Adaptive Tactical Venom-SE Magazine Conversion

The Adaptive Tactical Venom-SE is a magazine conversion kit for for Mossberg 500 and 590 shotguns in 12 guage.  The complete kit comes with a new forend with the magazine adapter, a pistol grip adjustable stock, and either a 10 round box magazine or a 10 round drum magazine.  Adaptive Tactical sent me the multi-cam kit with the "Wraptor" forend, 10 round magazine, and pistol grip adjustable stock. The offerings from them are available in a variety of patterns. The kit only works with 2 3/4" shells. Because the kit puts the magazine in front of the standard loading gate, it causes the user to have to put their support hand farther out, so some users may have trouble cycling the shotgun completely, especially those of smaller stature.

Installation of the Venom-SE kit wasn't extremely hard. If you know how to disassemble the 500, including the magazine tube, you should be able to complete the install. If not, Adaptive Tactical does offer installation.  After you have made sure the firearm is unloaded, remove the barrel, trigger group, left & right shell stops, bolt carrier, forend, shell lifter, and finally the magazine tube. The kit has decent instructions on this, so don't feel overwhelmed. Since the Venom-SE kit also comes with a new stock, the old one must also be removed. Now it is time to install the magazine tube adapter. To do this, screw the supplied tube into the receiver threads. It most likely will not line up with the magazine tube on the bottom. So one must sand the end of the tube down. This process takes a while, so be patient. After some sanding, try the tube again. Eventually the mag well will be parallel to the sides of the receiver, you are now done with the hardest part. Now it's time to reinstall all the parts with the new ones supplied. The only strange part in the installation is that the left side shell plate is not reinstalled. I tried it with both shell plates installed and the shotgun had problems feeding. When I removed it, the problems went away, so do follow this step. When installing the stock, you must choose one of 2 spacers that go between the receiver and the stock. One has a slot for a sling, and the other does not.

The kit comes with one 10 round magazine, and a 5 round box magazine is also available. Adaptive Tactical also sent a 10 round drum magazine for me to try out, as well. I really liked the 10rd stick magazine as it functioned flawlessly in my tests.  The 10rd drum magazine, however, did not function nearly as well. The shotgun would sometimes fail to pick up a round out of it. At first, I thought maybe it was from me short stroking the slide, but I made a point to push forward and backward on the forend until it stopped, and the drum mag would still not always pick up a round, about 1-2 times every magazine. The drum magazine is shorter than the stick mag and the drum sits out to one side off of center. Because the drum is offset, they made it ambidextrous, which is a very nice feature. To insert the magazines, you must first put the front of the mag in, and then rock it back and up, very much like an AK mag.  To remove the magazine, you must push the magazine release lever behind the mag, and then rock it out, also like an AK.

My favorite part of the kit is the AR-15 style M-4 stock with a built in pistol grip. The stock is adjustable for length, and has built in cups for quick detach sling swivels. The pistol grip was very comfortable and has a storage compartment in it. The base to the storage compartment was extremely hard to get on and off, since Adaptive doesn't mention that it has storage, it makes me think that maybe they know this. On the stock is also one of the most comfortable butt pads I have ever used. It is about and inch thick and really cuts down on felt recoil. Because this is a pistol grip stock on a Mossberg, you can not get to the safety without removing your hand from the pistol grip (the safety is on top of the action.)

The Wraptor forend has 3 picatinny rails mounted on an elevated platform that sits above the barrel. 1 rail on top, and 1 on each side. The forend uses a sight tunnel through the rails. The tunnel is very large and may actually help one to find the front sight or bead quicker. It's kind of like looking through a red dot sight. The rail on the top of the Wraptor forend is too high to put a red dot on (I tried) and is probably best suited for some sort of flashlight. Also on the forend are some threaded holes to use the supplied kelly grip. The grip is basically like a vertical foregrip but attaches to the side of the forend. The kelly grip is stouter than I thought it would be. It worked fine also, but seemed a little awkward. The Wraptor also is designed in such a way that there is a lip on the backside to help from getting your hand pinched when cycling the shotgun.

If you are interested in getting a magazine conversion for your Mossberg, Check out the offerings from Adaptive Tactical. These kits are made from a polymer that is extremely rugged and feels almost like aluminum. They also offer different options than the kit I received. So if you just want the magazine conversion kit with a forend, or maybe just the stock, they have options available.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Magazine Conversion for Mossberg 500 shotguns

Target Market: Shooters wanting easier loading or maybe Heavy class 3-gun shooters

FNBs (Features & Benefits of this product):

• Magazine conversion
• 5 rd box, 10 rd,box or 10 rd drum magazines
• Pistol grip adjustable stock
• Forend with picatinny rails

What other aesthetic options or finishes are available? 

• Black
• Kryptek
• A-TACS
• Multicam
• Desert Digital

Price point: 

MSRP = $339.99 (as received with Wraptor Forend, 10 rd box mag, and stock in multicam)

$299.99 (Wraptor Forend, 10 rd box mag, and stock in black)

$229.99 (Wraptor Forend with 10 rd box magazine)

$199.99 (Standard forend with 5 rd box magazine)

I need it now! Availability: You can readily purchse the Venom-SE magazine conversion directly from Adaptive Tactical.

Our Rating:

Pros:

• Adjustable stock
• Pistol grip
• "Wraptor" forend
• 10 round magazine
• Pattern options
• QD sockets built in
• Ambidextrous drum magazine
• It's now a Magazine fed shotgun!

Cons:

• Installation
• Safety isn't easily reached
• Drum magazine didn't function as good
• Price (though less expensive variants are available)

Score: 7.5 Good

Chad's Favorite Link: U.S. Tactical Supply

Crew Holsters "OL' Classic OWB" Holster

The Crew Custom Holsters OL' Classic OWB is your standard outside the waistband holster.  It is manufactured from some nice heavyweight kydex or similar plastic.  The one I received is for a full size 1911 style pistol.  It arrived in black.  I tried it with 2 different 1911's and it functioned flawlessly.

The design of the holster would make it very useful for everyday carry, IDPA, hunting, or any other thing you might want an outside the waistband holster for.  The belt loops supplied fit my 1.5" belt nicely.  The loops are also kydex, and are very deep, meaning that a really thick belt, or one of the double competition style belts, will fit through the loops.  The loops can also be adjusted up or down on each side.  This way, the holster can be lowered, raised, or adjusted for cant.  Being that it is for a 1911, the inside sheet of kydex came up just to the safety lever.  The outside piece is a little lower to help you get a good grip when drawing.  This model OWB holster also covers the trigger guard completely.  It is also molded around the mag release button so that it can't be hit accidentally.  Some of the owb models have adjustable retention, this one does not.  I didn't find this to be a problem, as the holster retained the firearm nicely.  The draw stroke is also very smooth. Upon reholstering, you do get a good "snap" as the holster locks the gun in place.  I did notice that it took a few draw strokes to break in the holster, as it was very snug when I first received it.

This holster is really nice.  It is available in lots of colors and patterns, for a few extra bucks.  There are also options for weapon mounted lights and lasers.  Various belt clip options are also available, as well as a sweat guard, if one wishes.  The only flaw I found with this particular model was that, with one of my 1911's, the safety would just touch the holster so that the firearm would not go in completely.  I mean by maybe an 1/8".  So I just filed that spot down slightly and it worked great.  I called The Crew Holsters about this and they said I could send it in for them to fix, because it does have a lifetime warranty.  They said they would look at the problem and I doubt that it exists anymore.  If you're in the market for a good kydex style holster, give the Crew a call.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Outside the Waistband holster

Target Market: IDPA, concealed carriers, hunters

FNBs (Features & Benefits of this product):

• Adjustable belt loops
• Available Options
• Full trigger coverage
• Good retention

What other aesthetic options or finishes are available? Lots of different colors, patterns and options.

