Review

Swampfox Wolverine slide and Justice red dot combo

Written by: Rusty Odom

This review is on the new Swampfox optic Justice 27mm red dot pistol sight and the Steel City Wolverine combo. Let me start by saying I am an average Joe shooter with a huge interest in firearms. I am always looking for the latest greatest item or something to improve on an older firearm to make me a better shooter. For this review I chose a Glock Gen 3 model 22 in .40 S&W to convert to 9mm. The firearm was purchased some years ago for around $295 and it was a local police trade in. I tossed it in the gun safe, knowing one day I’d do something like this to it. 

The Swampfox Justice red dot and Steel City Wolverine slide combo. The slide is in a distressed green pattern and is available for the Glock 19 and 17 Gen 1-3 only. The slide comes with the channel liner already installed and with suppressor height fiber optic sights. They are in the combat configuration (rear sight in front of the optic), the slide is smooth with no machine marks on the outside, except in the area of the optic cutout. The threads on the mounting service were nicely tapped and debured. When mounting the optic it is a nice snug fit. It also comes with 3 sets of screws and Allen keys to mount the optic. The slide has great machining in the front for a good grasp to reload with wet or sweaty hands. It’s texture is just the right combination of aggressiveness, not to be uncomfortable when sharply grasping the gun. It has a lightning cut above the barrel, I assume to reduce weight. I have a concern of dirt or debris getting into it and causing issues in a real world situation. 

The optic is clear and crisp, it has an 27mm window and is made out of 7075 aluminum. There is a Liberty version that has a smaller window of 22mm. These are duty rated and have a new and improved hood over their last model. It has a top load battery that takes the CR1632 battery. Not Chad’s favorite. It weighs 1oz without the battery, its height is 1.04”, length 1.78” and width 1.24”. It has the normal parallax free, fog proof and ruby coated lens. 

It claims to have a greater battery life and new and improved shake a wake motion sensing illumination. The slide and optic are both for the RMR mounting option. Assembly of the slide is straightforward, just like your normal Glock slide would go together. A Brownells Glock completion kit was used for final assembly. 

The initial sight in was done by co-witnessing the dot and the front sight post. Once the impacts were on target I did a ⅓ co-witness, raising the dot above the front sight post to declutter the sight picture. The slide had a few failures to feed, but after some lubrication and some dry fire, it ran flawlessly. The optic is easy to pick up, with some practice, for someone that is new to the red dot game. So far I have fired 350 rounds of 115 grain 9mm with no problems after the initial FTE. I was able to keep all the rounds in the 10 ring at 10 yards. Even with astigmatism the dot was clear with some adjustment of the intensity level. 

In my honest opinion I do believe that this will make a great setup for someone that wants to put an optic on their Glock and doesn’t want to have their slide cut, or wants the benefits of having one frame with two different calibers. After my initial testing and what I know of some of the other optic I own from Swampfox, this appears to be a quality red dot. The slide is nice and clean, the battle worn or distressed coloring gives it some character. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

A quality optic red dot with a standard RMR footprint, with a cost half the price of others. An improved hood to protect the glass, as well as shake awake technology. It claims to be rated for law enforcement and duty use. 

The slide is well textured, nice smooth and rounded corners. Assembly was simple, machining was good. 

Target Market:

People who want to get into the red dot game and not have to have their original slide machines. Also those who have a .40 or .357 Sig that want to convert it to 9mm for cost reasons. 

FNBs (Features & Benefits of this product):

  • Ease of assembly 

  • Clear optic

  • Battery life one year. 

  • Great light intensity of dot 

  • One year warranty 

  • 1500G’s rated

What other aesthetic options or finishes are available?

There is a smaller Liberty optic available. 

The slide as of now comes only in distressed green 

What others are saying?:

So far the only reviews are on the Seampfox instagram page. All the once noted were high reviews including my own.  

Link to other reviews:

None found

Price point:

MSRP -

Wolverine slide $349

Optic $249 to $259

Combo $599

I need it now! Availability:

Swampfox Optics

Our Rating:

Pros:

  • Optic has a good design

  • Improved hood

  • Ruby clear glass

  • Good light intensity 

  • Ease of adjustments of dot

  • Shake a wake feature

  • Slide has great texture 

  • Channel liner already installed 

  • Good machining with limited tool marks

  • Nice tall  fiber optic sights preinstalled 

  • Great customer service 

Cons:

  • Does not have the time on market as other manufacturers so durability is a concern 

  • Lightening cut in the top of slide

Score: 8.50 Great

85.jpg


Sniper Ops Tactical Tripod

The first time I heard about the Sniper Ops Tripod was during a long range shooting class when my spotter brought his.  During the class I had the opportunity to use the tripod and found it worked very well.  Researching the tripod I initially passed due to the price and financial situation at that time.  Upon using other tripods of lesser quality and available funds, it was immediately purchased.  

The tripod has three legs that are each secured with a hex wrench which allows you to control how hard it will be to fold them to the extended position (they are not telescopic). The center of the base contains the rod which the head mount slides on to support the scope.  The head has a twist knob which secures it to the rod (left/right) and a throw lever which is used for up/down movement.  A micro-fine adjuster on the back of the head allows for incremental elevation adjustments.  The scope support can be pivoted 180 degrees to allow for inverted use. 

The scope is attached to the tripod using a twist knob, and once secured, it does not move. There is an optional Collet which the head rides on to make it easier to pan the scope.  Using the collet allows you to loosen the pan knob, move the scope to the new position and then tighten the knob with ease.  Without the collet you will have to hold the head to ensure it does not slip down the rod.  

Using the tripod on a bench or prone, only one rod is required.  If you want to use it standing or seated with the tripod on the floor you will need additional rod extensions.  The rods have a male connection at one end and a female connection at the other so they screw in easily.  At 13” in length four rods should be sufficient to use the tripod in your hunting stand or blind.  The use of more than two rods will make the tripod top heavy, which is why they make a weight that can be screwed into the bottom rod for greater stability..  

If you have a rangefinder an additional head can be used with the primary (scope) head.  This will allow you to set up your scope and rangefinder to move in conjunction to allow ranging your target more easily.  Adapters can also be purchased to attach your cell phone and a Kestrel in addition to leg extensions which will give the tripod a larger footprint.  

The following items are included with the ‘standard’ package:

  • 1 each round shaped, black, STANDARD head mount 

    • Accommodates all scopes and devices with the standard 1/4" X 20 threads 

  • 1 each 3-legged base assembly

    • Legs are non-telescoping

  • 2 each 13- inch rods, 1" diameter

    • 2 joined rods provide about 30" of height 

  • 1 each (NON-MOLLE) padded carrying case (capacity for 5 rods)

  • Inner soft silicone impregnated storage case 

  • 1 each operator’s manual

  • Tough, high quality anodized camouflage

Currently ordering is done by calling or emailing Dave directly.  This proved to be fortuitous as he was able to assist me with selecting the correct scope base as well as accessories, including drilling the head for future use with a rangefinder.  

When I ordered the tripod the following accessories were also purchased:

  • Two additional rods

  • Collet

  • Quick Attach Mount for scope

  • Upgraded (MOLLE) carrying case

  • Drill the head mount to connect a separate mount for a rangefinder

If you are going to purchase any accessory, buy the collet, as that will give you the best use.  The collet makes it very easy to pan the scope. Personally, I think the collet should be included in the package.  

For side by side comparison I used a friend's Manfrotto tripod.  While the Sniper Ops tripod is more expensive it feels more solid and allows the spotter to get the scope lower for use in the prone position.  

Weight of Base, rod and head mount - 3lbs 8.3 oz. Collapsed 12in H X 2.5 in deep (without head mount)Extended the base measures 15in X 17.5in.  

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Well constructed scope mount

Target Market:

Anyone looking  for a scope mount.  

FNBs (Features & Benefits of this product):

  • Solid aluminium construction 

  • Micro adjuster has a range of +5 to -14 degrees.  

  • Works very well when shooting prone or on a bench.

  • Has attachments for accessories. 

  • Small footprint when legs are extended

What other aesthetic options or finishes are available?

Camouflage 

Tactical Tripod Order Page

What others are saying?:

C. Coker

This is a really well made product and I highly recommend it.

Link to other reviews:

Tactical Gun Review

Tactical Gun Review (YouTube)

Price point: 

$379 for the ‘standard’ package

I need it now! Availability:

http://tacticaltripod.com/

Our Rating:

Pros:

  • Well constructed.

  • solid scope mounting. 

  • Quality construction

  • Folds to a compact size

  • Convenient carrying case

  • Made in USA

  • Veteran Owned

Cons:

  • At 3lb, 8.3oz it is Heavy 

  • More expensive than other tripods.

Score: 9.00 Amazing

90.jpg

Tactical Kinetics G17 Threaded Barrel

  Tactical Kinetics, commonly called “The Barrel Guys”, makes rifle and pistol barrels. These barrels are 100 percent made in the USA. I was in need of a Glock 17 threaded barrel, so I asked if they would send one for review. Here we are, G17 barrel in hand, with many rounds down range.

  Since I had previous experience with a Tactical Kinetics’ rifle barrel, I expected the same quality. I was not disappointed. The threaded G17 barrel was beautifully made, inside and out. It came in a Black Nitride finish, giving it a smooth dark finish. Plain stainless steel and titanium nitride (TiN) are also available. This particular barrel was engraved with the “TK” logo on the hood, and the model/caliber (17 - 9x19) on the exterior side of the chamber. Amazing to me, was the ability to get a non-logoed version, with no markings at all for the same price. It made me think, “they are in it for the barrel”, not just to show off. 

  The specifications on this 9mm barrel are pretty standard for replacement barrels. It starts out with pre-hardened 416R stainless steel. Pre-hardening the barrel makes it less susceptible to becoming flawed during the hardening process, thus making a more accurate barrel. It does use a SAAMI spec chamber. The barrel is button rifled with 6 grooves in a 1 in 10 twist ratio. The button rifling lets the shooter shoot every type of bullet, from cast lead to copper jackets. A feature that a polygonal rifled barrel will not let you do. On a side note, the rifling is just beautiful. The 1 in 10 twist rate will let the barrel shoot heavier bullets, better. Bullet weight didn’t seem to matter much, in the way of accuracy, for me. Lastly, it is immaculately threaded the standard ½-28 for compensator or suppressor mounting.

  I installed the barrel in a Freedom Flag Products G17 slide. I proceeded to then install that slide on a Lone Wolf TWF-C frame. Everything fit together great. The barrel had a very good lock up with the slide. Better than a factory Glock barrel, for sure. So, I took it to the range, many times. As expected, it worked like a champ. All different types of ammunition cycled. I don’t remember ever having a failure to feed or extract from this barrel. The polished feed ramp probably helped this, as it is really smooth. 

  What would a barrel review be without some sort of accuracy testing? Probably not a review. So off to the range I went with a handful of different 9mm ammunition types and manufacturers. I measured out 15 yards from the shooting bench, and posted up some targets. I then proceeded to rest the pistol on my shooting bag. I know, not the best rest, but suitable for real world accuracy testing. Here are some of the 5 round groups I shot. They are all good representations of the specific loads tested. My best group was Sig Elite performance 115gr at 1.10”’s.

  • Freedom Munitions Hush 165gr - 2.26”

  • Corbon +P 115gr JHP - 2.18”

  • Federal Champion Brass 115gr - 3.22”

  • Blazer Brass 124gr - 2.21”

  • CCI Lawman 124gr - 1.68”

  • Sig Elite 115gr - 1.80”

  I would have no problem putting the Tactical Kinetics barrel up against other manufacturers barrels. You can’t beat the price at $105 plus $18 for a thread protector. It shoots well, has good lock up, and is completely manufactured in the USA. What more could anyone want in an aftermarket Glock barrel. If you’re in the market for a barrel, go check out the Barrel Guys at Tactical Kinetics.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Glock replacement threaded barrel

Target Market:

Anyone wanting or needing a threaded barrel that fits “Glock” style slides

FNBs (Features & Benefits of this product):

  • Completely made in house by Tactical Kinetics

  • 6 groove Button Rifling

  • 1 in 10 twist ratio

  • SAAMI 9mm chamber

  • 416R Stainless Steel

  • Polished feed ramp (before coating)

  • Target crown

  • Black Nitride coated

  • With or without TK logo

  • Threaded ½-28

What other aesthetic options or finishes are available?

