at-one

Boyds At-One Shotgun stock


 As mentioned in the previous Boyds At-One review, Boyds has been making laminate wood stocks for a long time. So you most likely have heard of them. They have since come out with the At-One for pump action shotguns. So they asked me if I would like to review it, and here we are.

 Boyds gunstocks history goes back to 1981. But they have definitely kept up with the times. The stocks are inletted with CNC machines. Only US grown hardwoods are used for the laminate process. Boyds’ stocks are also hand sanded so that the smoothness is just right. I’m told the factory is even temperature controlled to maintain consistency. All of this, and finished off in a special hard finish that seals the stock, including the inlet portion, to protect it from the weather and make it last for years

 As of right now, they only make the shotgun At-One for two models. Those models are the Remington 870 and the Mossberg 500. I chose the Mossberg 500 version in “Sky,” which is a blue/grey/black laminate. Now, when the marketing rep and I ordered this, we did not look at everything, so the forearm was the wrong one. I now know that there are two different action slide lengths for the forearms. I have the shorter one. So when ordering, please read the fine print at the bottom. This was by no way Boyds’ fault, it was mine. But as the saying goes “the more you know.”

 On to installation. The stock and forearm go on pretty easy. Take the buttplate of your old stock and unscrew the bolt holding it on. It should come right off. Then you need to install the included metal adaptor to your receiver. The stock comes with all the hardware needed and really good instructions. Pretty easy so far. Now you have to install the stock to the adaptor with more supplied hardware. First you have to remove the bottom cap off of the stock so that you can have access to the screw hole. Then you can install the stock itself. This is where I ran into a little bit of a problem. The hole and supplied screw are at an odd angle, so getting a long enough allen wrench in the hole is key. My universal nut driver, with allen head bits, was just too large in diameter to fit down in the recessed hole. Because of this, I took out a tiny chunk of wood where the bottom cap meets the stock. I should have just ordered a long allen allen wrench, which fits fine. Once that’s done, screw the bottom cap back on and the stock is good to go. The forearm went on easy. Just loosen the odd nut (I’m sure it has a name) that holds on the forearm. A special tool works best, but I just used a big chisel as a huge screwdriver (not recommended). I did remove the forearm from the shotgun first. Then I just lightly tapped the new Bantam forend on, installed the odd nut, and reinstalled the forend and rails onto the shotgun. It was really fairly easy.

 Now that the At-One is installed, it’s time for my experiences with it. As with the other At-One I reviewed, it is very comfortable to shoot. All of those adjustments really give the shotgun shooter an edge. Finally a stock that can be adjusted for the individual user. My Mossberg 500 has never really fit me correctly, until now. Since the comb on the At-One is adjustable, I was able to raise it up a little more than the fixed factory stock. This improved my shooting some. The length of pull on the Mossberg was fine, but with the At-One, I could fine tune it just a little more. However, I wasn’t real keen on the sharpness of the pistol grip. I liked it on the rifle, but prefer a more rounded one on the shotgun. If you want a larger pistol grip, they make the target one, which adds more meat to the grip and also changes the angle slightly. Another advantage to the length of pull, is how short the Boyds stock can go. One can shorten it up to 12.5” and out to 14.25”. If you want to make a more maneuverable shotgun, say for moving through a house, you can adjust the stock all the way in. It also works good for shorter armed shooters. The buttons to adjust the buttpad and comb have a very stout spring in them making them hard to push. This is done on purpose to keep any accidental adjustments from happening. Now I will say that the buttpad on the At-One is nice, but on a shotgun, a softer one would be nicer. It is the same buttpad as on the At-One rifle stocks. Now If you are really into adjustments, Boyds does offer a vertical adjustable buttpad system.  

 Boyds makes some really nice products. The At-One for shotguns is another one. It is available in a standard walnut also, in case you don’t like the laminate look. I personally like the laminate’s. The adjustability gives these stocks an edge in the field or on the range. Now, if they only made them for semi-auto shotguns. Take a look at Boyds gunstocks, they make a nice product.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Adjustable laminate wood shotgun stock

Target Market:

Those wanting adjustability and/or different looks from their shotgun

FNBs (Features & Benefits of this product):

  • Laminate Hardwood

  • Adjustable Butt pad

  • Adjustable Cheek rest (Comb)

  • Interchangeable Grip

  • 12.5" to 14.25" Length of pull

  • .75” of comb adjustment

  • Made in USA

What other aesthetic options or finishes are available?

