch

  • LEP Module: Fully Potted to Withstand Shock & Recoil

  • Length 168 mm, Width 33 mm

  • Weight: 5.4 ounces / 153 grams 

  • Body Material:  T6061 Aluminum Alloy

LED

  • Extreme Beam Throw: 200 Meter PID  

  • Run Time: 60 Minutes, 1 pc 18350 Lithium Rechargeable

  • LED & PCB: Fully Potted to Withstand Shock & Recoil

  • Battery: 1 pc 18350 - 3.7V,  Z-BOLT® 1400 mAh Lithium (Short Barrel)

  • Weight: 91 grams / 3.2 oz (without battery installed)

  • Length: 4 1/8 in. (104mm) (No Tailcap)

  • Body Material:  T6061 Aluminum Alloy

  • Surface - Mil-Spec Hard Coat Anodized: Z-BOLT® FDE

  • 65,000 Candela & 650 Lumens

  • Mid-Range Hot Spot & 60° Flood/Spill 

  • Superior Mid-Range Illumination & PID @ 50-100 Meters

  • Includes 1 pc Light Body Package & Choice of THYRM Pocket Clip

  • Switch Light Head Between Weapon Mounted & Hand Carry/Duty Carry/EDC

  • Scout mount body

  • Handheld body with clicker switch

  • Extra Momentary tailcap switch for weapon light body

What other aesthetic options or finishes are available?

Black versions, different mounting options, different tail caps

What others are saying?:

Not much found

Link to other reviews:

LEP - OreGear YouTube   

LEP - TFB review  

LED - Big Dick Ballistics

Price point:

MSRP = $228.00 and $298.00 as tested

Retail = LED’s start at $168.00

LEP’s start at $288.00

I need it now! Availability:

Z-Bolt Electro-Optics

Our Rating:

Pros:

  • Super long throw for LEP

  • LEP beam diffuser 

  • Good throw for LED

  • Handheld options

  • Standard Scout style mounting

  • Uses standard size 18650 & 18350 batteries

  • Different tailcap and switches available

  • LED light is priced well for what you get

Cons:

  • FDE colors don’t match each other

Score: 8.50 Great - for both lights

Favorite Link:  Zaffiri Precision P320 Slide

Streamlight ProTac 2.0 Weaponlight

  When it comes to weapon lights, there are plenty on the market. The new Streamlight ProTac 2.0 Weaponlight is one of them. This Streamlight 2.0 falls somewhere between those cheap Amazon lights and the super expensive “pro” lights. Don’t underestimate the ProTac 2.0, it has some really nice features. As of right now, it is only available in a kit with a pressure switch.

ProTac 2.0 light output on “HI”

Vehicle “Hi Beams”

  If you are in the market for a weaponlight, there are a few things to take into consideration. The first is probably lumens. Everyone has a lumen rating for their light and it’s usually advertised highly. But remember that lumens don’t tell the whole story about lighting, there is also candela. In simple terms, lumens measure total brightness and candela measures how that brightness is applied. The Streamlight Protac 2.0 has a max brightness of 2000 lumens and a candela rating of 17,700. In the case of the ProTac 2.0 you get a bright output but a wider beam pattern. The higher the candela rating, the more focused the beam is, or how much farther the light will project. Streamlight rated the beam distance at 266 meters for the 2.0. In comparison, Streamlight’s HL-X has half the lumens of the ProTac 2.0, but a candela of 27k for a beam distance of 332 meters. A higher candela rating will also help the light push through photonic barriers, like smoke or fog, better. The ProTac 2.0’s beam is really good for buildings and rooms where there isn’t a need for target identification at 200 yds. It would make a good light for your home defense rifle or shotgun.