Stainless or TiN

What others are saying?:

Tom at RainierArms.com

Excellent drop in threaded barrel

Machining, fit, and finish are excellent. Drop fit nice and tight in a Swenson slide w/Burris Fastfire cut. Shot 100 rounds each of Rem and Win 115gn, and Armscorp and Browning 147gn, largest group at 25 yds was just larger than my palm. Groups better than my Glock factory barrel. Threading for an Omega 9K was excellent, cycled with no issues. Cleaned up with just a few patches after 400 rounds

Link to other reviews:

None found

Price point:

MSRP = $105.00 and $18 for the thread protector

I need it now! Availability:

Tactical Kinetics or Brownells

Our Rating:

Pros:

  • Less expensive than competitor’s barrels

  • Quality

  • Made completely in house

  • Made in USA

  • Polished feed ramp

  • Black Nitride finish

Cons:

  • Lack of options (fluted, colors, etc)

  • Thread protector is extra

Score: 8.00 Great

80.jpg

Favorite Link:   Gun and Gear Cult

Blackhawk Omnivore

  After recently getting into the pistol red dot world I quickly realized one thing, duty style holsters are slim pickings.  You basically have safariland and that’s it. Or so I thought. Enter the Blackhawk Omnivore! Yes Blackhawk, the same company that makes the (in my opinion) terribly designed serpa. But the omnivore is different, it doesn’t require trigger finger manipulation to deactivate the retention, and the retention mechanism seems to not be subject to locking up with foreign debris. Since my safariland was on 90 days back order and this Blackhawk was shipping immediately. I figured I’d give it a fair shake and put my Blackhawk bias aside. 

  The other very notable feature of this holster is it’s pretty much pistol agnostic. It retains and indexes on the light (or rail attachment if you get the non light bearing model) and Blackhawk claims it fits more than 200 different pistols. This would normally be a huge red flag for me as holsters, in general, should be designed to fit a specific gun. But with holsters like the Phlster floodlight and Armadillo lux being two exceptions, it’s not a deal breaker. I opted for the TLR-1/TLR-2 model. 

  What the TLR-1/TLR-2 version is, it’s better than a serpa, but it’s no safariland. 

  While I’d prefer to judge this holster on its own merits, it’s pretty much impossible to not compare it to it’s only competitor.  

bo3.jpg

  So my first impressions were not good, there were a bunch of plastic pieces and screws that you can/should add into different places and/or mounting platforms. I felt like I had ordered something from Alien gear. Turns out not only do none of these things work, but none are needed at least for my application. There were three different inserts for where the top of the slide meets the holster. I can only assume this is to reduce the play or wobble in the gun. None worked and only made reholstering more difficult. They were held in place by a tiny plastic peg, that I wouldn’t trust, anyhow they are labeled s,m,l. Then there was a piece of plastic labeled “for TLR-1”. Since the instructions/paperwork that came with the holster made no mention of what this was or why to use it, I can only assume you’re supposed to use it if you’re not using the TRL-2. To fill the space where the laser would be.  More on that later. It also came with two different height attachments for the thumb drive release button.   There are two different mounting platforms included, a paddle and a belt slide but with plastic things for adjusting ride height/belt size. The mounting platforms are the two that come with most “concealment” serpas that are plagued with problems, but the belt slide is the better of the two, so I attached it with the screws provided and attached the clips for my belt size. 

  Upon inserting the chosen gun, a g19 with trl-1 and Holosun 507c with irons mounted forward, it clicked into place with only a little play, good news! The thumb drive is way too low so I immediately installed the tallest option with the screws provided. I see no reason to not use the tallest option, as it’s the most intuitive, but not quite as intuitive as the safariland als. 

  I then installed the “tlr-1 adapter” since that was the light I was using. This was the best I could figure, since the instruction manual made no mention of this adapter or how to use it. It clicked into place and seemed semi solid, so I figured I was good to go. On draw strike number two the adapter went flying across the room, “must be operator error” I thought, so I spent a few minutes ensuring I installed it correctly, while looking for YouTube tutorials to help, there were none. As far as I could tell, that was the only way to install the adapter.  So I reinstalled it, spending several minutes making sure there was no other way to put it in and it seemed good, then 6 more draw strokes later, it went flying across the room again. No worries though, the gun is retained just as well(as far as I can tell) without it.  I later reinstalled it two more times and on installation number four it seemed to stay put. No idea what the problem was. 

  The draw is smooth enough, again it’s not a safariland, but it’s plenty fine. I certainly appreciated the natural thumb drive motion. Gun is retained well and the retention mechanism seems to be more than adequate for the “gun grab” situation.

 The mounting platform isn’t very comfortable but it’s not extremely uncomfortable either. All that said, the mounting platforms are extremely flimsy and not something I would trust for serious use. But deep in the “box of bad ideas” I had some Blackhawk duty gear, that included some more robust mounting platforms. As it turns out, that doesn’t matter. Blackhawk uses a different thread pitch for their duty stuff than their concealment stuff, so none of it would work without going to the hardware store and figuring out what thread pitch, length and head size screws I would need, a task I had no interest in doing. 

So I snooped around the interwebs and found a video on this holster from Chuck Presberg. He had run into the same issue and confirmed what I had found about screws and thread pitch. He had mentioned a safariland qls hack, so I looked for this. Turns out it’s fairly easy to modify a qls plate to work with the omnivore for mouthing to safariland attachments, which I prefer anyway. A little dremel and drill work and it was mounted and felt very secure. I should point out I wouldn’t recommend this for duty users since I’m sure the plate is somewhat structurally compromised, but it still feels much more solid than the mounting platforms it came with. 

  I carried the gun in this bastardized setup on both a ubl mid and a flex adapter, the draw and overall carry experience was pretty much on par with the same setups, as with a safariland holster. Again, the draw stroke is only slightly less efficient than safariland, but that could definitely be because of the thousands of repetitions I have from the competitor’s holster, so I can’t knock it. Maybe my initial impressions were wrong, maybe this is a quality holster.

  This is when things took a turn. Several hundred draw strokes in, out came the gun but not the light. The light was still in the holster, held in place by the retention mechanism. Since the holster indexes on the light, not the gun itself, there was nothing holding the gun in the holster. Had I fallen or had someone grabbed the gun, it would have come out freely. Extremely concerned, I tightened the screw on the light as tight as I could without tools (streamlight says not to use tools to tighten the light) and added a whiteness mark, with a paint pen, to keep and eye on this. Hoping this was operator error, I continued the evaluation process, checking the whiteness mark every couple dozen draws. About a week and several hundred draw strokes later, my whiteness mark wasn’t lined up. Sure enough, the screw was loose yet again. The holster seems to be unscrewing the light from the gun. Now the instructions say to line up the slot in a specific orientation, I did that, same issue. I tightened it down as tight as I could get it and no issues drawing but it still would loosen up eventually. This is an issue for me. Now, checking the light screw is part of my daily PMCS. I’ve not had this issue with any other light bearing holster. Is it the end of the world? No, but something to be aware of? Yes

  But wait there’s more! Not long after I started the review process, I got word from a friend that his agency (a large law enforcement agent in Florida) had circulated a memo disallowing the use of the omnivore for uniformed and non uniformed duty use, because of the opening at the trigger guard. According to them, it poses a risk for a negligent discharge because the opening for the light is large enough that it’s possible to depress the trigger of the gun while it’s holstered. A Blackhawk holster that can help facilitate a ND? You should see my shocked face. While this isn’t a new issue with light bearing holsters (there are cases of this happening with safariland) I had to explore this and see if the agency was being overly safe, or if this is a real concern, it’s a real concern. With my gun and my hand/finger size, it is absolutely possible for me to get my index finger inside the holster, inside the trigger guard, and press the trigger while establishing a grip on the holstered gun. Uh oh. It should be worth noting that I can indeed press the trigger while the gun is in some safariland light bearing holsters as well, but not while attempting to establish a grip. It has to be from a different angle and is much more difficult. This is a problem. 

  Overall, if you are an instructor that has a need to use a variety of guns depending on who you’re teaching, or need a range holster for reddot guns this might be an okay option to look at. If you carry a weird gun, that safariland doesn’t offer s rds holster for, this might be your only option. If you have to use a Blackhawk, it’s better than a serpa, but all that said, I’d pass on this holster. And I really wanted to like it. 

Firearms Insider Reviews - 8 Key Points

CLAIM TO FAME:  

Near universal retention holster that is red dot compatible

TARGET MARKET:

People needing a retention holster for use with a red dot and light or for a variety of guns. 

FNBS (FEATURES & BENEFITS OF THIS PRODUCT): 

  • Thumb drive retention

  • Red dot compatible

  • Indexes on the light

  • Fits numerous handguns

  • Thumb activated retention

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE?

TLR-1/ TLR-2, x300u, no light(rail still required) 

What others are saying: 

Denis B

5.0 out of 5 stars

Works perfectly with my Glock G22 and S/W M and P 40.

As a range/competition holster this product works great. It's not suitable for duty carry and it says so right in the instructions. I carried a Blackhawk Serpa Level III for years but none of the ranges I shoot at or companies offering instruction will allow it. This has saved me the trouble and cost of 2 rigs. One holster does it all. Very happy with this product.

Anthony M.

NOT SAFE!!! DO NOT BUY IF LAW ENFORCEMENT

I've had this holster for about 18 months now and it seemed okay, a little wobbly but overall a good fit, as the time passed it became more and more loose and I had to tighten the screws every other day. Well today, I got in a foot pursuit with a dangerous felon and the piece that secures the gun to the holster snapped off causing my gun to fall out. The part that attaches to the picatinny rail detached from the rail and remained locked into the holster. My gun fell out WHILE IN A FOOT PURSUIT!!!!! This could've very well cost me my life. Because of this, I no longer trust this holster or any holster that attaches using the picatinny rail. I will immediately get rid of this holster and purchase a safariland holster.

Price point:

MSRP - $59.99

 I need it now availability:

Blackhawk, Amazon

Our Rating:

Pros

  • Near universal

  • Thumb drive retention

  • Red dot compatible

  • Actually available for purchase without a 90 lead time (Safariland, looking at you) 

Cons:

  • Mounting platform

  • Trigger guard opening

  • Unscrewing the light

  • Slight play 

Score: 5.00 Mediocre

For duty/serious use: 3.00 Awful

50.jpg


Matador Arms "The Regulator"

  Matador Arms has been making various aftermarket firearm parts since 2015. They have made products from an SKS chassis to a folding stock adapter. In the range of accessories they manufacture is “The Regulator.” The Regulator is a fully adjustable muzzle brake available in 4 different calibers. I installed the .223/5.56 one on a 16” AR-15.

  The first noticeable attribute of The Regulator is its length. It is notably longer than what you may be used to. It measures in at 3.6” long. This is partly due to its adjustability. One probably won’t be able to use this in 3 gun competition, due to a 3” muzzle device rule, but that wasn’t a concern to me. The outside diameter comes in just over an inch at 1.08”. This is also partially due to the adjustability of the Regulator.

  The Regulator is essentially a 3 port compensator. Meaning it has 3 large ports on each side, somewhat facing rearward, and 3 holes in the top. The 3 top holes force the muzzle down upon firing. While the 3 side ports help to pull the rifle forward to aid in felt recoil. Of course, the Regulator has the advantage of being adjustable. 

  Yes, I did mention adjustability, and this is where The Regulator shines. With the Regulator, you can adjust the compensation from all the way off (closed) to fully on (open). In between off and on, are roughly 60 different adjustment points. Best of all, no tools are needed to adjust it. Just turn the adjuster nut at the front of the Regulator. Every 1 of the 60 “clicks” is an adjustment toward closed or open. If you are at an indoor range, for instance, you might want to close the Regulator so you don’t blast the shooters next to you. However, if you want the full compensation effect, open the comp all the way up. If you want to tune your specific ammunition to the firearm, start with the Regulator fully open or closed, and start adjusting until you get the desired amount of compensation. I found that with my rifle there was too much compensation when the Regulator was opened up the whole way. I ended up adjusting it 9 clicks away from full open. This gave me zero muzzle rise and a decent reduction in felt recoil. When I used the Regulator fully closed off, it was exactly like shooting a rifle without a muzzle attachment of any sort.  

Full Open

Halfway Open/Closed

Full Closed

  Installation is pretty straight forward. In order to install the Regulator, one must first disassemble the muzzle brake. To do this, unscrew the adjuster knob until it comes off. There may be a little spring pressure on the knob, so be careful. Then slide the outer portion of the Regulator off, and the short spring, leaving behind the inner compensator. Install the inner compensator with the 3 holes facing up. Matador Arms includes a crush washer and shims for the install. The inner comp has wrench flats to aid in properly torquing down the compensator. Then reinstall the outer components and hit the range. The inner compensator would also work as a stand alone brake, but I don’t know why one would want to do this. 