• OL' Classic holster options
• Firearm model availability

What others are saying?: 

• THE STUTTERIN GUNNER from YouTube
  "I've ordered a few of their iwb holsters and i think i found the last holster company I'm going to deal with, the owner is cool and prices are damn good, and the product is good, speaking of which i need to order a iwb for my sig."

Price point: 

MSRP = $45.00 for black, everything else extra

Retail = $45.00+

I need it now! Availability: The Crew Custom Holsters 

Our Rating: 

Pros:

• Good Retention
• Adjustable Belt loops (height and cant)
• Firearm availability
• Color and pattern options
• Light and Laser options
• Belt loop options
• Adjustable retention on some models
• Completely covers trigger

Cons:

• Safety on 1911 hit edge of holster slightly

Score: 8.5+  Great

Chad's Links:

Handgun Radio

Man O' Steel charity fund raiser multi gun challenge

CRKT Triumph Folder

Everyone should have a good folding knife.  And it seems I am always looking for something that fills that bill.  Well I came across the Columbia River Knife & Tool (CRKT) Triumph non-assisted opening knife.  The Triumph is designed by knife maker Pat Crawford.  It seems that CRKT may be discontinuing the non-assisted version, because they are discounted on their website.  This particular knife may be on the large side for some people, weighing in at 6.3 ounces.  But with some of the features it has, I couldn't wait to try it out. The Triumph is a full featured knife.  Starting with the AUS 8 stainless steel blade.  It is a dual ground Tanto style with a false top edge.  The false top edge and tanto blade design give the knife good puncturing abilities.  You can get the Triumph with or without Veff serrations.  This one has no serrations.  The blade is held out with a single .100" locking liner and the knife also has CRKT's AutoLAWKS safety.  AutoLAWKS is a spring loaded lock that engages once the knife is fully opened.  This feature helps to keep the locking liner in place and supposedly makes it almost as strong as a fixed blade.  When closing the Triumph, one must first move the autolawk out of the way with a finger, and while holding the lock back, push the liner over, and then close the blade slightly.  Once the blade has moved, you can then release the lock and fold the knife in as normal.  It takes a little bit to get use to, but I don't even notice it anymore.

Another nice feature about the Triumph is its G-10 handles.  This handle offers one of the grippiest I have ever used.  Water, mud, and oil don't seem to make it any different either.  When inserting or removing the knife from your pants, it can be difficult because the texture of the grip makes it seem like you wrapped it in sandpaper.  The clip on the knife is removable, but it only has one position.  That position is tip down, so if you like tip up carry look elsewhere for your knife.  The clip is very strong and keeps the Triumph in place throughout the day.

Like I said previously, the knife is large.  Coming in at 5" closed and 8.5" open.  The Tanto style blade is 3.5" long and .14" thick at its spine.  The knife I have has a tiger stripe camo coating on the blade, with black handles.  Different blade designs and handle colors are offered.  CRKT also makes the Triumph in an assisted opening, or a fixed kneck knife.  I have cut many things with this knife and the edge seems to hold up very well and I am pleased with the quality.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Good tactical folder for everyday carry

Target Market: People looking for a good solid EDC knife

FNBs (Features & Benefits of this product)

• AutoLAWKS locking system
• 3.5" Tanto blade
• G-10 grips
• locking liner
• Serrations optional

What other aesthetic options or finishes are available?

• Veff Serrated blade
• Plain Black Blade
• Assisted Opening

What others are saying?

CRKT Delivers

Reviewed by ApolloExx on Sierra Trading Post: 4/5 stars  - The triumph series means business, with its one side bevel, tanto point, and the serrations that are more like hooks then serrations, this knife is intimidating, aggressive, and very attractive. Crawford designs made this knife out of quality parts and materials, each knife is handmade and is all around a balanced, high quality knife. the grip on this knife is also very unique, feeling more like fine sandpaper this knife has a pleasing texture and you wont loose your grip even if you tried. downside of the blade is the effort it takes to sharpen it, with serrations like this it may be a challenge to sharpen but I believe that can easily be worked around,

Michael on CRKT.com  -  I have between 12-15 CRKT knives, and this being my most recent purchace has given me the chance to really get to use this thing quite a bit. In the past 3 weeks I've had my Triumph w/Veff serrations I've put the thing through absolute hell and have only had to sharpen it once completely and one quick time up This things a BEAST and I would HIGHLY RECOMMEND THAT you grab one if you happen to be lucky enough to come across one

Price point 

MSRP = $149.99 ($44.99 discount)

Retail = $99.99 on Amazon for the assisted opening

I need it now! Availability: Readily available on CRKT

Our Rating:

Pros: + G-10 handles - excellent grip + 3.5" Stainless Steel blade + Stays sharp + Strong .14" thick blade + AutoLAWKS Feature

Cons: - G-10 handles can be too course - Overall size at 5" closed and 8.5" open - AutoLAWKS takes some getting use to - Heavy at 6.3 ounces - Non USA made

Score: 7.5 Good

Chad's Favorite Link: Handgun Radio

Allen Company Recon Tactical Backpack

Technically, all backpacks could be considered tactical. After all, tactical means "of or relating to a maneuver or plan of action designed as an expedient toward gaining a desired end or temporary advantage." Having an efficient storage solution that can easily be carried on one's person is a pretty distinct advantage over say, a plastic grocery bag or just your pant pockets. Heck, even a bindle (picture the classic cartoon hobo with a sack tied to a stick) is a human invention that could be considered a distinct advantage for carrying your stuff. What I'm getting at, is when a product is marketed as "tactical" I try to focus on what it does that provides a distinct advantage over the other products in it's category. 

There are plenty of "tactical" backpacks out there, and typically the quality and capacity improves the higher the price point. If you are looking for a dependable bug-out bag or EDC bag that will outlast the zombie apocalypse (heavy sarcasm) then you may be in the $200+ range. There are some of us who are just looking for a fairly inexpensive bag that has expanded useful features, as well as looks cool. After all, the first rule of Tactical is if you aren't looking cool, you are doing it wrong. Or so I've been told! In shopping for an inexpensive tactical backpack that would serve well during day outings or travel, I found the Allen Company Recon Tactical Backpack. For only $25 it seemed like a decent pack that was casual but looked the part. Black: check. MOLLE webbing: check. Hook & Loop panel for the sweet PVC morale patches from Patriot Patch Co.: check!

It has 3 zippered compartments ranging in size. The largest main compartment has a partition sleeve that holds either a laptop or tablet device,  textbook or magazines (the reading kind) or even a hydration bladder, with a covered port in the top where the bladder's drinking tube can come through and then be secured to the strap. Outside of the aforementioned sleeve theres room for loosely putting anything else, a small jacket or several ham sandwiches. There was clearly room to accommodate more pouches, pockets or an interior MOLLE system but Allen left is pretty minimalistic and bare here, which I guess is why it's under thirty bucks.

The second compartment has more to offer as far as utility, and short leashed keyring, admin/paper pocket, and some smaller stitched pockets for pens or smaller items. The third forward most zippered pocket located directly behind the front MOLLE webbing is completely bare, just  big enough for a small book or two magazines (the shooting kind). Once again, pretty bare minimum and really not useful as a range bag, bugout bag, or survival bag.