Target backers at 50 & 100 yds, barely visible are 200 yd backers

  The ProTac 2.0 Weaponlight has some other impressive attributes. It’s not incredibly long at 6.3 inches, or heavy at just over 9 ounces. It comes standard with a picatinny mount. If you don’t like the picatinny mount, the Protac 2.0 uses a standard “scout” mounting platform. This makes MLok mounts and the like fairly easy to come by. I installed a 45 degree MLok mount on it since I didn’t like how far off the rail the picatinny mount mounted the light. The ProTac 2.0 also comes with a pressure pad. This is only a pressure pad with no switch on it. New for Streamlight is the way the pressure switch attaches to the light. There is a dual end cap. The end cap has a switch, but also has an outlet to plug in the pressure pad. This way one can use the switch and the pressure pad. Before, you were limited to one or the other. I must say, this dual end cap setup is pretty nice. If not using the port, an attached plug can be used to keep it protected.

Charging port slid open

  The Streamlight ProTac 2.0 is rechargeable. There is no option to use off the shelf batteries if needed. The battery used is also proprietary. Extra batteries run around $30. There are, however, some different ways to charge the battery. On the body of the light, there is a sliding cover over the battery's charging port. Just slide it down from the lights head and plug in your charging cord. The cover slides over an o-ring to protect it from water and dirt. The cover never opened up by itself, so that's a plus. The other way is to take the battery out and plug the charging cord into it directly. This new battery gives the ProTac 2.0 a 2.5 hour runtime on high or 11 hours on low.

  Streamlight is known for their ability to program the lights function. The ProTac 2.0 is no different. It still uses their “Ten-Tap” programming. Press the button 10 times fast, holding it down on the 10th “tap”. Once the light goes out, release the button. Now you are in the next mode. Do this until the mode you want is selected. The ProTac 2.0 has 3 programming options. They are: High/Strobe, High only, and Low/High. I have it set to high only, but choose what works best for you. Low output is 250 lumens. Strobe and high are 2000 lumens.

  I really enjoyed how the ProTac 2.0 functioned. The pressure pad, along with the included mounting hardware, worked great. Since the pad doesn’t have an on/off switch, I use my thumb on the tailcap switch. That way if I need it to be always on, I just push the button. Having that ability, with the new dual tailcap, is really nice. The light output is bright enough to light up my entire living room or bedroom. I can’t identify targets very well at over 100yds, but they can still be seen just fine. I just can’t see if they have a weapon or not. I immediately changed out the picatinny mount because it put the light too far away from the rail, so it was awkward to reach the tailcap button. Having the standard “scout” mounting platform made that an easy fix.

  The Streamlight ProTac 2.0 Weaponlight kit is a good all around light. Especially if you don’t mind proprietary batteries. If it’s your first weaponlight, then those batteries won’t matter as much. The light is programmable and bright. The new tailcap makes the light more useful too. At a price of around $170, the Protac 2.0 is something to look at. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

2000 Lumen weapon mounted light kit

Target Market:

Those needing or wanting a weapon mounted light

FNBs (Features & Benefits of this product):

  • Uses one (1) Streamlight SL-B50® protected Li-Ion USB-rechargeable battery pack (included)

  • Features TEN-TAP® programming - Choice of three user selectable programs:

  • 1) high/strobe  2) high only  3) low/high

  • High: 2,000 lumens; 266 m beam; runs 2.5 hours

  • Low: 250 lumens; 93 m beam; runs 11 hours

  • Strobe for signaling or disorienting: runs 4.5 hours

  • IP67-rated; dust-tight and waterproof to 1 meter for 30 minutes (IPX4-rated when remote switch is plugged in)

  • 2-meter impact resistance tested

  • 6000 series machined aircraft aluminum with Type II MIL-Spec anodized finish

  • Mounts directly to guns with MIL-STD-1913 (Picatinny) rails

  • Includes remote pressure switch

  • 6.30 in (16.0 cm)

  • 9.06 oz (257 g) with one (1) SL-B50® battery pack

  • Limited Lifetime Warranty

What other aesthetic options or finishes are available?