  I tested the Regulator quit a bit. I even measured the muzzle rise, shot times, etcetera with my Mantis X10. I really do like shooting with the Regulator adjusted to my rifle. It definitely reduces muzzle rise to nothing, or even negative muzzle rise if adjusted all the way open. I was able to get faster, accurately placed, follow up shots. From 0.3’s to 0.15-0.20 second split times. I did notice that if adjusting the Regulator between strings of fire, it is hot, so wear a glove, or use some sort of thick cloth. Since the Regulator is adjustable, it will work well on shorter barrels. Shorter barrels usually produce more escaping gases, causing standard muzzle brakes to over compensate. With the Regulator, just adjust the gas output down and this problem is solved. When shooting the Regulator closed, I could definitely notice that it was much quieter to my ear. When fully open, it is loud to the shooter and those near the shooter, but that is just the drawbacks to any compensator. Oh, and sometimes with the Regulator closed, it produces a very large muzzle flash, quite exciting for someone if they aren’t expecting it.

  I can say that I am very impressed with the Regulator. Matador Arms did a great job in designing adjustability into a good 3 chamber compensator. It does everything they told me it would do. Go check out Matador Arms, if nothing else, Canadian gun companies could probably use some of our help right now.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Easily adjustable muzzle brake

Target Market:

Those wanting to tune a muzzle brake or be able to completely close the brake off

FNBs (Features & Benefits of this product):

  • 60+ adjustable settings - full open to full closed

  • No tools needed to adjust

  • Triple chamber brake, when not closed

  • Black Nitride coating

  • 4140 steel

  • 3.6” long

  • 1.08” Outside Diameter

  • 6.8 ounces

  • Shims and Crush washer included

What other aesthetic options or finishes are available?

7.62/308, 9mm, 6.5mm

Link to other reviews:

Alloutdoor.com

Price point:

MSRP = $149.00

I need it now! Availability:

Matador Arms

Our Rating:

Pros:

  • Super Adjustable

  • Reduces recoil and muzzle rise

  • Nitride coated

  • No tools needed for adjustment

Cons:

  • Long

  • Heavy

  • Not legal for most action rifle competitions (3” long x 1”diameter)

Score: 8.50 Great

85.jpg


Favorite Link:   Gun & Gear Cult


Timberwolf TWF-C frame

  Lone Wolf Distributors has released their new Timberwolf “Glock” style small frames. I like to call these Version 2, as they have been completely redesigned. They have large and small frames available. The large frame is the .45/10mm, and the small frame is 9mm/.40/etc. This review is on one of the small frame versions, the TWF-C. 

  Timberwolf frames come in 4 available options. The “TW’ in the part number is, as one would guess, stands for “TimberWolf.” The “F” or “C” stands for full size or compact, either in the frame or the slide. The first “F” or “C” is the slide length you would like to use. I chose the TWF-C, which corresponds to a “full size slide”, so G17 length or longer (think G34), and a “compact” grip frame. This is only a complete frame, so one must supply their own complete slide. Other options are the TWF-F, TWC-F, and TWC-C.

  The new Timberwolf frames come with a lot of options. First off, they are a serialized firearm, not an 80%, so they come fully assembled with Lone Wolf parts. Second, they come with a curved and flat backstrap. Third, it has a removable magwell. Fourth, an undercut trigger guard. Fifth, Gen3 or Gen4 slides can be used. Sixth, they fit in standard Glock holsters. Seventh, an accessory rail on the dust cover.

  Unlike standard style frames, the TWF-C is small. Even though the width is the same, the circumference is way smaller. This is great for smaller handed shooters. For example, my Polymer80 measures at 5-¾” circumference, while the TWF-C measures 5-¼” with the flat, and 5-⅜” with the curved backstrap. I can definitely tell a big difference. In fact I ended up using the curved backstrap because the flat one is too small for my hand. The grip angle on the Timberwolf frame is also more 1911 style, than Glock style. A good thing for me, as the Glock grip angle never worked well for me. 

  For those of you who like larger magazine wells, the Timberwolf has you covered. It comes with a removable magwell adapter. I found it to work decently well for its size. The frame has a lip that the magwell just slides over, then the magwell pins at the rear. The design makes it super easy to take it on and off. I leave mine off, as it interferes with my grip on the pistol. It only covers up about 3/16” of the grip, but it reduced the grip enough for me to notice. When the magwell is off, there is still a lip, at the base of the grip, that sticks out a little. Having the option of a removable magwell, is a pretty slick idea.

  Now that we understand the TWF-C frame, let's get into how it performs. First things first, I chose the TWF-C because I wanted the shorter frame with a G17 slide. Mainly as a carry gun. The Timberwolf did not disappoint. Since it fits in standard glock holsters, it’s easy to find a carry rig. But, I don’t own any actual “Glocks”, so I used a modified Poly80 holster. It carried better than my compact Polymer80, mainly because the grip on the TWF-C is much more rounded. At the range, the Timberwolf performed flawlessly. It just shoots and shoots. I even used two different aftermarket G17 slides on the frame. One was compensated, one was not. Both served the TWF-C frame well. I did feel like the compensated slide was a bit too long for the compact frame, but that could be just me. The trigger supplied is, so to say, blah. It’s essentially a Glock feeling trigger. But, aftermarket Gen 3 triggers will go into the Timberwolf frame. I might want a more textured frame, but the texture is fine, especially for a carry gun. Smooth frames are also available. Other than that, I really like the Timberwolf frame.

  If you're looking for something different in a Glock style pistol, Check out the new Timberwolf frames. Lone Wolf has you covered in the frame option department, with four different ones available. If you have small hands, but want all the options everyone else has, pick up one of these new frames, and feel the difference. Definitely go check out Lone Wolf, for their complete frames and complete slides, you can get a complete TWF-C pistol, if that’s your thing. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Compact pistol frame that takes G17 slides

Target Market:

Those wanting a small length grip frame with a longer length slide

FNBs (Features & Benefits of this product):

  • Gen 3 or Gen 4 compatible

  • Frame comes complete and assembled

  • Flat and Curved Backstraps

  • Removable Magwell

  • Undercut frame

  • Textured or smooth grip

  • Beavertail

  • Light rail

  • Gen 4 style magazine catch

What other aesthetic options or finishes are available?

TWC-C, TWF-F, TWC-F

What others are saying?:

Nothing found

Link to other reviews:

Tactical Outdoorsman on YouTube

Price point:

MSRP = $224.95

I need it now! Availability:

Lone Wolf Distributors

Our Rating:

Pros:

  • Small grip

  • Works with Gen 3 or Gen 4 slides

  • Removable magwell included

  • Backstraps included

  • Undercut trigger guard

  • Comes complete

  • Fits standard G17 holsters

  • Made in USA

Cons:

  • Lip around bottom of grip

  • Magwell makes grip slightly shorter

  • Needs more texture on grip

Score: 8.00 Great

80.jpg

Favorite Link:   Gun & Gear Cult


Combat Flip Flops: The Floperator

I have owned numerous pairs of flip flops, most of which are just plain junk.  The toe thong would dig into the web between my toes, the straps would cut into the top of my feet and they were just uncomfortable.  They were everything from cheap tourist flip flops to the expensive ones purchased at department stores.

A few months ago I purchased a pair of Combat Flip Flops.  When I first tried them I noticed the straps were comfortable and the sole cushioned my feet nicely.  They have been worn during all facets of daily life from the house to running errands.  These were different from any other set of flip flops I have ever owned.  They felt comfortable and fit well.  Most importantly they did not cut into the web between my toes or dig into the top of my feet. The traction was good, especially on wet or slippery surfaces. The velcro patches allow you to add small patches to personalize them.  

The biggest issue was the logo cut into the heel.  This felt uncomfortable the first few times I wore them, however, they felt more comfortable as the logo wore down with use. .

As a side note, they have several charitable endeavors including educating Afghan children and giving women the ability to start their own businesses.  

As stated on Combat Flip Flops’ web site, these are bad for running and worse for fighting, but make a great pair of flip flops.  .

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

High Quality Flip Flop

Target Market:

Anyone who wears flip flops.

FNBs (Features & Benefits of this product):

  • High quality construction

  • Comfortable fit.

  • Good traction on various surfaces

  • Velcro patches on straps.

  • Charitable Endeavors

What other aesthetic options or finishes are available?

Black, Coyote, Shadow

What others are saying?:

Review on the Combat Flip Flop Web Site:

Five Stars  (https://www.combatflipflops.com/collections/mens-flip-flops/products/mens-floperator-shadow)

Sorry it took me so long to find y'all, these are the best Combat Flip Flops EVER! From the comfort to the details from the logo at the bottom the removable patch to the strap around the toes! These sandals are built for anything outdoor and so comfortable to wear indoor and all day! I know what everyone is getting for Christmas keep up the great hard work..

Link to other reviews:

Article from Recoil Web.

Price point:

MSRP = $39.99 (Combat Flip Flops)

I need it now! Availability:

Combat Flip Flops 

Our Rating:

Pros:

  • High quality construction

  • Comfortable fit.

  • Good traction on various surfaces

  • Velcro patches on straps.

  • Veteran Owned

  • Charitable Endeavours

Cons:

  • Logo in heel

  • Hard time running or fighting in them.

Score: 8.00 Great

80.jpg




Lucid Optics "Litl Mo"

  Lucid Optics has released their Micro Red Dot. It is designated the “Litl Mo”. Having used some of Lucid Optics' other products, I was excited to get one for review. Once received, I mounted it up on my slide with an adapter plate. This little red dot is getting to be a favorite for range use and competition.

  Lucid’s Litl Mo has a lot of features packed in it’s small package. It has a 3 MOA dot. A good compromise for either pistol or rifle use. The Litl Mo uses a Venom/Viper/Doctor footprint. This gives it the capability to be used on a lot of different mounts. It is NOT an RMR footprint, which I personally would have liked, and is, in my opinion, the other industry standard. It also includes a picatinny rail mount for even more mounting options. One fantastic feature of the Lucid, is its side battery tray. It uses a CR1632 battery, which just rests in the little tray, and slides in. There are no screws to hold it in, just some friction magic. I could not get the tray to open on its own, and trust me, I tried. This side battery tray allows the user to change the battery without removing the optic, thus leaving your zero alone. The physical size is 45mm Long x 25mm Wide x 30mm high. Of course, the Litl Mo is also shockproof and waterproof.

  There are a few more features of the Litl Mo too. Using it’s 19mm x 28 mm window allows for a great sight picture. This larger sized window really makes the Litl Mo shine. It is so easy to find the red dot. This, of course, allows for fast first shots on target and faster follow up shots. There is a 2 hour auto off on this optic. This would be fine if it had an auto on feature, but it doesn’t. Not to worry, the next generation will not have the auto off. Instead, it will be on, when you turn it on, and off, when you turn it off. Along those lines, the Litl Mo has 8 brightness settings. To turn it on, off, or adjust brightness, just hit either the “+” or “-” button on the left side of the optic. To turn it off, just hold one of the buttons down for around 3 seconds. Because of the auto off function, this optic lends itself to range use only. Which disappoints me, since I would like to use it on a carry gun. The Litl Mo uses a slotted type screw adjustment for windage and elevation, but has no “clicks”. I had no problem zeroing the red dot. Plus, it never lost zero for me.

  Micro red dots are becoming the new normal for handgun sights. I mounted the Litl Mo on a Glockish Polymer 80 build. So the Litl Mo got banged around pretty good. I was just about ready to write my review, and the red dot started having problems. The dot would disappear when the slide went forward. I will say it was after around 1200 rounds. I contacted Lucid, they sent a call tag and a new Litl Mo. Of course, I was the first to have a problem. After they looked at it, it was a battery terminal problem. I was informed that they “tweaked” the design a little to prevent it in the future. Customer service was awesome, so no complaints there. Since this is not a “life on the line” optic, it didn’t bother me too much. I have not had any problems with the replacement Litl Mo. 

  The Lucid Optics Litl Mo is a good micro red dot. I was expecting a little more from a $350 micro red dot. It is built well, has good useability, and good functionality. The lack of staying on, or “waking” up, doesn’t lend itself to the price range it is in. On the plus side, the Litl Mo is a quality built product. 


Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Micro Red dot

Target Market:

Those wanting a quality micro red dot

FNBs (Features & Benefits of this product):

  • 3 MOA dot

  • Side battery tray

  • Uses a CR1632 battery

  • Vortex Venom/Viper, Docter optic mounting footprint

  • Picatinny rail mount included

  • Shockproof up to .458 SOCOM

  • ½ MOA adjustments, no clicks

  • IPX7 waterproof

  • 2 hour auto off - next version will not have this

  • 19mm x 28mm window

  • 8 brightness settings

  • 45mm Length x 25mm Width x 30mm height

  • Weight - 1 ounce

What other aesthetic options or finishes are available?

None

What others are saying?:

Too New - nothing found

Link to other reviews:

Gear-Report

Price point:

MSRP = $349.99

Retail = $289.95 at Primary Arms

I need it now! Availability:

Lucid Optics or Primary Arms

Our Rating:

Pros:

  • Good Window size

  • Side battery tray

  • Dot size

  • Lifetime warranty 

Cons:

  • No shake awake or stay awake mode

  • 2 hr Auto off

  • Not an RMR footprint

  • Price

Score: 6.00 Okay

60.jpg

Favorite Link:   Gun & Gear Cult

Strike Industries Mass Driver Comp

  Strike Industries recently released a compensator for Glock style pistols. It is called the “Mass Driver”. The compensator system is 50 state legal and available for Gen3 or Gen 4 style G19’s and G17’s. The Mass Driver comp I received is for a Gen 3 17. I installed it on a custom Polymer 80 PF940V2 (G17 size) pistol. The Mass Driver system is pretty unique in its application.

  Strike Industries did everyone a favor by offering the Mass Driver comp as 50 state legal. To do this, it does not use a threaded barrel. Instead the Mass Driver uses a special guide rod assembly and springs. I won’t go into installation, but Strike Industries does have a nice video of it. The guide rod assembly is what ties the whole compensator and springs together. It also keeps the compensator from twisting side to side too much. On my particular sample, the Mass Driver rests against the muzzle end of the slide. It does wear the finish a little on the slide where the compensator meets the front edge. The inside of the Mass Driver is beveled, I am assuming this is to square it up with whatever slide you use it with. For instance, I am not using it with a factory Glock slide and it functions and looks just fine. This system also allows for these modifications to not be permanent.

  A unique feature of the Mass Driver comp comes from the dual spring system. Part of the reason the compensator is called the Mass Driver, is because it actually drives the compensator forward under firing. As the bullet exits through the compensator, it “drives” the compensator forward. Then the recoil causes the slide to move backwards. Of course the Mass Driver also has ports to let muzzle gasses escape upwards and sideways, thus helping to reduce even more recoil. Because of the “counter recoil” system, it feels different when shooting the pistol, definitely not a bad thing. It is really hard to explain the recoil impulse. It is less than a non compensated pistol, of course. But it is different then a standard compensated pistol also. For me, it feels really soft, akin to shooting a 22 magnum pistol. The Mass Driver comp really does make the gun shoot more comfortably.

Looking Through Comp

  The Mass Driver comp performed well for me. I had a 30-50% reduction in recoil, according to the Mantis X10. It is a definite reduction in recoil for me. Split times for me were about 0.10 seconds faster with the Mass Driver installed. This data was with 115 grain FMJ’s, so shooting hotter loads may actually help with even more recoil reduction. I did notice that every once in a while, the first shot would not always shoot to point of aim. I am guessing that the Mass Driver comp didn’t seat against the muzzle correctly when hand cycling the pistol. Causing the recoil gases to be expended at a different angle. It wasn’t enough to prevent me from ringing 10” steel plates at 15 yards, but was noticeable on paper. I did run some 124 grain FMJ’s through it also without any problems. In all the rounds through the comp, I have had very few malfunctions. Actually, I have only had 2 failure to eject’s with my least favorite 9mm. There were more when other people shot it, but in my opinion, they didn’t have a good enough grip on the handgun, so not a Mass Driver fault, more of a public service announcement. 

  I do believe that Strike Industries made the Mass Driver comp for post apocalyptic movies. This compensator looks like it should come straight out of a Mad Max movie. It is that sexy. But along with sex appeal, it has function. The Mass Driver is the same width as a standard Glock slide, it does add about 1 ⅝” in length to the pistol. Meaning it does have the ability to fit in most open bottom holsters. I tried it in 3 different open bottom holsters, and it fits in all 3. The comp just sticks out the end. 

  I am really glad that Strike Industries came out with an effective 50 state legal compensator. It really does do everything a compensator should do, at a price that is even far less than some screw on comps. It performed better than I expected for a non-threaded compensator. If you live in one of those not-so-free states, or just want a decent compensator, definitely go give the Mass Driver a look. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

50 state legal Glock compensator

Target Market:

Those wanting a compensator without needing a threaded barrel

FNBs (Features & Benefits of this product):

  • No threaded barrel needed

  • Counter recoil design, as the slide moves back the comp moves forward to reduce felt recoil

  • 50 State Legal

  • CNC machined

  • No permanent modification of weapon required

  • Compatible with most open-bottom holsters

  • 1.675”L  x 1.030” W x 1.430” H

  • All installation hardware included

  • Manganese Phosphate finish

What other aesthetic options or finishes are available?

Gen 4

What others are saying?:

James @ Primary Arms 5/5 stars

AMAZING COMP

This Comp is AMAZING! Works way better than comps that cost twice as much. I have about 700 rounds through it so far and no issues yet. Shoots incredibly flat, and looks awesome. Only issue is that its corners are slightly larger than the glock slide frame, so it makes it a tight fit into and particularly out of holsters where the comp gets pulled forward as you draw the pistol. No functional problem, but slightly annoying

Link to other reviews:

TFB TV

Price point:

MSRP = $89.95

Retail = $79.99 at Primary Arms

I need it now! Availability:

Strike Industries or Primary Arms

Our Rating:

Pros:

  • Recoil reduction

  • Inexpensive

  • Fits in many holsters

  • No permanent modifications to firearm 

  • 50 state legal

Cons:

  • First shot is off

  • Slide wear

Score: 8.00 Great

80.jpg

Favorite Link:   Gun and Gear Cult


Mantis X10 Elite

  Mantis has brought out their top of the line training system, the Mantis X10 Elite. The X10 does all the things the original Mantis X did, and lots more. I reviewed the original Mantis X about one and a half years ago. I was impressed with it. When they offered to send me the X10 for review, I immediately said yes. The new X10 is even more impressive and smaller.

X10 mounted on a rifle handguard. solid green light means X10 is connected and on.

  As most of us know, dry fire training works extremely well to improve shooting skills. The Mantis X10 Elite makes it easy and fun. No more just aiming at a light switch and practicing trigger pull. The X10 will help you understand what you are doing wrong. In my case, the score tells me how much I suck. But touch the red part of the score, and the X10 will tell you what you did wrong, and more importantly, how to fix it! The higher the score, the better you are doing. Or the errors you have are not as noticeable. Part of the fun from the X10 comes with competing against your friends, family, or in groups of people. 

  The Mantis X10 Elite has a plethora of training options and choices. It will work on pistols, rifles, shotguns, and even bows. I’m going to leave out talking about archery, because it is not in my wheelhouse. In all of these firearms, you get all the training options in the app. All of the training drills of the original X have been included. These include: Open Training, Shot timer, Benchmarks, Surprise Break, Primary and Support hand, Reload drills, Cadence drills, plus a new one, Hostage drills. The rifle section even has Slow fire and Rapid fire training at different ranges and positions. Yes, that is a lot and I won’t go over them all. One of my new dry fire favorites is the Hostage taker drill. In this drill, at the buzzer, you draw and then fire at a post-it note (or something). To complete this, you must score an 85 or higher. My other favorite is the Standard open training. Once you “start”, you just dry fire as normal and it scores you and tells you what you are doing wrong. Once you press “stop” it gives you an average score, along with other analysis stuff.

Draw Data

  From my standpoint, the new features on the Mantix X10 are what make it shine. New are Holster draw and Recoilmeter. Of course, holster draw isn’t for the rifle. I use an adapter for the magazine baseplate, this allows me to mount the X10 on the base of a magazine instead of on the handguns rail. Mantis sells adapters for pistols without forward mounted rails also. The draw analysis gives the user plenty of data. The data points it uses are: Grip, Pull, Horizontal, Target, and Shot. See picture marked “Draw Data” for explanations. There is also a movement chart, that shows those different data points in their respective colors. It also overlays all the movement charts, in each session, so you can compare them. The new Recoilmeter is perfect for someone like me. It literally gives me useful data for reviews. It can also work very well if you are tuning a muzzle brake to your specific ammunition or finding which ammunition has the least amount of muzzle rise for your rifle. As one can guess, the Recoilmeter only works with live fire. The data points received from the X10 are: Recovery time, Muzzle rise, Recoil width, and recoil angle.  See picture marked “Recoil Data” for explanations. I did have some trouble with this portion of the app. When rapid firing, the X10 wouldn’t read all of the shots. Somewhere between 30-50% of them wouldn’t record. But on a good note, when I shot slower, all of the data was recorded. For me, the Recoilmeter allows comparisons of different muzzle devices, or lack thereof. Thus giving the readers actual data on muzzle device reviews. These new options for the X10 can really aid in dry and live fire drills.

Recoil Data

  Options for all types of training and firearms are included in the X10 and corresponding app. In the settings, one can choose dry fir, live fire, or CO2 fire. The CO2 option is so that an airsoft or similar training firearm can be used. This then gives the user a better simulation of recoil. Allowing for even better training when sitting at home in your favorite chair. Live fire training with the X10 can help refine what was learned in all the dry fire practice. The X10 can be mounted just about anywhere on a firearm and still work just fine. This is kind of nice, especially if you use it on multiple firearms.

  Just a quick note about the Mantis X10. It’s small. It uses a little flip thing to attach it to a picatinny rail. It has a Micro-USB charging port, comes with a cable, but no light to see when it is charged or charging. But since the charge lasts 20 hours, it doesn’t really matter that much. There is an estimated battery life, with percent, in the app, but it is hard to find in the settings tab.

  What can the Mantis X10 Elite do for you? It can definitely make you a better shooter. It can give you the dry fire training everyone probably needs, and it can be fun. The X10 is really a great training tool for anyone, from the novice to the expert. The new recoil and holster draw components make it shine above the original Mantis X. Go give Mantis a look, I have been extremely happy with their products.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Training aid for Rifles, Shotguns, and Pistols

Target Market:

Those wanting to improve their skills 

FNBs (Features & Benefits of this product):

Dry Fire

  • Live Fire

  • Handgun analysis

  • Rifle analysis

  • Shotgun analysis

  • Archery analysis - requires separate app

  • Training modes/drills

  • Courses

  • Coaching tips

  • History Tracking

  • Groups and Messaging

  • Muzzle trace tracking

  • Trigger control analysis

  • Shot timer

  • Smoothness analytics

  • Consistency comparisons

  • Recoil analysis

  • Holster draw analysis

  • Lever Quick Disconnect

  • Weight - 14 grams

  • Battery Life - 20 hours

What other aesthetic options or finishes are available?

Mantis X2, X3, X7

What others are saying?:

 Mad_Dog on Amazon 4 out of 5 stars

Great training system

This is a must have for the serious self defender and the person worried about trigger control.

The dry fire setting is wonderful. You can practice your dry fire and holster draw with dry fire.

Has other drills in the app (both Apple and Android) too.

Training feedback is through the smartphone. I have a headset that I use at the shooting range that has Bluetooth built in so there is no problem hearing the feedback after each shot.

This system works with dry fire, live fire and CO2. Yes, this system does cost as much as some firearms, but is well worth the money.

Link to other reviews:

Range 365

Price point:

MSRP = $249.99

Retail = $249.99 on Brownells

I need it now! Availability:

Mantis or Brownells

Our Rating:

Pros:

  • Recoil analysis 

  • Holster draw analysis 

  • Small and  lightweight 

  • Fits almost any firearm (comes with shotgun barrel adapters)

  • Great Training aid

  • Free app updates

Cons:

  • Slow to pick up recoil

  • No charging light

  • Price

Score: 8.50 Great

85.jpg

Favorite Link:   Gun And Gear Cult

XS RAM Night Sights

  XS Sights has added another type of night sight to their lineup. These new sights are called RAM sights. RAM stands for Radioactive Material. Since they are Tritium night sights, the name is appropriate. XS offered to send me a set after seeing the F8 sight review, and I eagerly accepted.