The exterior has MOLLE webbing on the front, sides, and sling of the pack so you can expand the pack with your own tactical accessories. A dump pouch or admin pouch would go along with the whole traveling student role. You could be "that guy" and put pistol mag pouches on the sling and sides, but it wouldn't earn you many credibility points at the gun show. There is a synch-able net pouch for a water bottle on the wearer's right side, and a slim, narrow zippered pocket on the left that will hold a couple energy bars.

The comfort of the Recon Tactical Backpack is what's the real hero of its price point, as the back panel and the single sling are padded as well as slightly aerated for reducing sweat spots after wearing it all day. It is a single sling design like a messenger bag / backpack hybrid, so if you weigh it down with heavy contents (ie: dozens of manufacturer catalogs from SHOT Show) you will definitely feel it in your left shoulder after awhile. The downside to hybrid single strap bags like this is the inability to switch shoulders to reduce that fatigue if your pack is too heavy. There is a smaller strap with plastic M-buckle  on the right side which snaps into the main shoulder strap to keep the bag from shifting around, and that helps stabilize the load.

In all honesty, I bought this bag from a local gun shop the week before SHOT Show 2015 because I didn't have the time or budget for a more expensive and comprehensive backpack, and I thought a more minimal pack would be useful with all the other camera and recording equipment slung over my shoulder. I quickly found out how overloading the pack with heavy magazines and catalogs lead to pain at the end of a whole day spent on the showroom floor, and I really wished I had anted up for a more conventional double shoulder strap bag with better use of its interior space. If it had better use of internal space with more pockets or pouches on the inside, you wouldn't need to snap on more MOLLE pouches on the outside. Admitting all that, I would still vouch for the Recon Tactical Backpack for a student or just someone on the go looking to travel light but still have some "tactical" features. If you are looking for a full capacity backpack with more features and double straps like a 5.11 pack but more affordable, don't hesitate to check out Allen Company's other tactical backpacks.

Firearms Insider Reviews – 8 Key Points

Claim to Fame: The Recon Tactical Pack is ready for the field, the range, or duty use. The single should sling is nicely padded for comfort, while the interior pockets and exterior MOLLE loops allow for easy organization and the ability to add MOLLE compatible accessories.

Target Market:  Day-trippers, Casual Hikers, Students

FNBs (Features & Benefits of this product):

• 600D cosntruction
• Single, padded shoulder strap
• Exterior MOLLE web system
• Interior organization compartments
• Water bottle pocket, plus hydration bladder sleeve
• Air mesh padded back
• Hook and loop patch for adding name tape or logo patches
• Padded compartment for laptop
• Dimensions: 17.5" x 11" x 7.5"

What other aesthetic options or finishes are available?: Black only

What others are saying?: "The Recon Tactical Pack is ready for the field, the range, or duty use. The single shoulder sling is nicely padded for comfort, while the interior pockets and exterior MOLLE loops allow for easy organization and the ability to add MOLLE compatible accessories." Geekdotcom.com

Price point:

• Retail: $24.99 Amazon

I need it now! Availability: Amazon

Our Rating:

Pros:

• Minimal price, minimal footprint
• Hydration bladder compartment and hole
• MOLLE webbing for expandable capacity
• Stitching holds up for light - medium use
• Strap and back panel are padded and comfortable
• Price Point is low for minimal features

Cons:

• Lack of internal pouches / pockets
• Design limits carry to left shoulder only
• Did not include hydration bladder

Score: 5.5 Mediocre

Featured FFL:

For FFL services I choose Promised Land Firearms in Toulon, IL.

Ryan's Links:

Gun & Gear Review Podcast

Hunter of Design

Crew Holsters "Shadow" IWB Holster

I received the Shadow holster from "The Crew Custom Holsters" some time ago.  The Shadow is a kydex clam shell style inside the waistband (IWB) holster.  I have been wearing the Shadow for a while to try it out.  It is comfortable for a kydex style holster.  The model I received was in black, but they offer lots of different color and pattern options.  They also offer the Shadow for light or laser mounted firearms and tons of different models of firearms.  You can wear it just about anywhere from appendix all the way around to about 5 o'clock.  I typically wear it around the 3:30 position.  It seems to conceal the firearm well, as my children and wife did not notice me wearing it.  One big advantage this holster has over others is that it can be canted frontwards or even backwards.  There are different holes where the clip is located to adjust it to Zero, 15, or 45 degrees.  I tried it in all 3 positions and found that the zero and 15 worked best.  The 45 degree cant seemed strange, but someone may have a use for it.  The fit and finish of the holster are very good. They smooth the edges out and try to eliminate any sharp surfaces.  Mine is for a Kahr CM9 and it fits nicely and, with the adjustable retention, holds the pistol well.  The holster does collapse a small amount when there is no firearm in it.  It didn't seem to collapse enough to make reholstering difficult, but I did notice it.  I usually wear a hybrid style holster, but have found that with this little holster, the single clip makes it ideal to slip on and off easily.  If I need to run to the store at night or something similar, I can just grab this holster and clip it inside my waistband with no problems.  The Shadow is a very nice, convenient holster.  They will also do custom one off holsters if asked.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Convenient IWB holster

Target Market: Concealed carriers

FNBs (Features & Benefits of this product):

• Adjustable cant
• Lifetime warranty
• Single wide clip
• Adjustable retention

What other aesthetic options or finishes are available? Lots of different color and pattern options

• Shadow Holster Options

What others are saying?:

• Aaron X.   5/5stars at The Crew Custom Holsters - Quick and excellent, communication, product and service. I have been recommending The Crew Holster to my friends.

Price point: 

• MSRP = $50 for Black. Colors, patterns, and Lights extra
• Retail = $50

I need it now! Availability: The Crew Custom Holsters.  Some options ship quicker than others, see Available Molds

Our Rating:

Pros:

• Adjustable Retention
• Adjustable cant
• Light options
• Color options
• Easy on/off

Cons:

• Slight holster collapse

Score: 8.5 GREAT

Chad's Favorite Links:  Handgun Radio

ABC House Charity Match June 20th, it really is for the children!

Urban Armor Gear - Folio Scout iPad Air 2 case

 

When looking at a means to protect your technological investment, it is a balancing act. One must find their individual balance between; protection, maintaining the functionality of original device, and style. When I received the Folio from Urban Armor Gear, I was highly impressed with how they balanced the three points. The style is masculine bold yet refined, the increased water resistance and drop protection is great, and you can still access all ports and what few buttons an iPad has with ease.

This case is great and the built in stand utilizes grooves in the screen cover to prop the iPad vs other cases that use a trifold cover or bulkier methods.

The material of the case feels great in the hand, offering no slip durability and a nice cushiony feel.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Protect your technology

Target Market: Smartphone and Tablet Users

FNBs (Features & Benefits of this product):

• Water resistant grip.
• Smartcover.
• MIL-STD drop rating.
• Lightweight.

What other aesthetic options or finishes are available?: Rogue (Red)

What others are saying?: Check out this products Amazon Page to see all the user submitted reviews.

Price Point:

• MSRP = $50
• Retail = $33-$39  on Amazon

I need it now! Availability: Direct from Manufacturer shipping is fast and on Amazon this is a prime eligible item.

Our Rating:

Pros:

• Not overly bulky.
• Allows unimpeded use of iPad’s TouchID.
• Easy access to all ports and buttons.
• Slight increase in overall water resistance.
• Smart cover with secure magnetic strap.
• Lightweight.