Handheld version

Price point:

MSRP =  $245.00

Retail = $169.99 at Primary Arms

I need it now! Availability:

Primary Arms

Our Rating:

Pros:

  • Hi Lumens for lots of light spill

  • Dual connection battery cap

  • On weapon charging

  • Decent pressure switch

Cons:

  • Proprietary battery

  • Low Candela 

  • Only comes with 1 battery

  • Picatinny mount

Score: 7.00 Good

Favorite Link:  Atibal Optics

Surefire X300 Turbo

By: Shan Hemphill

  Surefire is known for supplying quality, robust lights that are made in the USA, and supplies heavily to law enforcement agencies. Surefire products have a lifetime warranty, and there are many comments on the Internet about how Surefire has quickly resolved problems. Surefire is also known to be slow to release new lights, so their Turbo versions of the X300 and Scout have been heavily anticipated since their announcements at Shot Show 2022.

  I obtained 4 samples of the X300 Turbo, allowing me to gather data from multiple lights, then compare versus some of the best in the industry.

Specs:

Lumens: 650

Candela: 66,000

Runtime: 1.5 hours

Batteries 2x CR123A

Switches: Ambidextrous push (momentary) / toggle (constant)

Water Protection: IPX7

In the box:

  Inside the packaging is the light itself, 2 Surefire-branded 123A lithium batteries, instructions, and rail keys depending upon whether you’ve purchased the “A” or “B” version. The “A” version utilizes a spring rail key attachment system, and as a result, the box includes an extra spring rail and a tool to remove. The “B” version includes an extra rail key. Both also include a battery door pin to help keep the door from opening unexpectedly. 

  Fitup of either version is easy, but be aware that this is a large pistol light. It fits on the majority of pistols that utilize a full size rail, but it sticks out beyond the muzzle on most full size pistols. It even sticks out beyond the end of my compensated Glock G19x.

  The X300 Turbo is exactly the same size as the X300 Ultra. That’s important because there are a million holsters for the X300U;  you should be able to find concealment holsters for IWB or OWB, and if you’re on duty using a X300U already, you can keep your existing retention holster.

  Even though the package is long, I have been comfortably carrying the pictured package AIWB. Yes, that means I appendix carry one of the longest pistol and light packages on the market. I do so in the Werkz M6 holster, but I carry in the deep position with a little negative cant dialed in. I find this quite comfortable and easy to carry day in and day out. While it’s not G43x small, it’s workable.

  The light takes two CR123A batteries. While many people now prefer rechargeables for their lower cost and higher output capability, I do appreciate prime batteries for their long-lasting power output, and that I can easily swap batteries while training. 

  I tested all 4 of the X300T samples for lumen output in my integrating sphere, capturing both the absolute maximum, and calculating the ANSI / PLATO FL-1 lumens (which average readings from 30 to 120 seconds). Here are my results.

I also captured candela using similar measurements.

  All the lights performed well, but I did observe some variance between them. This is typical of lights; the electronic components (especially the LEDs) can vary from light to light giving different readings. 

  It is interesting how the light seems to get stronger for about the first 15 seconds, then it levels out and drops off.

The competition

  Given the high candela output of this light, probably the best light to compare to is the Modlite PL350 using either the OKW or the PLHv2 head. The PL350 is similarly priced, and the OKW head is rated at similar candela output at a rated 69,000cd. Here are my measurements:

  As we can see here, the new X300 Turbo has significantly more candela than the Ultra, and has competitive output compared to the PL350 with the OKW head. This is impressive output from CR123A batteries.

  I measured candela at angle, which provides a graphical view of the width of light intensity. If wider angles have higher candela output, then the light has more flood. If a light has a peak, then drops off near zero, then it has all throw and almost no flood.

    In this case, you can see that the PL350 with the PLHv2 head has a fair amount of output up to 5 degrees. In comparison, the X300U is much flatter, showing in graphical terms how it provides much more flood than the other lights.

  I also gathered lumen data, which allows me to measure instant max lumens, and calculate ANSI / PLATO FL-1 lumens, and runtime.

In this chart, we see that the highest lumen is from the Ultra, which is no surprise given that light’s focus on output and flood. There are two Turbo samples here because sample 1 seemed to have an issue with runtime that I didn’t see in the other 3, so I included sample 2 as an example of how the majority of the units tested out. It’s good to see that the Turbo can run 1:15 still outputting almost 400 lumens. 