  The RAM sights are a semi-standard 3 dot system. I say “semi-standard”, because they are equipped with XS’s Glow Dot Technology. This technology allows the ring around the front sight to glow. I chose the green ring this time, since the F8’s, I reviewed previously, have the orange ring. The front sight ring absorbs ambient light through photoluminescence and then glows. If you shine a bright flashlight on the front sight, it glows really bright for about 10 minutes, and then slowly returns to the normal color. I like the Glow Dot feature, mainly because in some lighting situations, tritium can wash out and you are left with just a standard sighting configuration. The Glow Dot helps me pick up the front sight in those conditions.

Low light, no glow

Glowing front sight after shining flashlight on it. Notice that it glows so bright there is actually a reflection off the slide.

  As with all XS sights, the RAM’s use tritium inserts. The tritium will glow green for years. In fact, XS warranties them for 10 years, not just on the tritium, but also the sights. When I compared these to other tritium sights, they seem to glow just as bright, which is quite bright. The 3 dot sight system has 3 dots, wow, imagine that! Each dot is a tritium vial. Two in the rear sight, one on each side of the notch. Then one in the middle of the front sight. In low light, one just puts the three dots in a horizontal line and the sights are “lined” up. The front sight also has the Glow Dot feature around the tritium dot. The rear is all blacked out except for the tritium dots.

Front sight, immediately after shining light on it. Notice it is so bright that it reflects off of the slide.

Front sight glow, a couple of minutes after shining light on it.

  Besides being “night sights”, the RAM’s make good daylight sights too. The RAM’s use a front sight width of 0.145” and a square rear notch of 0.170”. This gives me a real good, fairly precise, sight picture. When looking down the sights, this combination gives me light on both sides of the front blade, which I really like for more precise shooting. Having that big green dot on the front sight makes it really easy to see and pick up on your target (think fast sight acquisition). It’s almost like having a fiber optic front sight. Let’s just say the daytime sight picture works really good for me. 

  Since the RAM sights sent to me were for a Glock, I installed them on a Freedom Flag products slide. In fact, the slide I used was the same one I had previously mounted XS’s F8 sights on. Installation was straight forward. A front sight tool and threadlocker was provided in the package. The front sight fit snugly, as did the rear. If you don’t think you can install the sights yourself, XS can do it for a small fee.

  In my opinion, the RAM sights are really designed for a carry gun. They are very durable. The front edge of the rear sight is straight up and down. This allows for easier slide manipulation with one hand. The back edge of the rear sight is also angled inward, from top to bottom. This is done to help reduce glare off of the sight. A pretty smart addition. 

  XS sights did a great job with the RAM’s. I am excited that they are bringing out more of the “standard” style of night sights. The only bad thing to be said, is that they don’t offer the RAM’s in a tall version to be used with a mini red dot or suppressor. Go give XS sights a look, their new options are just awesome.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Night Sights 

Target Market:

Those wanting 3 dot night sights on their handgun

FNBs (Features & Benefits of this product):

  • Tritium Powered Front & Rear Sight

  • High-Contrast Color Front Sight - Available in bright orange or green

  • Ember Glow Dot - Photoluminescent dot absorb ambient light and glows in low light

  • Rear Sight Overhang - Reduces rear sight glare in bright light

  • Anti-Reflective Rear Tritium Lens

  • Rear Sight Ledge - Aids in one-handed slide manipulations

  • CNC Steel - Extremely durable for duty use

  • 10 Year Warranty - No Questions Asked Night Sight Warranty

  • 0.145” Front Sight width

  • 0.170 Rear Notch Width

What other aesthetic options or finishes are available?

Orange Front sight

Link to other reviews:

The Firearm Blog

Price point:

MSRP = $109.99

Retail = $99.99 on Amazon

I need it now! Availability:

XS Sights or Amazon

Our Rating:

Pros:

  • Bright Tritium

  • Green Glow Dot

  • Made in USA

  • Easily seen front sight

  • Everything included in package (front sight tool, thread locker)

Cons:

  • No “tall” option

  • Tritium washes out (a fault of all tritium sights)

Score: 8.50 Great

85.jpg

Favorite Link:   Freedom Flag Products

Rescue Essentials ankle kit

There has been rise in the addition of medical equipment to the “EDC lifestyle” and rightly so in my estimation. With more and more folks realizing, as the old cliche goes, they are their own first responder and unintentional trauma being of of the leading causes of death and, according to some sources, the leading cause for people under 45; it seems like a no brainer to carry some equipment to buy some time in the event you or a loved one needs medical attention right now. Things like tourniquets, gauzes, pressure bandages, chest seals and the like are all the rage right now and with proper training can absolutely save a life. 

But how the hell do you carry all that? What with the stuff you already have, which of you’re anything like me includes: gun, knife, flashlight, OC, spare ammo, wallet, keys phone etc. 

On your ankle of course. Enter the rescue essentials ankle medical holster. I will start by saying, I had low expectations for this as it was one of the cheapest ankle rigs I could find on amazon that would meet my basic requirements. I understand that “you get what you pay for” ordinarily. But before I dropped bigger money on an ankle kit I wanted to see if I could even get used to the thing strapped to my leg. I should also point out that the carrier is about the only thing medical related that should ever purchase from amazon. 

About $25 and two days later the ankle pouch arrived. Seems to be made well but more about that later, has one main pouch with a flap and two narrower slots. It also has a small area of molle webbing. So I stuffed it with all the goodies and strapped that sucker to my leg. 

According to rescue essentials, this rig is designed for one tourniquet (either a CAT or SOFTT-W), a 4” izzy bandage, and two pair of gloves. They also claim a SWAT-T and decomp needle can also be accommodated. Not one to be told what to do, I packed it how I saw fit for my lifestyle. While I have switched a few things here and there. I currently load it with (1) CAT gen7 TQ, (1) hyfin vented chest seal, (1) pack of celox gauze, (1) pack NAR compressed gauze, a CPR face shield, two pair of gloves and a small admin flash light. 

After the initial few days it became quite comfortable and now, two years later, I don’t even notice it anymore.  I have very few concealment problems with it, in “tactical” pants it’s a nonissue. In some jeans I have to remove the chest seal, and if you wear cowboy boots on a regular basis you might want to explore other options. It’s not impossible and I’ve done it a few times but it’s a pain.  Obviously, if you’re a shorts or skinny jeans kind of guy/gal this isn’t gonna work either. It is comfortable although I prefer to wear it over socks but will occasionally not. It holds everything in place very well, the only exception to this was the sharpie I tried to carry on it. But ridding on my ankle in the environment and elements that close to the ground, the damn thing is would never write when I needed it to anyway so I ended up not carrying it anymore. I never put a decomp needle in it so that’s the only thing I can’t really speak on, however, for the vast majority of people I don’t think that is a necessity, especially in an on body kit. I do have one in my vehicle kit. But that’s a different article. 

My biggest complaint is the molle webbing (actually PALS because it’s the host not the attachment).  I can’t see adding any molle accessories and it still be the slightest bit concealable. I did attach a few things like a multi tool pouch, a mag pouch, and a handcuff pouch. None proved to be useful. I do keep the small flashlight in the web and did the same with the sharpie. Not the intended use but I do what I want. I would much prefer to see this section replaced with another flapped pouch for another 4” Izzy. This would allow me to carry an additional chest seal and a compression bandage (Like the NAR ankle rig is set up for) the only other complaint I have, which is minor, is I’d like to see a flap to cover the TQ. Not a huge deal but it would protect the “time” strap from fraying as quickly. 

Overall, I think this is a good choice if you’re looking to build a small persona trauma kit and not break the bank. 

FIREARMS INSIDER REVIEWS - 8 KEY POINTS

CLAIM TO FAME:

Low cost ankle medical pouch 

TARGET MARKET:

People looking for a way to add medical gear to their edc without filling their pockets even more 

FNBS (FEATURES & BENEFITS OF THIS PRODUCT: 

  • Lightweight

  • Comfortable

  • Cost effective

  • Elastic storage bands and pouches

  • Customizable to user preferences

  • Main Pouch has a red tab for instant identification

  • Three pockets plus a 2 x 3 PALS ladder

WHAT OTHER AESTHETIC OPTIONS OR FINISHES ARE AVAILABLE? 

Black with a red tab 

What others are saying:

Amazon  - Luis N. B

I’m only 5’1”

Reviewed in the United States on January 24, 2020

I purchased this product because I like being prepared for the worse but I don’t have a lot of space on my belt or vest since I’m smaller than most. This product fits well on my ankle after putting all the products shown on my picture. I carry my tourniquet on my belt so I use one of the pockets for a naloxone and needle decompression. On the big pouch I carry chest seal and quick clot. On the other pocket I carry compressed cause and a space blanket. You can also see I carry an NPA and the medical scissors. One thing to be mindful is not overpacking it If your pants can’t stretch as much. I recommend practicing with whatever uniform you have. Overall, good product.

Price point:

MSRP = $30.00

Retail = $27.49 on Amazon

I need it now availability:

Rescue Essentials or Amazon

Our Rating:

Pros:

  • Works as intended

  • Stays put

  • Comfortable

  • Inexpensive

  • Durable 

Cons:

  • Limited space

  • TQ isn’t covered at the top

 Score: 8.00 Great

80.jpg

Infinity Target with "zones"

  Anyone that shoots, knows about replacing targets. Infinity Targets has come out with a solution for anyone using USPSA/IDPA silhouettes. They are making reusable rubber targets that look like those cardboard humanoid ones. When I first noticed these, I knew I just had to have one. Infinity Targets agreed to send me one.

  Construction of the Infinity Target is recycled rubber. Similar to the “rubber dummy” style, but flat and thinner. The target depth runs about ¾”. They then paint one side white. I was sent the target with “zones”. The zones are cut into the target to resemble the scoring zones on a USPSA target. When I first received the Infinity target, these zone marks were black, but after painting over the target, they are now the same color as the target, but still noticeable.

  The Infinity target came with 2 heavy duty metal clamps. These included clamps are used to clamp the target to a stand. When I say “stand”, I mean the typical 2 piece, 1”X2”, wood uprights, that are typically slid into some type of metal base. The 2 clamps hold the target to the sticks pretty good. The target itself is not light, I’d say it weighs around 10-12 lbs. If the sticks in your target base are loose, the target can seem to lean a little. Another set of clamps will fix this, but I just lived with it because it wasn’t enough to matter. Replacement clamps are pretty cheap, should you choose to shoot one.

  These type of targets are great for practice. Since the Infinity Target has zones, you can see where your hits are. Seeing the hits is helpful if you compete. I even used it to sight in a few pistols. If you get too many holes for your liking, just grab your can of spray paint, and paint over the hits. I will mention that since the target is self healing, the marks it makes in the paint do not look like the nice holes in a paper target. 

  Every range trip, I take the Infinity Target out. The range I use does not allow steel to be shot with rifles any closer than 100yds. It’s for safety, and I understand. By using the Infinity Target, I am able to shoot rifles on the pistol bays. Plus I just paint it when I paint my pistol steel target. I am also able to shoot the Infinity target at very short distances. At muzzle close distances, it doesn’t blow apart like cardboard targets. If you live where it rains a lot, I do, the rubber doesn’t soak up water like paper or cardboard, so you can shoot longer in the rain. The target also works as a nice paper target backer, just staple your paper target to it and go. 

Closeup of 12 gauge slug

Back side of target - slug hole

  I have pretty much shot the Infinity Target with everything I have. As one might expect, hollow points will do more damage to the target. This is because they literally punch a hole out instead of pushing their way through. Infinity Targets says you can use anything up to 12 gauge 00 buck, but no slugs. The smaller calibers like .22lr and .223 hardly do anything to it. 9mm and up seem to actually do more damage to the target itself. Now, I shot 00 buck at about 3 yards, it took a pretty big chunk, out of the back side, of the target, but no visible holes. I did shoot one 12 gauge slug at it, it put a nice size hole in the target (I expected this). After 4 months and probably well over 1000 rounds, it’s still holding up well.

Circles are 00 buck impacts from 3 yards

  If you don’t want the Infinity Target white, just paint it. If you want it to look like a USPSA cardboard target, paint it a brown color. I painted mine grey as it is slightly harder to see. The darker the color, the harder it is to make out where you hit the target. I like this for training because I can’t see the hits and have to just go on training. I did notice that “flat” paints and primers do a better job of covering the target and covering of the bullet holes.

