Patmos Arms Judah 43 slide

  JSD Supply has been selling 80% kits and supplies for some time now. They offer the Patmos Arms’ series of slides, as well as other parts. They kindly sent this complete Patmos Arms Judah 43 slide out to me. The Judah 43 is for a Glock 43 or 43x size pistol. I actually installed it on a SS80 kit from the Glockstore. It proceeded to work great on that little SS80 frame.

  As noted, the Judah 43 is for a Glock 43 sized pistol. This includes the actual G43 and G43x, along with the SS80 and other 80% slimline frames. The Judah 43 comes in 2 configurations, stripped and complete. This review is for the later, as it came with internal slide parts and a match grade barrel. It does not come with sights, though they did install a set of factory plastic sights for me. It uses any standard G43 sights.

  The Judah 43 is a very nice simple slide. It has front and rear cocking serrations. Both of which run perpendicular to the slide. All the exterior edges have large chamfers, so nothing is extremely sharp. The interior and exterior machining are super smooth. Very few, if any machine marks can be seen on the inside, and Zero machine marks can be seen on the outside. Lastly, the Black Nitride coating is top notch and should last a very long time. Even if it were to wear through the Nitride coating, the slide is manufactured from 416 Stainless Steel, so corrosion should never be a problem.

  When the complete Judah slide was received, I realized that the upper parts were not installed in the slide. Not a problem for me, more of a heads up for someone purchasing a Judah slide. The parts not being installed actually worked out better for the review, since I was able to assemble the slide with the parts provided. All the parts fit great and were easily installed. No loose or ill-fitting parts were noticed when the slide was assembled. 

  Being a complete slide, a match grade barrel was also included. The barrel fit tight in the slide, but not so tight that the slide didn’t function properly. The slide also fits nice and snug on the SS80 frame. I'm sure it would have the same fit on other frames as well. I don’t know if it’s the barrel, or the whole pistol/slide combo, but this little pistol build shoots fantastic. I didn’t put it on paper, but on my tiny A-zone steel, it was keeping shots on target out to 15 yards with no problem. 

  I did install a set of XS Minimalist sights onto the Judah 43. As expected, the front sight fit snug without any side to side play. The rear sight had the typical interference fit, so I had to use a sight pusher and a small punch to install it. It’s just another point of reference to the quality of the machining.

  After using this Judah 43 slide for some time, I can say it is great. It does exactly what I want it to do. It’s very accurate. The finish is nice and smooth. There are no sharp edges, except on the slide serrations. But those are not sharp, per say,  just squared off. My only complaint is that it does not come optics ready at this time. The Judah would be a great fit for an 80% build or to turn your Glock 48 into a 43x size pistol.

  So if you are looking for a great slide, check out the Judah series at JSD Supply. It’s a quality slide at a great price. It comes stripped or complete with a match grade barrel and parts. If you're building a G43 type pistol, you can’t go wrong with the Patmos Arms Judah 43 slide, or probably any of the other Judah slides as well.

  

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Complete slide for Glock 43 or 43x

Target Market:

Anyone wanting a slide for their Glock 43 or 43x build

FNBs (Features & Benefits of this product):

  • Stripped or complete options available (Complete slide was given for review)

  • 416 Stainless Steel

  • Nitride coated

  • Front and Rear cocking serrations

  • Match Grade Nitride barrel

  • Complete upper parts kit included

  • Fits Glock 43 and 43X

What other aesthetic options or finishes are available?

None, but also available for other Glock models

What others are saying?:

Nothing found

Link to other reviews:

Nothing substantial 

Price point:

MSRP = $149.99 stripped - $299.99 complete (as tested)

Retail = Same

I need it now! Availability:

JSD Supply

Our Rating:

Pros:

  • Price

  • Top notch machine work

  • Accurate

  • Front slide serrations

  • Nitride Coated Stainless Steel

Cons:

  • No option for red dot sight

  • Comes unassembled 

  • Plain looking

Score: 8.50 Great

85.jpg

Favorite Link:  Atibal Optics