Practical Testing

I stood downrange and had each of the lights shone into my eyes. Excepting the Ultra, all of these lights were painful to look at and I had a hard time determining distance or position of the person holding the lights. From the camera angle, you can see that all of these lights provide a degree of flood, and each light has a slightly different color tint.

Summary

Here is a summary of the data shown here:

Based upon the data gathered here, I personally am upgrading from my Streamlight TLR-1HL to the Surefire X300T. In particular, sample 3 impressed me not only with output but also with a slightly warmer color temperature out of the group. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Candela is competitive with the best pistol lights, backed by the Surefire reputation and fits in existing X300 holsters.

Target Market:

Military, law enforcement, and citizens who want some of the highest throw possible in a pistol light.

FNBs (Features & Benefits of this product):

  • Feature: 66,000 advertised candela

    • Benefit: Provides high throw capability – can illuminate further out than most pistol lights

    • Benefit: Defeats photonic barriers such as auto glass, headlights, and dark corners better

    • Benefit: Helps control subjects better by blinding themselves

  • Feature: Same form factor as the X300U

    • Benefit: Fits in all your existing X300 holsters

  • Feature: Retains X300 existing momentary and constant switches

    • Benefit: Operator can select between momentary activation and constant activation

  • Feature: Surefire build and reputation

    • Benefit: High quality made in the USA product with an excellent warranty

What other aesthetic options or finishes are available?

Comes in “A” and “B” flavors. The A version uses a sprung lever & key to lock in to the rail. The “B” version uses a key but has a screw to clamp to the rail. My personal preference is the “B” as I can clamp it down and eliminate rate. However, many people also have good success with the A version by using the correct key, or by putting some electrical tape on the top to reduce or eliminate the rattle.

Comes in black and tan.

What others are saying?:

T-Rex Arms:

Surefire was able to change the throw of this light without changing the external dimensions or size of the light itself, so you’ll be able to use with the holsters out there. They were able to squeeze this power out of CR123A batteries.

Big Tex Ordnance: 

“Still the standard, I regretted trading up to the 1000lm from the 500, this has the right spot and a nice flood, fits my existing setup and I might be losing it but the switches feel a lot easier to manipulate than the ones on the 1000.”

“Great light; amazing throw, intense hotspot, but still has a decent amount of flood. This is nearly as good outdoors as my Cloud Defensive Rein while being much smaller and still being the same size as my X300U. I don’t think you need to run out and replace all your old X300s and TLR-1s, but if you’ve got a handgun that needs a light, this should be a no-brainer.”

Link to other reviews:

https://youtu.be/Ra2j0mo_5zU

https://www.lowlightdefense.com/surefire-x300-turbo-the-king-reclaims-the-throne/ 

https://www.reddit.com/r/tacticalgear/comments/wjrnue/x300_turbo_is/ 

https://www.youtube.com/watch?v=9Ne1U85IEBA 

Price point:

MSRP = $379   

Primary arms = $322   

Big Tex Ordnance = $322

I need it now! Availability:

Seems out of stock everywhere. I think Primary Arms might be a good source.

Our Rating:

Pros:

  • Some of the highest candela in this segment. 30 seconds in, my 4 lights averaged 61k. Some people think candela is only for rifles, but it is also useful for defeating photonic barriers such as when shining a light through a car windshield and against the car’s headlights. Candela also helps blind a subject, making it difficult or impossible for them to see you.

  • Still has decent flood, similar to the Modlite OKW. Not as wide as the Ultra, but testing shows it sufficient for most indoor operations. Output is good, and for indoors it is possible to shine the light up (umbrella lighting) or down against the bottom of the wall (baseboard) to help diffuse the light.

  • Consistent output: our testing shows 96% output consistency from run to run. Some lights are much lower, down around 85%. 

  • Generous runtime of 1.5 hours

  • Utilizes existing X300 holsters, and literally everyone makes holsters for pistols with the X300.

  • Switches provide both momentary and constant activation, and do so intuitively.

  • Utilizes common CR123A batteries.

Cons:

  • This is an expensive light at just over $330 street price.