  The Infinity Targets, zone target, is nice. As the saying goes, I would recommend it to a friend. Shipping costs aren’t very cheap because of the size/weight, but sometimes Infinity Target’s has deals on shipping. If you are looking for some sort of usable, reusable, target, definitely go give them a look.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Reusable Torso target

Target Market:

Anyone wanting a reusable target

FNBs (Features & Benefits of this product):

  • Reusable

  • Comes with clamps

  • “Zone” lines

  • Approximately 0.75” thick

  • Self sealing

  • Up to 12 gauge 00 buck ammunition

  • Uses regular target sticks and stands

What other aesthetic options or finishes are available?

No Zone lines, Hostage add on

What others are saying?:

Ben A. at Infinitytargets.com  5/5 stars

Great for close contact drills

I am the training director at diamondback shooting sports in Tucson, Az. These targets are awesome for our close contact drills. Paper targets last all of two rounds from close distance, but these targets hold up great. They seem to take as many rounds as full size rubber dummies but for 1/4 of the price! Would always suggest these targets, and will be ordering some for our sales floor asap!

Link to other reviews:

None found

Price point:

MSRP = $55.00

I need it now! Availability:

Infinity Targets

Our Rating:

Pros:

  • Takes multiple hits

  • Uses standard target stands

  • Paintable

  • Made from recycled rubber

Cons:

  • Heavy-ish

  • Clamps can be shot

Score: 7.50 Good

75.jpg

Favorite Link:   Gun and Gear Cult



,

Atibal SLR-1

,

  I first learned about the Atibal SLR-1 red dot at Triggrcon. To say the least, I was impressed with the prototype I handled. After some time, the production versions were released and they sent one for review. The SLR-1 is 1x20 red dot sight.

  There are a lot of red dots on the market, but only a few are even similar to the Atibal. The Atibal SLR-1 is solar and/or battery powered. The solar works so well that I even ran the red dot without a battery, in overcast weather. Because the SLR-1 is so efficient, it has a combined battery life of over 100,000 hours, that’s over 11 years! Another innovative feature is the removable solar panel, should you break it or something, just order a new one. Much better than ordering a whole new sight. When in the “solar” mode, brightness adjustment is done automatically depending on ambient light. One can switch over to “manual” mode if they want to set the brightness level.

  As with most red dots, the Atibal SLR-1 has a bunch of expected features. The SLR-1 has a 2 moa dot or a 35 moa circle dot reticle. 8 brightness settings, 1 of them is night vision compatible. It’s shockproof, water proof, parallax free, nitrogen filled, and has multi-coated lenses. The battery is easily accessed on the side of the sight, as are the multi-use buttons. Length on the SLR-1 is 3”. Weight is 5.6 ounces. It comes supplied with a very nice AR co-witness mount, but has mount compatibility with Aimpoint T-1 and H-1 mounts

  Now that all the technical stuff is out of the way, let’s dig into some of the good stuff. My SLR-1 came in a nice plastic padded case with everything needed to mount it, zero it, clean it, and cover it, they even threw in an extra battery. I can’t say enough good things about the supplied mount. Most supplied mounts are usable, but not great. The Atibal mount is sturdy, good looking, and mounts very securely. A wrench is even supplied to tighten down the mount.

  Actual use of the SLR-1 is where it shines. The dot and circle dot are very clear. Looking through the 20mm tube, I see little to no color differences. Because the solar panel is mounted on top, it picks up light well. When using the “solar” mode, the brightness of the dot is automatically adjusted. One drawback to the “solar” mode is that you can only use the 2 moa dot reticle, not the 35 moa circle dot. The auto brightness function adjusted brightness extremely well, never did I feel like the dot was too bright or too dim. It is also very responsive to changes in ambient light. To switch over to the “battery” mode, just tap the “+” button and you are now using the battery. Here you have manual brightness adjustments. As you can guess, “+” increases the brightness, and “-” reduces the brightness. The dot does flare when turned up, but that’s pretty normal for any red dot. Since we are on “battery” mode, if you hold down the “-” button for about 3 seconds, the reticle will change over to the 35 moa circle dot. After using the circle dot, I think I prefer a 65 moa dot over the 35 moa dot. Mainly because the bottom of a 65 moa circle is the height over bore zero of an AR at 7 yds. Now if you want to switch back to “solar” mode, just hold down the “+” button for about 3 seconds.

  I’ve been using the SLR-1 for around 4 months. I really like the 2 moa dot and hardly ever use the circle dot. Like mentioned before, it is super clear and easy to find the dot. It has held zero, even with me bouncing it off a wooden bench. It’s light, so it fits in well with the carbine it is on. One design aspect I like is the protected turrets. Yes, it makes it harder to get the caps on and off for adjustment, but protects them from being broken off. Speaking of caps, the turret caps also can be turned over and used to adjust the windage and elevation, both of which are 1 moa adjustments. The actual clicks on the adjustments are pretty good also. There is no problem hearing or feeling them. 

  Atibal did a stand up job designing the SLR-1. It’s clear, tough, and has some of the best battery life in the game. The use of industry standard mounts is smart, as is the multiple reticle option. Plus it has a lifetime warranty. Atibal has been upping their game in the optics industry, definitely give them a look.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Solar Red dot sight

Target Market:

Those wanting a red dot with solar capability

FNBs (Features & Benefits of this product):

  • Solar and battery powered with run times in excess of 100,000 hours

  • Removable solar panel

  • Parallax Free

  • Easy accessible battery (no tools needed)

  • Shockproof

  • Multiple Dot System (MDS)

  • 1 Hour Auto Shut Off when in battery mode

  • Multi-coated lens

  • 2 MOA dot, 35 MOA circle dot

  • 1 MOA click adjustments

  • Brightness - 8 Settings (1 night vision, 7 daylight)

  • Detachable Co-witness mount

  • Lifetime Warranty

  • Nitrogen Filled

  • Water Proof

  • Battery - CR2032

  • Length 3"

  • Weight 5.6 oz

What other aesthetic options or finishes are available?

None

What others are saying?:

Rich F. on Atibal 5/5 stars

Sweet dot!

Competitive 3-gunner, USPSA shooter, steel challenge ringer, and firearms enthusiast. I’ve owned the SLR-1 for almost a half year now. I have almost a thousand rounds with it on my competition shotgun. It's had up to 1,400pfs shells through it throwing 1 3/8 ounce of shot and don’t forget about slugs and buck shot. I can’t wait to run this thing next season in competition. Awesome dot, slim, good looking, love the solar feature and dual reticle. The circle dot setup maybe perfect on the shotgun! I'm proud to own four Atibal optics, and I’d recommend them to anyone. The price and no BS warranty seals the deal on these guys! Great job Atibal, I'm excited to see what other optics you guys come out with. I’d recommend this brand and product to anyone.

Link to other reviews:

Nothing found

Price point:

MSRP = $379.99

Retail = $323.00 at Rainier Arms

I need it now! Availability:

Atibal or Rainier Arms

Our Rating:

Pros:

  • Clear, Crisp Dot

  • Solar

  • Replaceable solar panel

  • Circle dot

  • Industry standard footprint

  • Protected turrets

Cons:

  • 35 MOA circle dot

  • Dot only when using solar

Score: 8.50 Great

85.jpg

Favorite Link:   Gun and Gear Cult

Midway USA Range Backpack

The Midway USA range backpack measures 17in x 15.5in x 9in, has three removable pistol bags and the two main compartments can be combined to form one single compartment by removing the divider between them. The  zippers on the top compartment, main pistol compartment and pistol cases are lockable. There is a shell in the pistol compartment which adds support and can be removed to join the two main compartments together. In front of the top compartment is a smaller pouch for smaller items (cell phone, pens etc.).  The water bottle pouch will hold a 750mL Camelbak bottle easily.  There is plenty of Molle webbing on the back and side to attach accessories.

I used this backpack in classes where the ranges were in a remote location so you had to carry in what you needed.  This backpack easily held what I needed for the range sessions and the padded straps distribute the weight sufficiently to make the backpack comfortable.  

When i was in remote areas with no access to a table the backpack would remain upright and the cover for the pistol compartment makes a nice work area and keeps small items off the ground (so they don’t get lost). The top compartment can store several boxes of ammo or whatever you want to put in there.  The side compartment can easily accommodate ear muffs and a small first aid kit. 

I loaded the three pistol cases with six Glock Mags and a Glock 17 pistol in each and had an issue inserting them into the pistol compartment.  I could get two in easily but to insert the third i had to slide out the first two and then slide the third one in between them and then push them in.

The construction is decent for what i used it for, but is not designed for heavy use.  

All said, this backpack does what it is designed to nicely and is handy for carrying range items to remote areas.  


Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Versatile range backpack

Target Market:

Anyone looking for a range backpack.

FNBs (Features & Benefits of this product):

  • 8 x 10.5 x 8 pistol compartment 

  • Large upper compartment.

  • Top front compartment with additional zipper pocket

  • Side compartment with mesh pouch and zipper pocket

  • Pouch on the side which can hold a 1L bottle

  • Three removable pistol cases which measure 6.5 x 9.5 x 2.25.

  • Two elastic loop target holders

  • Molle on the back and sides

What other aesthetic options or finishes are available?

This only comes in coyote.

What others are saying?:

4.8 out of 5 stars on Amazon.com (based on five reviews) 

4.8 out of 5 stars on MidwayUSA (based on 42 reviews)

Link to other reviews:

Amazon.com

Price point:

Retails for $129.99, but can be occasionally found on sale at Midway USA for $112.99.

Retail = $129.99

I need it now! Availability:

Midway USA or Amazon

Our Rating:

Pros:

  • Versatile range backpack 

  • Three removable pistol cases which can be used 

Cons:

  • Does not seem to have enough space to hold three fully loaded cases.

  • Construction is not for ‘rugged’ use. 

Score: 7.0 Good

70.jpg


SiOnyx Aurora Sport

  Night vision seems to be on everyone's want list. Really, who doesn't want to see in the dark. The cost is usually what keeps most of us from getting into it. Welcome to the SiOnyx Aurora Sport day and night vision camera. We have discussed the Aurora's on the podcast. I now have had actual hands on with the Sport version and co-host Rob has the Aurora Explorer edition. 

  The SiOnyx Aurora Sport, sports a lot of features. It's touted as an action camera. So you get 720p video at 60fps. This allows for okay videos. The actual camera megapixel rating is 0.9MP's. This doesn't allow for great snapshots, but is that really why we're discussing the camera. What really matters is the 3 different camera modes, day, twilight, and night. More on that later. The Sport also has some water resistance to it. It has an IP67 rating: so under 1 meter of water for 30 minutes. It uses a standard micro-sd card that is not included in the Sport version. One rechargeable battery is also included. 

Extreme low light - color, No IR

Extreme low light - black & white, No IR

Extreme low light - green, No IR

  The real question is, how about the "night vision". To start things off, it's not normal night vision. SiOnyx uses a really large sensor in their digital camera. This allows way more light into the camera. By doing this, you get a really good low light camera. Plus it is in color, or way more colors than normal night vision! For all you die hards out there, there's an option for green monochrome or black & white. If it is real dark, you will need some sort of extra illumination, like an infrared flashlight. When using IR, the colors will change slightly, but still essentially color! The IR light is a definite need on cloudy nights. Even with some ambient light, the picture would start to pixelate without IR. 

Low light - Night mode

Low light - Twilight mode

  I proceeded to take some photos with the Aurora. Because of the small camera sensor, the pictures aren't great. For instance, you can tell my dogs are dogs with the night mode turned on. Daylight picture are far better. As far as video goes, it's better than the pictures when in night mode. But it is also far better in daylight. Like I mentioned before, it really needs an InfraRed illuminator for really dark pictures and video. At night, I think it would best be used for target identification.

Battery and SD card access

  Since the Aurora Sport is sold as an all around sporting night vision camera, I had to try it on a rifle. Especially since they show the other Aurora model on a rifle in their advertising. To make things short, the sport flat out sucks on a rifle. When mounting behind an optic (the optic in front of the camera), the parallax is so bad that shot impacts were 3 feet low at 30-50 yards. Rob also had this problem with his Aurora Explorer. This was with a 1-6x scope and a red dot. I then proceeded to mount it in front of a red dot optic. It did at least get rid of the parallax, so shots hit where I was aiming. There was also a problem with this set up. Not enough light was projected on the camera’s sensor, so the night mode worked worse than without an optic. I was going to film, through the red dot, during the day, but the next problem happened. Every time I would shoot the rifle, an AR15 in 223, the battery compartment and eyepiece would unlatch and turn the camera off. This was with the camera mounted toward the front of a handguard. So, if you are looking at mounting this on a rifle, I would highly discourage the Sport model for this. The Explorer edition comes with a picatinny mount that, I am told, keeps the eyepiece from unlatching during recoil.