Too many to list, go check them out HERE

Vertical adjustable buttpad

What others are saying?:

Couldn’t find anything on the shotgun stocks, only rifle stocks

Link to other reviews:

Could only find “new release” articles

Price point:

MSRP: Stock = $175.00

           Forend = $67.00

Retail = Same as above

I need it now! Availability:

Boyds Gunstocks

Our Rating:

Pros:

  • Adjustable comb

  • Adjustable length of pull

  • Optional pistol grip

  • Stable Laminate

  • Great installation instructions

  • All US made

Cons:

  • Tough to get stock screw tightened

  • Buttpad could be softer

Score: 8.00 Great

80.jpg


Favorite Link:  Tony’s Diversityshoot.com










Boyds AT-One Stock

  If you have been around guns for any length of time, you have probably heard of Boyds gunstocks. They make laminate wood stock for just about every rifle, and in a bunch of patterns and colors. They sent me one of their new At-One stocks in "Blaze" for review.

  First off, let me mention that this At-One is for a Savage 93 in .17HMR. Boyds also makes this stock for just about any other popular rifle. I mention this because in my case, I had to order the bottom metal. Not a big deal, but a note to check and see. Otherwise, installation is super easy. Just take your old stock off, and install the At-One. One benefit of the At-One is that it free floats the barrel to help improve accuracy.

  As one can see, the At-One has some adjustments on it. The comb and butstock adjustments use a push button system that is built into the right side of the stock. Basically, just push the button, and slide the comb or buttstock to the position you want. The buttons do push pretty hard, but this is because Boyds doesn't want them to be pushed accidentally. The cheek riser/comb is an overmolded rubber and works well without having too much grip. The buttstock has a nice rubber buttpad bonded to aluminum for a stable platform. If you look at the stock, you notice that the pistol grip and foreend are plastic. It comes from the factory with a slimmed down version of both. But I was also sent the target versions of these. The target forearm is slightly wider and rubberized. The target pistol grip is fatter and has a flatter front. Both foreends come with 2 pre-installed swivel studs. To change them from one style to the other, just take out the allen head screws, slide the piece or pieces off and reinstall. The target pistol grip is a 2 piece design and has a seam where the 2 pieces meet, I would have liked it to be one piece so you don't notice the split. On the rear bottom of the stock is also a removable piece that has a swivel stud installed. as of this writing, no other pieces are available as options. To top all of this off, the stock has a quick connect swivel hole on each side slightly behind the pistol grip!

Target Grip

Standard Grip

Target grip behind standard grip

Target grip seam

Target foreend on top, standard below

  Being that the stock is made from laminate hardwoods, it is very stable. Laminate stocks tend to stiffen up the support that the shooter places on the stock. This can help with accuracy. Plus when mounting a bipod, the foreend will not flex as much. I did see slightly better groups when using this stock over the flimsy factory stock. I can consistently shoot under 1 moa with just about any .17hmr ammo. With the factory stock, some ammo would group about 1.5 moa. Because the At-One is laminate, it does weigh more than your factory stock. I actually thought this helped balance out this particular rifle.

Bottom view as received in standard configuration

  I found the At-One to be an excellent choice. It is not a chassis system, but it is about as close as you can get for only $189. My preference was to use the target foreend and the standard pistol grip. When letting my daughter shoot the rifle, it was easy to adjust the length of pull shorter for her. So if your looking for something different in a stock, take a look at the At-One by Boyds. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Adjustable Laminate wood stock

Target Market:

Those wanting a solid adjustable wood stock

FNBs (Features & Benefits of this product):

  • Enhanced Accuracy
  • Laminate Wood
  • Adjustable Butt pad
  • Adjustable Cheek rest (Comb)
  • Quick Attach Sling points
  • Interchangeable Grip
  • Interchangeable Forend w/2 swivel studs
  • 12.5" to 14" Length of pull
  • Weighs 3 lbs

What other aesthetic options or finishes are available?

Coyote, AppleJack, Zombie Hunter, Sky, Pepper, Royal, Royal Jacaranda, BlackJack, Forest, and Nutmeg

What others are saying?:

No ratings found at this time

Link to other reviews:

Soocth00

Price point:

MSRP = $189.00

Retail = $219.99 at OpticsPlanet

I need it now! Availability:

Boyds Gun Stocks

Our Rating:

Pros:

  • Adjustable comb

  • Adjustable length of pull

  • Good stable shooting platform

  • 2 swivel studs (one for bipod)

  • Sling swivel sockets

  • Optional pistol grip and foreend

  • Free floats barrel

Cons:

  • May need bottom metal

  • Target grip is 2 piece design

Score: 8.5 Great

85.jpg

 

Chad’s Favorite Link:  Nevada Cerakote