Cons:

• The angles the stand provides may not work for all situations

Score: 8.0 Great

My Links:

NJ Gun Blog

Guns of Hollywood Podcast

Tough Hook

  Tough Hook

[embed]https://d2pq0u4uni88oo.cloudfront.net/projects/423963/video-194680-h264_high.mp4[/embed]

A coat hanger… Not that exciting, except this isn’t your normal coat hanger. It’s been designed specifically for plate carrier/body armor. You can use it for other heavy gear, anything that has straps. You could hang ropes up. Or even pull ups with its over 150lbs weight rating.

Much like everything that’s great, it was born out of necessity. An Army veteran came up with the idea for this because all of the alternatives weren’t cutting it. He put his product on kickstarter and raised over $17,000 of his $11,000 goal. Clearly he wasn’t the only one who thought it was a good idea.

After talking to my friend who’s a veteran, it seems the go to for storing body armor is either in a corner on the floor or tape three coat hangers together to hang it up. On top of being over engineered with its tough I-Beam construction, it has flared ends to keep shoulder straps from falling off.

“That’s all cool but what about carrying to my car, or wherever I’m gonna move it to?” you might ask. They’ve got you covered. Instead is having to hold onto the hook with all that weight they’ve integrated a handle on the underside of the hanger. And because of that, it's usefulness doesn't end at the closet. You can use it to carry your gear to the car, range, work, or wherever you think you want it at. All you have to do is spin the hanger inside the vest and you have a nice, wide grip to carry it with. It’s just like carrying a briefcase, except it contains SAPI plates instead of documents.

The only thing I wished this had was an accessory hook. As it is, you’d just have to put your ears or gloves on your vest or in a dump pouch.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Holding/transporting plate carrier/body armor.

Target Market: Military, LEOs, home defense, anyone who owns plate carrier/body armor

FNBs (Features 'N' Benefits):

• Comes in a variety of colors to match your plate carrier
• Built in carry handle
• Made in the USA

What other aesthetic options or finishes are available?:

• Black
• Tan
• Green

What others are saying?: 

• “Best solution I have found to hang heavy equipment.” - ChrisH, amazon.com

Price point:

• MSRP -  $14.99 on their site
• Retail - $14.99 on amazon.com or (FRN Referral Link)

I need it now! Availability:  Amazon is the best bet because you can get free shipping with Prime.

Our Rating:

Pros + Our Rating + Handle for carrying + Wide to prevent strap deformation + Tough as H*** + Inexpensive + Army veteran created + Made in America + Lifetime Warranty

Cons - No accessory hooks/attachment points - Very Specific application

Score: 9.0 Amazing 

Bushnell AR 3-12x40 Scope

I purchased the Bushnell AR scope because I needed an optic for local 3-gun matches and varmint hunting. The scope had everything I was looking for at a very inexpensive price. I opted to purchase a Bushnell because I have not had any problems with any products that I have used from them. This includes some of their low end scopes and some higher end ones.

The scope was mounted on my AR in a Warne RAMP mount and it fit perfectly. Once sighted in,  I tried out the BDC reticle with some 55gr ammo. I was only able to try the drop compensators at 200 and 300yds, but they seemed to be accurate enough. The BDC is calibrated for your standard 55gr ammunition, but should also work adequately with 62gr ammo. The BDC reticle is to be zeroed at 100yds and then has dots for 200, 300, 400, & 500 yard drops. The 600 drop mark is where the line gets wider (think duplex reticle). I would have liked it better if Bushnell had put a dot at 600. I use heavier bullets and just plugged them into a ballistic program so that I know what the drops actually are in comparison.

This scope has some nice features. For one, it has resettable target turrets. Once sighted in, you can take the supplied allen wrench, loosen up the screw on the top of the turret, pull the knob up and turn to zero, and push it back down, then tighten up the allen screw. The AR series scopes also have a side parallax adjustment,  which is very nice when adjustment is needed while looking through the scope. I found the scope to be very clear for the price, especially at the lower settings. After adjusting past about 11x it gets a tiny bit blurry around the edges. The eye relief must be more precise at the higher magnification also. The reticle is calibrated at the highest (12x) magnification also, but I didn't have any problems seeing any targets at this magnification.

Now for the things I didn't like about this scope. It is heavy, weighing in at more than 21 ounces. It is definitely noticeable when mounted. The target turret clicks are a little bit mushy. But I really didn't expect any more at this price point. The scope is also long at 12". Not unmanageable, but it could be shorter. The other notable dislike is the small blurriness around the edge at higher magnifications.

Even with the flaws mentioned above, I do like this scope. It has the right features at an excellent price. It can be used with both eyes open down at 3x and can magnify smaller targets at the 12x setting. If you're not concerned about weight, this could be a good scope for your next AR.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Inexpensive Tactical scope for AR style rifles in .223(5.56)

Target Market: Those looking for a decent inexpensive optic with some higher priced features

FNBs:

• Drop Zone 223 BDC reticle
• Side parallax adjustment
• Reset to zero adjustable target style turrets
• Second focal plane
• Fully multi-coated optics
• Finish: Matte Black
• 1" tube diameter
• Length (in / mm): 12 / 305
• Drop Zone-223 BDC Reticle
• Field of View (ft@100 yds. / m@100 m): 33/8.5@3x / 11/2.5@12x
• Adj Range in@100yds/ m@100m: +50 / 1.3
• Weight (oz. / g): 21.3 / 604
• Exit Pupil (mm): 13.7@3x / 3.7@12x
• Eye Relief (in / mm): 3.7 / 95
• Click Value in@100 yds / mm@100m: 0.25 / 6.95
• Power / Obj Lens: 3-12x 40mm

What other aesthetic options or finishes are available? None, Comes in Matte Black only.

What others are saying?:

Bryan on Amazon: 4 out of 5 stars

Pretty good scope: Install and zeroing were pretty easy. I bought this and the Millett 1 piece mount sold as a combo here on Amazon. The mount allowed forward offset to improve eye relief on my flat top AR. Eye relief (real world) is around 4 inches. The eyepiece is large and the optics art crisp. Both eyes open works great. Not as crisp as the Nikon I have in the same price range but acceptable. There is both a focus and a parallax adjustment to make sure you get the cross-hairs in sharp focus which is nice. The turrets are a little mushy and don't give good tactile feedback but are acceptable. The zoom has no stops which I don't really like and it's pretty high effort which may be the price for a weather seal on this scope. Adjust zoom requires a firm grip on rifle because even with bipod, you need good leverage to change it. So far, it has held a crisp zero through 40 shots and the MOA system is nice for no shoot ranging. This is a good varmint scope IMHO. If it stays as good as it has been while new, I will be very happy.

CavScoutDM on Brownells: 5 out of 5 stars

Great scope @ Unbelievable price: I mounted this scope on my just finished 24" Long Range AR15 and I couldn't be happier. Repeatable, clear, and the BDC works great with just a little practice. Bushnell hit a home run with this one, I just wish I'd seen the 18X as I would have bought it instead of the 12X. No matter though as I said before they knocked it out of the park with this one!

Price point:

• MSRP = $259.95
• Retail = $165.61 on Amazon
• Retail = $179.99 at Brownells

I need it now! Availability: Amazon, Brownells, or your local gun shop.