  • Switches are adequate and provide both momentary and constant activation, but they can feel stiff or sticky, and the momentary activation pokes my thumb  under recoil. 

  • Some people will see the high candela and lack of flood as a reason not to run the light. My experience is that high candela lights do restrict some of the peripheral view, but I know how disorienting a high candela light can be when it’s aimed directly at my face. I can overcome most of the concerns about “blinding myself” or “it’s too focused” through training.

  • It’s still a large light, one of the largest on the market. 

Score:

This is now my EDC light on my Glock 19x. 

I rate it at 8.50 - Great. 

Favorite Link: Geek out on all the data HERE

Powertac M5 G2

  Once upon a time, I wanted a new pocket carry tactical flashlight. I liked the Powertac light that they had previously sent for review, but it was physically longer than I wanted. Then, Powertac came out with their M5-G2. This was almost exactly what I wanted in a handheld light. High lumens, good candela, and a shorter package. So I purchased one. A few months later, I received another one because of Powertac’s affiliate program. 

  The M5-G2’s normal functions are pretty intuitive. The tail cap button turns it on or off. It also has momentary on, if you just push the button down slightly. The button is recessed into the tail cap. I’m really glad that Powertac did this over the E9. It allows the flashlight to stand on end with the light going up and out. This way you can light up a whole room by setting the light on a table or floor without it falling over. When I say the button is recessed, there are still cutouts on each side, so that you can have easier access to the button.

Tail Switch

Mode selector / strobe button

  I also want to say that this light is bright. On “turbo”, which is the highest output mode, it produces 2030 lumens with 27,225 candela. Because of the candela, the beam on this light is pretty focused. This is good for lighting things up at longer distances. It also produces a noticeable “spot” in the beam pattern. I really like the beam pattern as I like to see what the flashlight is pointed at. Because of how bright the beam is, it does still supply plenty of light spill outside the “spot”. It will definitely light up a room.

Vehicle High beams

M5 G2 on Turbo mode

Turbo mode

  Along with the “turbo” mode, the M5-G2 also has 4 other brightness modes. All the brightness modes can be cycled through using the side button. This is, of course, after the light has been turned on using the tail switch. The side button is located at the front of the flashlight. Just push it once for every time you want to increase the brightness, from “firefly” to “turbo”. Whatever brightness you have the light set on when you turn it off, is what brightness it turns on at. The strobe function also uses the side button. Just hold the button down for about 1 second and the light starts strobing. When you want to turn the strobe function off, just tap the side button and it will return to the regular light. 

G43 for size comparison

  As mentioned, the Powertac M5-G2 has 5 levels of brightness. These levels are using the supplied 18650 battery. 2-CR123’s can also be used. See the chart below for these runtimes and settings. I found the “firefly” mode to actually be very useful in full darkness. It gives me just enough light to see what I’m looking for, but not too much to be blinding. It may also work as a good task light under night vision. I usually end up using the “medium” setting for everyday use. I usually turn it to the “turbo” mode before turning the light off, just in case I actually need the light for identification. I never use the strobe function, but some might.

  The M5-G2 comes with a lot of standard EDC light features. First off, it has a removable and swappable pocket clip. It can be swapped from top to bottom for either light up or light down carry. I’m not keen on the pocket clip as it is a little flimsy. If you catch it on something, it can either bend or pull off of the light completely. It’s a good thing I don’t use the pocket clip. In the box is also a wrist lanyard that hooks into the tailcap. If you like lanyards, this one is pretty decent. I like that the M5-G2 uses a 18650 battery and that it is included. To charge the light, Powertac includes a magnetic charger cord. This cord plugs into a usb on one end and then snaps onto the magnetic charging port at the front of the flashlight. The charging port is on the opposite side of the mode button. When charging, the mode button turns red. When finished charging, it turns blue. The M5 is also waterproof down to 2 meters. So yes, it does actually work underwater. But probably more important is that it will work in rain and snow.

  At a little under 5”, the Powertac M5-G2 is a good size. The smaller size, of this light, is exactly what I wanted. At 1” in diameter, at its largest part, it is extremely narrow also. To top it all off, it only weighs a hair over 4 ounces with the battery and pocket clip!