Candle light - Day mode

Candle Light - Night mode (color)

Candle Light - Night mode (color)

  What would I use the Aurora Sport for? With an IR illuminator it can be used for viewing wildlife at night. Tactical use is pretty much out because the IR light can be seen with any form of night vision, including other Aurora’s. As a sport camera, it would work okay, but the lack of autofocus really kills it in this area too. It does however use the camera industries ¼-20 mounting threads and makes it hook to almost any tripod. The ability to see the picture through an app on your phone or tablet could come in handy, especially if you mounted it to some other radio controlled device.

  The Aurora Sport is an okay nightish vision camera. I would really like to be able to use it on a rifle, but mount it on a helmet with an IR illuminator and have some fun. The price isn’t bad for what you get. SiOnyx keeps improving these camera’s, with a “pro” version out now. Maybe an autofocus is next.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Night Vision Camera

Target Market:

Those wanting some sort of night vision capabilities 

FNBs (Features & Benefits of this product):

  • Water resistant - IP67

  • Color or Mono display

  • 1" optical sensor

  • Lenses - f/1.4 (Night), f/2 (Twilight), f/5.6 (Day) – 16mm

  • 720p video

  • 0.9 MP photos 

  • Wi-Fi and USB connectivity 

  • Micro SD card to 32 MB

  • Micro OLED display

  • Rechargeable battery pack

  • Approximately 8 ounces

  • Approximate size - 4.75” x 2.5” x 2.0”

What other aesthetic options or finishes are available?

Regular Aurora, Aurora Explorer Edition, PRO

What others are saying?:

⅘ stars on Amazon 

A low resolution low light camera - not night vision

  This is a decent low light camera. Sensitivity is primarily achieved by larger pixels and by removing the IR filter which takes full advantage of the spectral sensitivity into IR of modern sensors.

  Here are the negatives: resolution is very low and on a moonless night it really struggles. This is definitely not comparable to gen 3 night vision as the video's on the manufacturer's website suggests. Those are very misleading. This camera / tech is probably more comparable to a Gen 2 night vision device.

  But for the price it does a decent job. The connectivity to smartphones is very useful.

Link to other reviews:

Standard Aurora review

Price point:

MSRP = $399.00

Retail = $399.00 on Amazon

I need it now! Availability:

SiOnyx or Amazon

Our Rating:

Pros:

  • Color Night vision

  • Water resistant

  • Wi-Fi connectivity

  • Lightweight

  • Price

Cons:

  • Needs InfraRed Illuminator

  • Manual focus

  • Adds Parallax

  • Problems when mounting on a firearm

Score: 6.00 Okay

60.jpg

Bravo Concealment Holster (IWB and OWB)

  Bravo Concealment bills their holsters as “the best in everyday concealed carry.”  When they offered to send me a holster to review my expectations were high, however, when I received the IWB holster, at first, I was ambivalent.  

  The holster is constructed from two pieces of Kydex which are joined together by four screws that also hold the belt clips in place.  The following items were in the bag:  

  • IWB Kydex Holster (for Glock 17)

  • Single magazine holder

  • Extra fasteners

  • Two additional belt clips

  The pistol is aligned vertically with the holster shell (i.e. no built in cant) but the belt loops are adjustable for ride height and cant angle.  The belt loops are at an offset angle to allow for better concealment (they call it Torsion Technology). The pistol fit securely in the holster with no slack or rattling.  A loaded magazine was inserted in the pistol and holstered. I tried to shake the pistol loose but was not successful.  

  The holster was comfortable to wear and the pistol could be inserted and removed with ease.  I am overweight and most IWB holsters are uncomfortable, particularly when seated. With this holster I experienced a little discomfort, but not nearly as bad as others.  

  I used this holster for a few months, took it to several training classes and it worked fine.  Drawing was simple and fluid and I could re-holster without sweeping myself (important for use on ranges).  

  In addition an OWB holster was ordered for review (paid for by reviewer).  This holster is larger than the IWB model and pistol is slightly canted forward in the shell.  Similar to the IWB the holster can be adjusted for ride height and cant, although not as much as the IWB holster.   

  This holster was used in a training course without prior testing (a mistake on my part).  The holster held the pistol a little too tight, which resulted in the pistol pulling up the holster when drawing.  This caused me to use my left hand to hold the belt down to aid in drawing. The instructor informed me that I was dangerously close to sweeping my hand, which would result in disqualification, so i changed the holster to the IWB model.  

  When I returned home customer service was contacted.  They asked me a few questions to verify I was using the proper firearm, belt etc.  Once this was established they promptly provided a prepaid shipping label to send the holster back to be repaired.  Once the issue was corrected the holster was returned, at no cost, and the draw was much smoother. This is great customer service. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Kydex IWB holster

Target Market:

Anyone who is looking for holster for their pistol  

FNBs (Features & Benefits of this product):

  • Belt Clips are adjustable for ride height and cant.

  • Currently shipping with a fee magazine holder.

  • Reasonably priced.

  • Available in Left and Right hand holsters

  • Available in Glock, Smith & Wesson, SIG and several 1911 platforms.

What other aesthetic options or finishes are available?

Black

What others are saying?:

63 reviews give it a 4.7 out of 5 stars on Amazon.com 

Link to other reviews:

Amazon.com

Price point:

MSRP = $49.99

Retail = Currently on sale for $44.99 from manufacturer.  

I need it now! Availability:

Bravo Concealment website - $43.39 with extra mag holder

Amazon.com - $39.99 with extra mag holder

Our Rating:

Pros:

  • Currently shipping with magazine holder,

  • Designed for multiple platforms

  • Can accommodate lights.

  • Available for left-hand use.

  • Lightweight

  • Easy to draw from concealment. 

  • Great customer service.

Cons:

  • Not currently making models for FN pistols. 

  • Belt clips do not work with belts > 1.5 inches

  • Only comes in black.

Score:   8.5 Great

85.jpg

Walker Defense NERO 556 muzzle brake

  Walker Defense has come on the market with some truly innovative products. One of those is the NERO 556, a 3D printed hybrid muzzle brake/compensator manufactured from Inconel.. By using state of the art 3D manufacturing, Walker Defense was able to design the NERO without the constraints of normal machining. I had watched one of their videos on the NERO and needed to see if it was really that good, so I reached out to them for a review sample.

  3D manufacturing brings a whole new level to muzzle brakes. Walker Defense uses an additive manufacturing process called DMLS (Direct Metal Laser Sintering). Basically this process uses a laser to melt powdered metal together. By using this process, Walker Defense was able to design a muzzle brake that doesn’t have to use standard machining processes. Instead, they designed it using fluid dynamics for the best possible reduction in muzzle rise and recoil.

nero8.jpg

  The NERO 556 is manufactured using inconel. Inconel is a superalloy known for its resistance to heat, pressure, and corrosion. You may have heard about inconel because some suppressor companies use it for the initial blast baffle. Inconel is not the easiest metal to machine and thus can add a huge cost. By laser sintering the inconel, costs can be kept down some. 

  Walker designed the NERO for zero muzzle rise. It is optimized for a 14.5” or 16” 5.56 (.223) barrel length. If you run it on a shorter barrel, it definitely pushes the muzzle down. I know this because I tried it on a 11.5” and a 7.5”. It does this because the pressure going through the NERO is much larger on the shorter barrels. Walker Defense actually sent me a cutaway diagram (see picture). The diagram helps to understand what is going on with the NERO, and why it looks the way it does. As Walker Defense mentioned:

“It (nero) was designed using fluid dynamics to force the gases to take a different trajectory than the bullet. Upon entering the muzzle device, the vectored flow nozzle (#1) acts as an inverted ramp, and along the dimpled compression ramp (#2), focuses a jet of gas into the curved blast surface (#3) directly below the bore. This focused gas striking the curved blast surface is intended to create a balanced counter-recoil force that directly counteracts the rearward and upward recoil with a downward and forward counter force.”

  Now that we know the technical description, here is my take. The NERO 556 works like nothing else I have ever used before! Like I mentioned earlier, I did try it on a 11.5” and 7.5”, but most of the use was on a 16” barrel. Running the NERO on the 16” did exactly as stated. Recoil was reduced extremely. Most importantly, muzzle rise was effectively eliminated. The recoil impulse almost felt as if it was slightly pulling away from my shoulder. When I tried it on the short barrels, results varied. On the 11.5”, recoil was reduced and the muzzle dipped a little during recoil. On the 7.5”, recoil was reduced also, but more importantly was the huge downward force pushing the muzzle down. I would recommend also running it on a 14.5” or 16”, as it was designed for that. With the shorter barrels, there was also more concussion from the blast. With the 16”, I didn’t really notice it, as it is less than other muzzle brakes I own. While shooting a standard USPSA target, at ranges from 5-25 yards, A-zone hits were really easy. Even when I shot really fast, the muzzle stayed on target and the hits were all on the target. FYI, the AR15 that the NERO resides on weighs in at 6 pounds empty.

  Walker Defense also noted about handling the rifle differently. When shooters use the NERO for the first time, some have a tendency to pull the muzzle down during recoil. With the NERO, this is definitely not needed. Since I was warned about this, I literally shot the rifle with the handguard resting on a flat hand, after first installing the NERO. Yes, it shot very flat with no support. However, I did go back to my standard grip without any problems. 

  I was trying to measure recoil and give a comparison, but the data wasn’t there. I did get a few decent readings on muzzle rise (see attached screenshots). The last one in the group is always off because I moved the rifle after the last round was fired. All of the ones I have are in the standing, off hand, position. The average muzzle rise is near zero. This is consistent with what Walker Defense say about the NERO.

  The NERO 556 may not be for everyone, but it should be. If you are a competitive shooter, you need this. If you just want reduced muzzle climb, you need this. If you want faster follow up shots, this will definitely help. The NERO may seem pricey at first, but after shooting with it, you will probably change your mind. The videos put out by Walker Defense really are how the NERO shoots.

  The NERO is definitely innovative. Just by looking at it, the NERO 556 doesn’t look like your normal compensator/muzzle brake. Well, it isn’t, thanks to the 3D design and sintering. If you want an awesome, recoil and muzzle rise reducing, muzzle brake, look no further than the NERO from Walker Defense Research.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

3D printed muzzle brake with soft recoil and ZERO muzzle rise

Target Market:

Those wanting the best technology in a muzzle brake

FNBs (Features & Benefits of this product):

  • Reduced Recoil

  • Minimal muzzle climb

  • Standard ½-28 thread pitch

  • Use on .223 Remington, 5.56 NATO, .224 Valkyrie

  • Inconel 718

  • PVD coated

  • Pre-drilled hole for pinning and welding on 14.5” barrel

  • Direct Metal Laser Sintered

  • Weight: 3 ⅝ ounces

  • Length: 2.6 inches

  • Individual Serial Numbers

  • Optimized for 14.5”-16” barrels

What other aesthetic options or finishes are available?

NERO 9 and NERO 762

What others are saying?:

5/5 stars  Carl @ Walker Defense Research

Incredible Upgrade

There are lots of ways to spend money on AR-15’s these days... The Nero 556 is one modification that made an immediate, substantial improvement to performance of my AR. Muzzle rise was virtually eliminated allowing for faster and more accurate follow up shots. My buddy’s girlfriend had never shot a rifle and handled it with ease. It is well made and installed easily. I will be buying more!

Link to other reviews:

Jerking the Trigger

Price point:

MSRP = $179.99

I need it now! Availability:

Walker Defense

Our Rating:

Pros:

  • Zero muzzle rise

  • Reduced recoil

  • Faster follow up shots

  • PVD coating

  • 3D printed Inconel 

Cons:

  • Price

Score: 9.00 Amazing

90.jpg

Favorite Link:   Gun & Gear Cult

Meprolight Foresight

  Meprolight has come out with an Augmented holographic style sight. It is called the Foresight. Along with the Foresight, is a downloadable app to work in conjunction with the optic. The Foresight is really unique in how it gives information to the user. When we first talked about it on the Gun & Gear Review podcast, I was so intrigued that I asked for a Test & Evaluation unit.