Our Rating:

Pros:

• Side parallax adjustment
• Target style turrets
• Reset to zero turrets
• Good glass clarity at most magnifications

Cons:

• Heavy
• Long length
• Semi-mushy turret clicks
• Not super clear at 12x

Score: 7.5 Good

Chad's favorite link: AR15 Podcast 

Hi-Point JCP .40 S&W Pistol

The Hi-Point JCP .40 Smith&Wesson is a big, heavy, inexpensive pistol that makes Glocks look attractive. It is a 100% American made, polymer framed, striker fired, blowback operated semiautomatic pistol. Most blowback pistols are .380 caliber or smaller because as the power of the cartridge increases the size/mass of the slide must increase also. The slide on the JCP is big and heavy so it can contain the power of the .40 S&W round. The fixed barrel of a blowback operated pistol, like the Hi-Point, makes it inherently accurate. I was able to shoot hand size groups at 100 yards using randomly reloaded ammo that had at least three different manufacturers' headstamps. I was able to do this multiple times and did it twice on video, I posted one of those on YouTube.

You Tube Video

The Hi-Point JCP comes in a cardboard box with one 10 round magazine. The pistol seems simple, at first glance, but then you start to notice it has features that you wouldn't expect on sub-$200 pistol. It comes with a trigger lock, sight adjustment tool/key, chamber flag and an extra peep sight for the pistol. There are deep rear slide serrations, a cutout near the breech that serves as a loaded chamber indicator, a magazine disconnect safety, and the rear sight is adjustable for elevation and windage. It also has a proprietary accessory rail, but they do sell a picatinny adapter on their website. The front sight on the JCP is fixed with a painted yellow dot, while the rear sight has two painted and recessed red dots. It has a frame mounted safety on the left side, along with a standard magazine release button behind the trigger guard. All Hi-Point pistols come with a lifetime warranty. If you are the first owner or the fifth owner it doesn't matter it's under warranty. Many people would assume at this price point the JCP would be limited to standard powered ammunition, but they would be wrong, as it is rated to handle +P ammunition.

I purchased a Hi-Point JCP in .40 Smith&Wesson, initially as a range gun, in 2012. I could have purchased other pistols, but I had read enough positive reviews by people that owned Hi-Points to silence the negative comments from people that have never shot, held or owned one of these pistols. After firing nearly 3,000 rounds through the pistol, I feel I have enough information to give an informed review. I have used this as a range gun, used it to teach firearms classes, take firearms courses and even took the NRA Off-Duty Law Enforcement course! I have seen way more good than bad with this pistol and can say that it's a great buy, for the money. The pistol is a shooter but, sadly, some magazines may need to be tweaked to feed properly. My mags were causing the rounds to nose dive in the magazine. I have six magazines and I had to slightly bend the feed lips outward on all six with a multitool. After that, I have had no feeding problems in firing more than 2,500 rounds. I have cleaned the pistol three times, once out of the box, at 500 rounds and again before I took photos for this review. With about 2,000 rounds between cleanings, I have found no detriment in performance. I have shot full metal jacket ammo only through my pistol because it is a range gun for me. I have used reloads, steel, brass, and aluminum cased ammo from Tula, Lawman, Federal, Winchester and anyone else that had range ammo that I could find on sale. I have had no problems with any of it feeding or firing.

Taking it apart requires a 3/32” roll pin punch to remove the slide retainer pin. The directions say to use a pin punch, my suggestion is to use a ROLL pin punch instead. The roll pin punch will easily center on the slide retainer pin and not damage the pin itself unlike a regular pin punch. The take down is easy enough but a pin punch and a hammer are needed to remove that one pin. The JCP is a duty sized pistol with a 4.5 inch barrel, a eight inch over all length and a 38 ounce weight empty. The Hi-Point JCP is a big, heavy and bulky pistol that weighs more empty than a Glock 22 weighs loaded! I thought that I would have trouble finding a holster for my Hi-Point but I didn't have any trouble at all. Alien Gear, Galco and Tagua all make holster for this pistol, and I am sure there are more holster makers that produce factory holsters for Hi-Points. With the many Kydex custom holster makers around I am sure a custom holster can be made.

Iberaxtras.com is where you are directed for parts for JCP pistols. They allow Hi-Point JCP owners to get four free replacement parts for their Hi-Point pistol shipped to them free of charge! All that is needed is your information and your pistols serial number, everything but the frame is available for free. It is a great range gun, duty gun, home defense gun, truck gun, gun for your tackle box or a spare firearm to hand out to trusted family or friends that need one in an emergency. With its warranty, tough powder coat finish, reliability, accuracy and low price, you can't go wrong.

Firearms Insider Reviews 8 Key Points

Claim to Fame: A quality budget friendly pistol with a MSRP under $200 also one of the most maligned handguns on the internet.

Target Market: Anyone that wants a solid budget priced pistol.

FNBs (Features & Benefits of this product):

• Lifetime warranty
• Four free replacement parts with free shipping on those parts.
• Fully adjustable rear sight
• Trigger lock
• Chamber flag
• Sight Adjustment tool
• $15 factory magazines
• +P ammo rated

What other aesthetic options or finishes are available: Black or green powder coat finish

What are others saying: “I think it would be fair to say that if you were in the market for a eminently affordable handgun that was capable of firing authoritative cartridges for home defense or informal plinking, a Hi-Point pistol may just fill the bill.” - Paul Scarlotta- Shooting Times

Price Point:

MSRP: $199 Retail: $164.80

I need it now! Availability: Buds Gun Shop has them in stock.

Our rating:

Pros:

• very budget friendly price
• four free replacement parts with free shipping of those parts
• lifetime warranty
• great customer service

Cons:

• magazines may need to be tweaked to feed correctly
• proprietary accessory rail

SCORE: 7.5 Good

Simon Says Train Facebook 

Simon Says Train YouTube

RTK Sweet Pea trigger for Ruger LCP

As many Ruger LCP owners may know, the trigger is probably the worst part of the firearm. RTK has improved this feature with its Sweet Pea trigger for the LCP. Having owned and shot my LCP for awhile now, I can appreciate this upgrade. When firing the firearm, my finger would get pinched by the trigger. The sharp recoil of the little .380 didn't help this any. After installing the Sweet Pea trigger I realized that the trigger bite had gone away. This is something that RTK says comes from the pivot point to trigger face relationship. The installation on the trigger can be a little overwhelming for some, but if you have some mechanical aptitude and some tools it can be done with ease. The online instructions from RTK are excellent! Here is a link to the trigger instruction: Sweet Pea Installation. They have pictures and descriptions to walk you step by step through the installation. Basically, if you can detail strip the pistol, you can install this trigger. I would recommend having a small dish to put the parts in. The only problem I ran into was getting the trigger block positioned correctly. It took me three tries, but that really only added about 5 minutes extra. The trigger kit also comes with a new stainless trigger pin. After installation the trigger needs to be adjusted. To do this you will need a .050" allen wrench or driver, one with a ball head would be even better. My trigger over-travel screw was turned too far in, and needed to be backed out a few turns to get the pistol to fire. It then would not reset completely so I needed to back out the pre-travel screw.  After adjusting the travel screws, the instructions say to back the screws out 2 turns and then put some thread locker on them, and screw them back in 2 turns. I found this to be time consuming due to the fact that the screws are not the easiest to get to. The only real negative that I had about the trigger is that it did not include a wrench for adjustment and getting to the set screws for adjustment is awkward.