  As you can tell, Powertac did a really nice job with the M5-G2. It is everything needed in a good pocket EDC light. It’s bright, has good light throw, and is lightweight. Did I mention it’s only 70 bucks. If you’re looking for a good edc light option, definitely go check out Powertac lights and the M5-G2. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Small, bright EDC flashlight

Target Market:

Anyone needing a good EDC flashlight

FNBs (Features & Benefits of this product):

  • 2030 lumen max output

  • 27225 max candela

  • 330 meter throw

  • Magnetic charging

  • 2.5+ hour runtime on high

  • Optional CR123 use

  • Tail Switch Provides Both Momentary And Continuous Modes

  • Integrated Side Switch For Quick Access Of Different Modes

  • 6 Different Settings That Include 5 Levels Of Brightness Plus A Strobe

  • Anti-Slip Knurling And Matte Style Finish For Firm Grip

  • Removable Pocket Clip

  • Auto Memorization For All Settings

  • Reverse Polarity Protection Protects From Improper Battery Installation

  • Machined From Aircraft Grade Aluminum With Type Iii Anodized Finish

  • Tempered Glass To Resist Breaking And Scratching Upon Impact

  • Mountable With Optional Remote Pressure Switch

  • IPX8 Waterproof Submersible Up To 2 Meters Under Water

  • Length: 124 mm or 4.88”

  • Bezel Diameter: 25.4 mm

  • Body Diameter: 23 mm

What other aesthetic options or finishes are available?

Other models available   

What others are saying?:

5/5 stars on Amazon 

Solid made and powerful light! 

I use this light for night time jogging or checking backyard woods. The throw distance is awesome and you can see all details clearly in the dark! It comes with magnetic charging as well! It is a durable, powerful, solid built light! Definitely will recommend this light to friends!

Link to other reviews:

PNW Outdoor Reviews   

Price point:

MSRP = $69.95

Retail = $59.46 with code “GGR”

I need it now! Availability:

Powertac or Amazon 

Our Rating:

Pros:

  • Bright

  • Uses 1 - 18650 battery

  • Can stand on tailcap

  • Momentary on

  • Ultra low setting

  • Physical size

Cons:

  • Pocket Clip

Score: 8.00 Great

Favorite Link:  Atibal Optics

Acebeam E70

  When looking for an everyday carry flashlight, the choices can be overwhelming. There are so many good options out there. Acebeam happens to make a few of those options. One of those options is the Acebeam E70. This particular version is made from aluminum and the real model number is E70-al. The E70-al is what I like to call the “base model’, as more expensive versions are available.

  The Acebeam E70 is around the same size as most tactical flashlights. It is however slightly larger in diameter. It comes in at 5.05” long, 1.06” wide, with a 1.18” diameter head. Or 128.3mm x 27mm x 30mm. Part of the reason for the larger diameter is that the E70 runs a larger 21700 rechargeable battery instead of the more common 18650. Another reason for the size is the cooling spirals. These are grooves cut into the outside of the housing. Acebeam then has a solid blue sleeve inside the outer case. Besides the cooling aspect, it makes for a very good looking flashlight.

  Functionality of the E70 is a little different then a person might be used to. To turn on the E70, you double tap the tail switch. This turns the flashlight on to the last programmed setting. Either low, medium 1, medium 2, or high. To set the programming, turn the light on, then hold the button down. The E70 will cycle through the four modes, just release the button when the desired mode is met. The E70 also has a moonlight mode and a turbo mode. To access the moonlight mode, just hold the tail button down while the E70 is off. To access the turbo mode, the E70 must already be on, in any of the four modes, then double tap the button again and enjoy the brightest output from the E70. Once in turbo mode, you can double tap the button again to take you back to the normal setting you were previously on. When the light is on, you can also triple tap the switch to access the strobe function. In any of the modes, just hit the button once to turn the E70 off. The learning curve to use the E70 is very quick, or at least it was for me.