  This brings us to the actual Foresight, a 1x optic. It is not a small sight, coming in at 4.6” x 2.35” x 2.68”’. Think Eotech size. It does however come with quick mount levers, built into it’s picatinny mount. It also does not have a removable battery. The battery is rechargeable using a USB-C connector. A short USB cord is provided, but not a charger. I just used my phone charger and it worked fine. The viewing window is extremely large at 1.3” x 0.79”. Operational buttons are mounted on the top front of the sight, in front of the window. The whole unit weighs 9.9 ounces.

  Let’s get into the features of the Foresight. It uses a green projected information and sighting display, not your typical red. But that’s not all. In conjunction with the APP, you have a choice of 20 different reticle options! One downside, you can only upload 5 at a time to be used in the sight. That does however give you 5 different sight in the optic itself. All of which are zeroed to the same point of impact. To cycle through the 5 in-sight reticles, just press the left or right arrow on the control pad. 

  Along with the different reticles, other information is also displayed. The Foresight has a built in level displayed on the left side of the screen. The level is 6 lines with a triangle pointer in between. There is another pointer just to the right. When the 2 pointers line up, the sight is level. Otherwise the right pointer moves, up or down, as you tilt the sight left or right. Right moves it down, Left moves it up. The level really helps when sighting in a rifle. I found it useful without being too much in the way. Another feature of the heads up display, is the built in compass. The compass displays in the upper left corner. It reads in degrees from 0 to 359. North is 0, South is 180, etc. 

  When first turning on the Foresight, or cycling buttons, even more information is displayed. This information is only displayed for 3 seconds and then disappears. In this info, is battery capacity, brightness level, and bluetooth. The battery display is in the upper right hand corner. It has both a battery percentage and battery icon. However, it does not tell you how much time is remaining at the current setting. Below the battery indicator is the bluetooth symbol. If you see it, the bluetooth is on, if not, then it is off. The Foresight uses bluetooth to communicate with the app. Last up is the current brightness setting, from 0-9. This is displayed on the right of the window. Brightness is adjusted by using the up/down keys on the control pad. Since we are discussing brightness, the Foresight also has an auto adjust brightness setting. To enter the auto brightness mode, just hold down the up, or front arrow, on the control pad for 3 seconds. The number on the right will disappear when in auto brightness mode. Auto brightness will also turn off if you cycle the sight off and then on again. If all the displayed information is too much, you can put the sight into “low power mode” by pushing the middle button on the control panel. In low power mode, only the reticle is displayed. However, auto brightness does not work in the low power mode.

  Lastly, there is a control menu in the display. Push the center control button twice to access it. Here you can also turn off all the on screen displays, except the reticle. This is also where bluetooth can be turned on or off. You can also calibrate the compass here. Or factory reset the optic. But more importantly, this is where you can adjust the sights zero. Access the “zeroing” option, then you can adjust the zero by moving the sight left or right, displayed as “Y” and “Z” axis. Each number is a movement of 1 MOA. I would have liked finer adjustments, but it is only a 1x optic. You can also adjust zero from the APP.

  The APP has a bunch of different abilities. For the app to work, it must be in range of the Foresight. As mentioned previously, you can zero the optic in the APP also. It pretty much works the same way, select the proper profile, click “Zeroing”, then adjust zero with the arrows. Once done, it will sync with the sight. The APP allows the creation of 10 different profiles. Thes can be different firearms, or different shooters. Each profile has its own individual zero and reticle choices. So if I take the Foresight off of one firearm, install it on another, I can just upload the new profile to the foresight. It will be zeroed and have the 5 chosen reticles for the new firearm. This of course only works if your new firearm profile has been previously zeroed. I love the ability to do this. Especially when installing a .22lr conversion kit. Just bring up the 22lr profile, and it’s zeroed and has the 5 reticles I want for that firearm. In each profile, you can also choose the 5 reticles that you want in the actual Foresight. There are a total of 20 to choose from. Some are courser than others, with the 1 moa dot probably being the finest. 

  Meprolight has impressed me with this sight. It is durable. It may have bounced off of some concrete once or twice. When switching between firearms, it has held zero. At least from what I can tell with a 1x sight. The quick mount thumb levers are a nice touch, especially if you do want to move the sight from firearm to firearm. The sight window is huge and easily picked up. I could live without the compass. But for military applications, it probably can be useful. The angle indicator is pretty awesome, it would really be more useful with a magnifier attached. The Foresight is supposed to have an auto off, shake awake. Either this one doesn’t, or it doesn’t work. It will auto off after hours of non use, but won’t turn on when moved. I tried contacting Meprolight twice, by email, about this, without any luck. I was also curious about stated battery life. So much for tech support. My favorite aspect of the sight is the different reticles. Not just the 20 available, but having 5 options in the sight is amazing. Supposedly a shot counter is in the works. I’d really like to see how that would work.

  I would hold the Meprolight Foresight up against other top tier 1x optics. It would look, function, and be geographically correct on an IWI product. The Foresight worked extremely well for me. If you are interested in an optic like this, definitely look into Foresight.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Holographic Augmented sight with different reticles, level indicator, auto brightness, different zero’s, and an APP

Target Market:

Anyone wanting a feature rich holographic sight

FNBs (Features & Benefits of this product):

Sight:

  • 1x magnification

  • Window size - 33x20mm

  • 4.6″ legth  x 2.35″width  x 2.68″ height

  • 9.9 ounces

  • Quick detach mount built in

  • Holographic sight picture

  • 5 preset reticles

  • Built in compass

  • Built in level indicator

  • Digital Zeroing 

  • USB-C Rechargeable

  • Bluetooth (for App)

  • 10 brightness levels (displayed on screen)

  • Auto Brightness

  • Low Power Mode

APP

  • 20 different reticles (5 transferable to sight at one time)

  • 10 different Weapon profiles and zero’s

  • Zero firearm from app also

  • Choose between sight or app data

What other aesthetic options or finishes are available?

None

What others are saying?:

Nothing found

Link to other reviews:

None found

Price point:

MSRP = $714

Retail = $649 at Midway

I need it now! Availability:

Midway USA

Our Rating:

Pros:

  • Multiple reticles

  • Level indicator

  • Auto Brightness

  • Quick detach mount

  • APP profiles

  • Durability

  • Window size

  • Innovation

Cons:

  • Price

  • Tech Support

  • Shake awake doesn’t work like other manufacturer’s 

Score:  7.5 Good

Sight - 8.5

Tech support - 5.5

75.jpg

Favorite Link:   Gun And Gear Cult

Combat Flip Flops "Sneakers"

 This review is really more about the story, then the shoes. Combat Flip Flops (CFF for short) manufactures flip flops, of course, but also a Hi-top style sneakers. CFF sent my daughter and I some of the hi-tops to try out. They are stylish and comfortable.

  I met Matt Griffin, “Griff” as everyone calls him, at Triggrcon. Griff is one of the co-founders and CEO at CFF. He explained to me a little about what the story is behind the combat flip flops. I had heard some of the story before, but what really interested me was the sneakers they were now making

  The Combat Flip Flop story started in Afghanistan. Griff had joined the Army Rangers to make a difference. After various time spent in war torn nations, he saw people making good with what they had. When standing outside a combat boot factory, in Afghanistan, he came up with the idea of making combat flip flops. What a better way to help these countries, then by having them make products for US markets. Sourcing the materials locally if available. And thus the story began.

  Many of the items sold by CFF help to fund a day of school for an Afghan girl. CFF does this because they understand that female literacy is the key to improving nations. It is real easy for corrupt governments to radicalize children if the can not read. Since women are the teachers of their families in these countries. Teach the girls and then they will teach their families. Illiteracy rates among women, in Afghanistan, is around 15%. Seems like a reasonable idea to me. 

  The shoes are currently made at a factory in Columbia. CFF chose Columbia because of the free trade agreement with the USA. The free trade was put into effect to help pull Columbia out of its Narco state. As many materials as possible, come from the local area. This helps the local economy. Rubber for the shoe sole is made from rubber tree plantations that were once producing cocaine. All aspects of shoe manufacturing is done there. Then they are shipped to the US to be sold.

  CFF sent me a women’s Weekender and men’s MK-19 shoe, both in hi-tops. The MK-19, and the Weekender, are both a canvas material. Think Chuck T’s style. Both use natural rubber soles, but I thing the women’s Weekender’s are grippier than the MK-19’s. The soles are also sewn on and glued, not just glued like other brands. Both have cordura lace security. This means that the nylon laces go through the cordura, keeping the tongue of the shoe in place. Cordura is also used for the pull strap, the one at the rear of your shoe, to help you pull it on. They also use an EVA mid-layer. What is EVA, I asked google: “An EVA midsole, made from ethylene vinyl acetate, helps to disperse weight and provide stability. This foam-like material is lightweight, flexible, and cushions the foot with each step.” 

  I’m not a big flip flop guy, which is why the MK-19’s are perfect for me. They are really comfortable. I did put in an insole, mainly because I needed more arch support. The MK-19’s are pretty flat inside. As of me looking on CFF’s website, the MK-19’s in tiger stripe camo, are not on it, but those are the ones I received. They are all black, with a green and black sole. All the MK-19’s are the same except for looks. When CFF says the shoes are “StickyAF” they are. My feet stick to the floor, no matter what the floor is made of. So far the MK-19’s have held up great.

  My daughter also received a pair of the Weekender’s. These are the female version of the MK-19. Hers are in the Green/Gum color, which is an almost OD green with a brownish sole. The also use a yellow canvas inside. A really nice looking shoe. She gets all kinds of compliments on them. I think the rubber sole on these is even stickier than the MK-19, but I am just going off of pushing them across the table. Griff did informed me that the soles are stickier because they have less color additive in them. Everything else is pretty much similar to the MK-19’s. 

  Here are my daughters thoughts:

  These Weekender’s have an incredible flexibility and fit. The sole molds to your feet and has a relaxed feeling to it. The sole is not too firm and not too soft, and it would be an understatement to say that these are the most comfortable shoes to wear all day. Everything about them is comfy and extremely wearable. The price is affordable and amazing for the quality of these shoes. I am so impressed with these shoes and I wear them almost everyday. They’re stylish and absolutely adorable. I would highly recommend these to anyone who is looking for a casual, but chic shoe, and one that is incredibly worth the price.

  If you are interested in Combat Flip Flops, go check them out. The shoes are awesome, the mission statement is fantastic, and they are helping to do good things. If your interested in the long story of how it all got started, go check out “Steps Ascending: Rise of the Unarmed Forces”. 

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Shoes made in war torn countries to supply girls with education

Target Market:

Those liking the mission statement and needing shoes

FNBs (Features & Benefits of this product):

  • Men's boot/shoe size 7–15

  • Women's sizes 5–11

  • HALF SIZES GO DOWN IN SIZE

  • Proprietary rubber outsole (StickyAF)

  • Proprietary EVA mid-layers

  • Canvas upper

  • Nylon laces

  •  8 eyelets on mens, 7 on womens

  • Cordura lace security

  • Funds 1 day of school for an Afghan girl

  • Combat Flip Flops Lifetime Warranty

What other aesthetic options or finishes are available?

Lots, just go to Combat Flip Flops

What others are saying?:

MK-19:

Great everyday shoe! 

5/5 stars on Combatflipflops.com

The soles are absolutely as grippy as advertised. I wouldn't suggest doing any facing movements wearing these, you'll be crying "corpsman!" in no time. The included insole is better than I thought, I didn't want to strip it out right away like most flat-soled shoes I buy. I probably still will eventually, but it's nice to have a shoe out-of-the-box comfy. The look is styling as all hell, blends great with almost any outfit. Even is reasonably water resistant, though I wouldn't suggest fording a creek or anything.

Only gripe is though while grippy beyond belief, the soles are thin. You feel everything through them. I wouldn't take these truly off-roading or hiking too much - definitely not deliberately. But for my urban commuter lifestyle, they're absolutely perfect.

Weekender

SO CUTE

5/5 stars on Combatflipflops.com

I received these shoes a couple of months ago in size 7 I wear a size 7.5 but they fit perfectly. They are SOOO comfortable and I'm always getting compliments on them. Seriously I could walk for ages.

Price point:

MSRP = $64.99 mens

$59.99 womens

I need it now! Availability:

Combat Flip Flops

Our Rating:

Pros:

  • Great story and mission statement

  • Comfortable

  • Sticky AF

  • Metal shoelace eyelets

  • Sewn on soles

  • Long shoelaces

Cons:

  • No half sizes

  • Color options

Score: 8.00 Great

80.jpg

Favorite Link:  Axelson Tactical

SEARCH