I like the trigger okay. It does make the trigger pull feel smoother. And since it is adjustable, it makes the overall trigger travel shorter. A big plus. The width of the trigger also gives it a better feel to me. It is not a match grade trigger, nor should it be. But it is better than the factory Ruger trigger. However, I do believe there could be more room for improvement. RTK also offers a variety of triggers for other small semi-auto pistols.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Improved trigger for Ruger LCP

Target Market: Ruger LCP owners, Concealed carriers

FNBs (Features & Benefits of this product):

• Adjustable (Both Pre-Travel and Over-Travel)
• Looks good
• Available in different colors
• Trigger feel is improved
• Changed trigger pivot point (to help with trigger bite)

What other aesthetic options or finishes are available?:

• Black
• Red
• Hot Pink
• Grey
• Brite (Black w/polished sides)
• Milled (Raw aluminum)

RTK Trigger colors

Price point: 

• MSRP = $50.00 from RTK
• Retail = $45.00 from Galloway Precision

I need it now! Availability: RTK or Galloway Precision

Our Rating: 

Pros:

• Better Feel
• Pre-Travel Adjustment
• Over-Travel Adjustment
• Better Trigger Geometry
• Color Choices
• Very good online installation instructions
• New Trigger Pin Included

Cons:

• No supplied Allen wrench for adjustment
• Must go online for instructions
• Adjustment of the trigger is somewhat awkward

Score: 8.0 Great

Chad's Favorite Link: ABC House Shooting Match

TangoDown Battle Grip

The TangoDown Battlegrip is an AR-15 grip made by, you guessed it, Tango Down. The grip is more ergonomic than the standard A2 grip. Plus, it has a nice storage space inside. This storage is primarily designed for extra batteries, but one could put numerous other items in it. The storage compartment comes with some sort of foam inserts to keep the batteries from rattling around. At the base of the grip is an attached rubber plug. The Battlegrip also comes with a stainless steel grip screw. When using the supplied grip screw, and using the base plug, the handle is water tight. The grip also has a nice stippling effect on it to help prevent slipping. Last on the list of features is a tang that protrudes out in front, this tang covers the gap between the grip and the trigger guard. The grip is available in 3 colors: Black, Foliage green, and Flat dark earth.

I have used this grip for a long time, and it has held up well. It has a different grip angle then some other AR-15 grips, and so I  would recommend trying one out on a rifle before buying, as you may not like the angle.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: AR-15 storage grip

Target Market: Those wanting a better grip, or those wanting storage in the grip

FNBs (Features & Benefits of this product):

• Battery storage
• Grip texture
• Ergonomic

What other aesthetic options or finishes are available?: Black, Flat Dark Earth, Foliage Green

What others are saying?:

Stretch on Brownells 5/5 stars:  Solid. Not a fan of finger grooves. Backstrap fills the hand and alignment is perfect for me.

Mike on BravoCompany 5/5 stares:  This grip is outstanding!  The ergonomic feel of it is wonderful compared to the standard pistol grip found on M4/AR15 type rifles and the fact that it has a built in compartment which keeps batteries, spare parts safe, secure and free from dust, dirt, water, etc. is another outstanding feature to make this grip worth every penny!

Price point:

• MSRP = $35.93
• Retail = $36.99

I need it now! Availability: Brownells, Amazon, or your local gun shop

Our Rating:

Pros:

• Grip texture
• Water tight
• Ergonomic

Cons:

• Grip angle for some

Score: 8.0 Great

Chad's Favorite Link: Saddle Butte Machine Gun Shoot - May 16th & 17th 2015

Tipton Best Gun Vise

The Tipton Best Gun Vise has been a great addition to my shop. It has made cleaning my firearms much easier. It was designed to be able to be used with a wide array of firearms. You can handle everything from your break action shotgun to bolt action rifle to AR style rifles. I use The Tipton vise for cleaning and maintaining all of my bolt action rifles. After I finally picked up one of these, I couldn’t imagine not using it. The back section has an adjustable clamp and you use to lock onto the rear of the stock to hold the firearm secure while the front notch holds the front of the firearm still. You can swap out the center rest from a magazine style holder that will allow you to work on your 1911.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Clamps in many different  firearms so you can work on them easier.

Target Market: Hunters and gun enthusiast.

FNBs (Features & Benefits of this product):

• Accommodates wide range of firearms
• Non marring surfaces
• Solvent resistant
• Adjustable

What other aesthetic options or finishes are available?: Available colors are white with red pads or white with black pads. The “white” is actually more of a grey.

What others are saying?: “The Tipton vise is well thought out, accommodating virtually any size gun and simplifying tasks such as cleaning, mounting hardware, adjusting sights. The only improvement I could suggest is making it easier to clamp the vise onto the workbench when using a sight drift, cleaning with a bore brush, or doing other jobs that require some measure of force to be applied to the firearm.”

Price point: (MSRP versus actual retail)

• MSRP = $144.99
• Retail = $73.99

I need it now! Availability: Order from Amazon or find it at your local hunting supply store.

Our Rating:

Pros:

• Adjustable
• Light Weight
• Solvent Resistant

Cons:

• Flimsy Clamping (The clamp mounts bow out easily)
• The Plastic tabs like to come out of the track.
• Can be a pain to get it assembled for the first time.

Score: 7.5 Good

Featured FFL

Lead Head Firearms

Gunvault Multivault Standard

I have been shooting and owning firearms for over ten years now, yet I have never kept a firearm for home defense. About a year ago, I began thinking I should start to familiarize myself with keeping a firearm prepared for defense. I have no fear of using it because I live in a nice area in a high rise with a doorman (not as posh as it sounds) but plan on moving in the near future and want to start learning and getting comfortable with keeping firearms ready for defense. I've been looking at similar bedside safes for a while, yet the price tag kept me spending money on more guns, ammo, and accessories, instead of something I would hope to never need. While waiting for my background check to clear, I was looking around my LGS and saw they had a sale going on their Gunvault products. At first, I picked up the Minivault and got home, programmed it, and began dry fire practice utilizing drawing from the safe. I'm a big guy, and my mitts just were not working well with the Minivault. I went back to the store and returned it to purchase its bigger brother, the Multivault.

Multivault is possibly referencing not only the ability to store multiple handguns, but also a variety of items. The biggest draw was the gaping maw of this thing. The nice wide opening allows easy access to draw your firearm quickly and snag free from a multitude of angles. When this thing opens, it OPENS. The door is spring loaded and retained in the locked position when unlocked, the latch lets go, and that strong spring slams the door open, yet it buffered by rubber pads on the base, as to not mar whatever this is placed on or affixed to. As far as entering your code, this safe utilizes a four button system that allows you to press one or all buttons per entry and use 3-6 entries. Basically, your code could be to press all four buttons 6 times but, that doesn't seem like a wise idea. While you shouldn't enter all 4 buttons 6 times, this allows for a greater variety of entries and a more secure combination.

I have now begun training with this, and it's a snap to pick up and adapt it to your defensive needs. If my living situation ever deemed it necessary, I would surely pick up another one, or two, of these as needed to adequately cover my home. The underlying thing I find important that sometimes people overlook, is to make sure whatever you are running works for you. Sometimes, price is a factor, but if I hadn't spent the extra 40 bucks for this bigger model, I would have a 20 lb striking implement as my hand was stuck inside.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Accessible defensive firearm, and valuables storage.

Target Market:  Anyone looking for a convenient and secure means to store a defensive handgun.

FNBs (Features & Benefits of this product):

• Compact
•  Quality of materials
• 4 key keypad programmable up to 6 entry code utilizing one or all buttons per entry
• Easy to use
• Large enough for big hands store a gun and two mags of two guns and extra mags
• Mounts almost anywhere, in any direction
• Protective foam-lined interior, with extra storage capacity and a removable interior shelf
• "Learn Buttons" make it easy to program over 12 million user-selectable access codes

What other aesthetic options or finishes are available?: Minivault is the exact same thing but smaller, there are also biometric options.