  When looking for an EDC or Tactical light, one usually looks at candela and lumens. All of these ratings are down below in the FNB’s, as well as run time. I wanted to go over a few of the ratings. For instance, if you want maximum lumens and candela, you must access the Turbo function of the Acebeam E70. Since the Turbo function has a max of 4600 lumens, the thing is stupid bright close up. However, since the Turbo mode, and all the other modes, have a somewhat lower candela, the throw is not as far as most tactical lights. The Turbo mode is listed as 14,400 candela. Because of the lower candela rating, the light pattern coming out of the E70 is very wide. This works well for lighting up a decent sized room, but identifying something out at 100 yds can be difficult. I knew that this was a wide beam flashlight when I asked for it, so I’m not faulting it for the wide beam. Acebeam sells this as an EDC light, not a tactical light. As an EDC light, it works very well.

E70 Turbo mode - notice wide flood pattern

Vehicle High beams - notice more throw

  There’s a few other notable mentions on the E70. For one, the pocket clip is screwed on with two tiny screws! No more having the pocket clip pull off of the flashlight body. The screws did loosen up on me fairly soon into using the light, but a little blue loctite and they haven’t loosed up since. Since the E70 is an EDC light, the tail switch is recessed a little into the end. This allows you to set the flashlight on its end. So if you need to go hands free, and still need some light, just stand it on end and set it somewhere. Having a recessed button, also helps prevent the light from turning on as easily in your pocket. The E70’s bezel is also serrated to use as an impact weapon. It comes with a wrist lanyard too, if you’re into those things, I’m not.

  Using the E70 is pretty self explanatory. At least once you get the button presses down. I really was pleased with how well the E70 worked for me. I would have liked a little more throw, but the light works great and is super bright in the Turbo mode. The pocket clip is also mounted up high, so I was actually able to use it. It’s definitely a deep carry clip. I like that it’s pretty much water proof, so if I drop it in a lake, it won’t die. I chose the 6500k color temperature option, as it is essentially the brightest, but Acebeam does offer it in other color temperatures. 

  The Acebeam E70 is a decent EDC light. It’s not a tactical light, but still has some tactical applications. After all, it’s not being mounted on a rifle, or is it made to be. The E70 will do what most people want from an EDC light. It would make a great addition to someones camping gear, or as a present for someone who needs a bright flashlight, but isn’t tacticool. Go check out the Acebeam E70. Acebeam makes a bunch of other lights that might interest you if the E70 doesn’t

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

High output EDC flashlight

Target Market:

Those who carry and use a flashlight often

FNBs (Features & Benefits of this product):

  • Moonlight: 1 lumen;  11 days

  • Low: 50 lumens; 50 hours 

  • Mid1: 180 lumens; 625cd; 50 meters; 12 hours 45 minutes

  • Mid2: 650 lumens; 1,600cd; 80 meters; 4 hours 

  • High: 1,300 lumens; 3,600cd; 120 meters; 1 hour 45 minutes

  • Turbo: 4,600 lumens; 14,400cd; 240 meters; 1 hours 30 minutes

  • Strobe: 1,650 lumens; 2 hours 30 minutes

  • IP68 rated (2m waterproof)

  • 1m impact resistance

  • Screwed on pocket clip

  • Flat tail switch

  • 21700 battery

  • 128.3mm (Length) x 30mm (Head Diameter) x 27mm (Tube Diameter)

  • 102g(3.59oz.) w/o battery

  • Double click on

What other aesthetic options or finishes are available?

5000k and CR195 @ 4500k color temperatures

What others are saying?:

Nothing found that was worthwhile  

Link to other reviews:

Zeroair

Price point:

MSRP = $99.80 as tested, $79.90 without a battery

Retail = $94.99 on Amazon

I need it now! Availability:

Acebeam or Amazon

Our Rating:

Pros:

  • High Lumens

  • Bright

  • Good runtime

  • Flat switch

  • Screwed on pocket clip

Cons:

  • Low candela so really wide pattern

  • Very little throw

  • Uses a “not as standard” battery

Score: 7.50 Good

Favorite Link:  Gun Guys Garage