What others are saying?: Check out the Amazon reviews averaging 4/5 stars.

Price point: 

• MSRP = $200.99
• Retail = $154.55 

I need it now! Availability: These can commonly be found at local sporting goods and gun shops.

Our Rating:

Pros:

• Level of customization for combo
• Amount of interior space
• Dimension of the opening
• Solid construction
• Awesome design

Score: 8.0 Great

My links:

NJGunBlog

Guns of Hollywood Podcast

MidwayUSA Competition Range Bag

I was searching for a good range bag a while back, as my old duffle bag had given up on me. So, I went searching the web for something that would meet my criteria. What I found was the MidwayUSA Competition Range bag. During my search, I ran into a number of range bags, but most if them were too small for my taste. The Midway bag had almost everything I wanted. It is very large, which allows me to keep all my range goodies in one spot. It comes with a removable padded carrying strap. It has lots of different zippered compartments, 8 of different sizes plus 1 main compartment. Some of the larger ones even contain pockets inside of them. In the large side pocket, there are holders for 8 pistol magazines and 12 elastic holders for pens, cleaning rods, etc. Now, for the really good stuff. Inside the vast main double zippered compartment is a handled carry bag, which has its own zippered storage and padded hook & loop separators. You can use this handy little bag for ammo and supplies. It, basically, gives you the ability to leave the heavy bag in your vehicle and just carry what you really need for the shooting session. I use this little bag for carrying ammo and magazines at matches where I have to go from stage to stage. The other nice feature about the range bag is that it comes with a matching bag to put brass in. It also comes with 2 padded pistol pouches. These pouches are quite large, also, and can fit full size handguns without any problems.

The only thing I don't like about the pistol rugs is that they are fairly flimsy and not padded enough.  The zippers are double stitched, and some of them have a round zipper pull to aid in using them. Overall, I am very pleased with this range bag. It stores all of my range goodies, plus an extra kitchen sink.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:  Large Range Bag with lots of storage pockets

Target Market: Anyone looking for a good range bag

FNBs (Features & Benefits of this product):

• Length: 22"
• Width: 15"
• Height: 10"
• Main Compartment: 17" x 10" x 10"2 removable padded pistol rugs with zippers 8-½" H x 12" W fit most large frame semi-auto pistols and revolvers with barrels up to 6"
• Removable stage bag/ammunition carrier with carrying handles for portability 15" L x 5" W x7-½"H
• Front: 2 Padded zippered pockets (8" L x 2" W x 8" H)
• Rear: 8" x 2" x 16"8 magazine pouchesInternal padded pocket 8" x 15.5"
• Shoulder Carry Strap: 2" W x 52" L removable carrying strap with shoulder pad
• Carry Handles: Wraparound with hook & loop closure
• Removable stage bag/ammunition carrier features:2 Padded zippered pockets (7-½" H x 15" L)2 Padded moveable hook and loop equiped compartment walls2 Chrome plated steel D-rings for quick attachment of the carry strapFull wrap-around nylon handles2 removable padded pistol rugs features:8.5" x 12" will fit most large frame semi-auto pistols and revolvers with barrels up to 6"
• 9 Pockets
• Material: PVC Coated Polyester
• Capacity: 2404 C.I.

What other aesthetic options or finishes are available?: Black, Grey, Coyote, and Olive Drab (MultiCam not available anymore)

What others are saying?: 

• From MidwayUSA: by Terry in Mount Sterling, KY.  5 out 5 stars:  Roomy, nice compartments, lots of storage, sturdy, practical, not sure what else you would want in a range bag.
• From Thetruthaboutguns.com: by Nathan Shonts.  4 or 5 out 5 stars:  Useability: * * * * Flexible, practical design with more pockets than I know what to do with.   Value: * * * * * At its $45 sale price, this well-made bag is a fantastic bargain. At its “normal” price of $80, it’s still nice.      Overall: * * * *(*)  At $45 it’s a great value and gets all five stars. At the $80 full price, still a solid four stars. Either way, you won’t regret it.

Price point: 

• MSRP = $49.99-80.99 Depending on Sale price or Retail Price
• Retail = $59.99

I need it now! Availability:  MidwayUSA

Our Rating: 

Pros:

• Number of pockets (9)
• Comes with 2 pistol pouches
• Removable ammunition/storage bag
• Double stitching on zippers
• Brass bag
• Padded Carry strap
• Built in magazine pouches

Cons:

• Flimsy pistol pouches
• Heavy, especially when loaded with all your stuff

Score: 8.0 Great

Chad's Links: Saddle Butte Machinegun Shoot

Griffon Ind. Hearing Protection Cover

The Griffon Industries Hearing Protection Cover is an excellent addition to either a new or a used pair of electronic ear protection.  The cover is constructed of a ballistic nylon with a vented padding.  It is attached by some very strong hook and loop fastening.  The cover is made to go over the existing band that goes over your head.  The padding on the cover makes the ear protection much more comfortable and looks good also.  I purchased mine for my peltor tactical 6-s.  The plastic cover that came on my 6-s had split along the edge, this didn't really cause any problems, but I didn't like how it looked.  Griffon makes the hearing protection cover for 3 different manufactures of hearing protection:  The Peltor series, The MSA Sordin, and the popular Howard Leight.   It is also available in three patterns: Multicam (what I purchased), Kryptec Typhon, and AOR1 (Think Desert Digital).  A Griffon Industries patch also came with the cover and is intended to be put on the cover.  There is a nice pattern appropriate hook and loop fastener on the outer of the cover for this or other patches.  A small loop is also sewn into the center of the cover so that you can hook it somewhere when not in use.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Padded Hearing Protection cover

Target Market: Those who want a padded headband on there ear protection

FNBs (Features & Benefits of this product):

• Padded
• Loop for hanging up
• Color pattern options
• Comfortable

What other aesthetic options or finishes are available?  Kryptec Typhon and AOR1

Price point: 

• MSRP = $25-32 depending on pattern

I need it now! Availability: Griffon Industries

Our Rating:

Pros

• Comfort
• Style
• Padded

Cons

• Availability

Score: 8.5 Great

Chad's favorite link: Hand Gun Radio

Rock Island Armory TAC 1911 FS 9mm

Rock Island Armory / Armscor is a Manufacture of 1911 pistols and some other firearms from the Philippines. I chose their TAC 1911 in 9mm. This is a full size parkerized, not blued, 1911 chambered in 9mm (duh). The pistol comes from the factory with a Novak style rear low-profile sight and a post front, both dovetailed into the slide. Both sights are target black with no dots of any type. This 1911 is a series 70 style, meaning it has no firing pin safety. The TAC model also comes with an extended ambi thumb safety, a beavertail grip safety, beveled magazine well, longer trigger, commander style hammer, full length guide rod, and a checkered flat mainspring housing. While the extended thumb safety is nice, it is too sharp for my liking. Where the safety angle back toward the frame, there is are really sharp corner. This sharp safety cause the pistol's safety to bite into your thumb under recoil, it was however better if you are one that rides the thumb safety. The frame of the pistol has vertical grooves on the front to help aid in your grip. I would have liked it better if they had checkered the front strap. The rear checkered mainspring housing feels nice in the hand, it is however made from plastic. The beavertail grip safety is very nice. It has a bump on the bottom to aid in depressing it and has a nice feel to it. Having a longer skeletonized trigger placed my finger just right, for people with shorter or longer fingers this might not be the case. The commander hammer and beveled mag well are nice touches also. The rubber checkered grips that come on the pistol where not of my liking, but they do supply an okay gripping surface. The RIA TAC 1911 makes for a good entry level 1911 with quite a few built in options.

The TAC 9mm is extremely accurate. I could keep shots under a 1" circle at 7 yards off hand. The slide to frame fit on this pistol is very tight and I believe that is why it shoots so good. That, and the fact that the trigger was extremely smooth out of the box. The trigger has very little take up and over travel is adjustable with a set screw that is located in the trigger. The trigger pull weight is about 5 1/2 pounds. I have had no failures with the pistol in over 500 rounds of various types of 9mm ammo. Recoil is very manageable as one might expect with an all steel 1911 in 9mm. All in all I really do like this offering from Rock Island. It shoots great and would make an excellent starting point for a more custom pistol. Rock Island has many other 1911 style pistols also. So if this style isn't what you are looking for, they probably make a style you might want.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Entry level priced 1911 in 9mm with good options

Target Market: Shooters wanting a full size 1911 in 9mm

FNBs (Features & Benefits of this product):

• Caliber: 9mm
• Finish: Parkerized
• Operation: Single Action Semi-Automatic with Thumb and Beavertail Safeties
• Barrel: 5"
• Length: 8 1/2"
• Height: 5 1/4"
• Width: 1.4" at the safety and 0.9" at the slide
• Weight: 2.56 lbs
• Grips: Textured black rubber
• Sights: Novak style rear, Post front, both dovetailed in for drift adjustability
• Safety: Extended Ambidextrous thumb and Beavertail grip
• Capacity: 9+1
• Trigger: Skeletonized
• Hammer: Combat style
• Beveled magazine well

What other aesthetic options or finishes are available?: The Rock Island Armory Tac 1911 is available in many different styles and calibers available at Rock Island Armory

What others are saying?: 

• Budsgunshop.com By: Preston O on 07/20/2014Rating:  [5 of 5 Stars!] This gun is amazing! This is my first 1911 and the first gun I've bought off Bud's. Took it out to the range the first weekend after I got it and put about 75 rounds through it without any issues. Zero issues! The gun cycles everything I've put through it. I have even hand cycled some Hornady Custom 147gr JHP through this bad boy and still zero issues. I've read that if you are going to run HP's through this then go with a larger bullet. Don't use 115gr or 124gr. I have read that they can have issues, but the 147gr run perfectly. The gun comes with a Metalform magazine which i highly recommend for this gun. I bought a Metalform 10rd and it runs perfectly. Again, zero issues! The only thing I will say is that the picture shows the new model with the small logo on the rear of the slide. I got the older model with the "Rock Island Armory" billboard on the slide, but it's not that big of a big deal.
• Budsgunshop.com By: Andrew C on 07/09/2014Rating:  [4 of 5 Stars!] This was my first Rock Island Armory purchase and let me say it won't be my last. Fit and finish exceeded my expectations for a sub-$450 1911. It shot great right out of the box and with over 300 rounds through it, I've experienced no failures, even with the sometimes sketchy reloads and cast lead bullets folks give me. It came with nice brand name magazines (to which I added a slam pad). Accuracy is very good and with a full size 1911 frame shooting 9mm, recoil is light. Now, why only four stars. My pistol came with a firing pin stop that I could not remove. I personally think they put a little too much finish on the slide and it got stuck. I sent it off to RIA prepaid and they fixed it, no problem. Now, it is a really great pistol and one I love to shoot. I wish I could give it 4.5 stars but that isn't an option. Anyway, I am quite satisfied and recommend this pistol.

Price point: MSRP = $559 Retail = $465

I need it now! Availability: Check your local gun store

Our Rating: 

Pros:

• Price
• Novak style sights
• Extended Beavertail grip safety
• Full length guide rod
• Extended skeletonized trigger
• Beveled Mag-well
• Combat hammer
• Smooth trigger
• Ambi-safety (see Cons)

Cons:

• Thumb safety is sharp
• Rubber grips
• Plastic mainspring housing
• Only comes with 1 magazine

Score: 8.5 Great

Chad's Favorite Link: U.S. Tactical Supply

Lone Wolf Distributors Ultimate Adjustable Trigger

IMG_0430

Let me start off this review by saying I am not a huge fan of Glocks. The grips never usually fit me right, they feel really blocky to me and they just don’t excite me like a wood and steel gun does. With my personal feelings on Glocks out of the way, let me say that Glocks are rugged, accurate and reliable handguns that have withstood the early criticisms leveled against them, and have emerged as the top handgun for law enforcement and personal defense. Their polymer frame offers light weight, along with some recoil reducing characteristics and manufacturing economy. The Tenifer treatment on the slide helps ensure that the guns resist corrosion, even after the black finish on the slide is worn away over time. I have seen many police trade-in Glocks with the black finish worn away from reholstering, and the exposed metal still did not show any signs of rust forming. Glocks are definitely in it for the long haul when it comes to quality construction.

The UAT is made of 6061 Billet Aluminum

However, one thing that some people do not care for is the trigger. To me, the factory Glock trigger feels very spongy. I definitely notice a “sproing” feeling just after the trigger breaks, and it can be distracting to me, and many other people as well. Due to the less-than-stellar factory trigger, there has been a growing number of Glock drop-in replacement triggers to help improve the trigger pull & feel. Many of these units use multiple pins in their assembly and generally are not adjustable after the trigger is installed in the frame. They are also quite expensive, with units ranging from $99.00 to upwards of $180.00. For those people who want to upgrade the trigger on their Glock, those features and prices can be prohibitive. There weren’t really any other options out there for people who wanted a easily adjustable and affordable aftermarket trigger….until now.

The pre-travel adjustment screw is visible just under the locking block

The Lone Wolf Distributors Ultimate Adjustable Trigger offers easy adjustability while the trigger is still installed in the gun. Couple that with the low retail price of $74.95 on the trigger, and I think Lone Wolf has a winner here. The trigger shoe is constructed out of 6061 billet aluminum and is held together with one simple, yet robust, allen head screw, and does not use any press out pins like you see in similar trigger units. The shoe is nicely radiused, and to me felt far better comfort wise than the stock trigger. The trigger bar that comes with the shoe is very nicely polished and eliminates any friction that may have been present with the stock trigger unit. The trigger safety has also been altered somewhat, and seems to sit more flush with the trigger unit than the stock unit does. I definitely noticed the difference in the trigger safety; that is to say I barely noticed it’s presence at all (which to me is a good thing!). However, testing the trigger safety’s function shows that it operates just as positively as the stock unit does (provided you adjusted it according to the well illustrated instructions; more on that later.)

The over-travel adjustment screw is easily accessible on the back of the trigger shoe.

I installed the UAT in a Glock 22 using a 9mm Lone Wolf conversion barrel. I used a 3.5 lb connector and a 6 lb trigger spring, also from Lone Wolf. Installation of the trigger was a snap, especially with the really well done instructions provided by LWD. Once the trigger is installed in the gun, the real fun begins. The trigger comes with two allen keys, with one a bit bigger than the other. These allen keys are used to adjust the pre-travel and over-travel screws that are on the trigger. The instructions show you how to do the initial setup of the trigger once you have it in your gun, and it is VERY, VERY IMPORTANT that you follow them. If you do not properly adjust the pre-travel and check it, you can cause a condition where the trigger safety does not rest in the proper place, and the trigger is free to be depressed without the safety disengaged. Following the instructions, it is very simple to adjust the pre-travel safely to your desired setting. Just insert the allen key in between the slide lock and the locking block. To remove pre-travel, you turn the screw clockwise, to add pre-travel, you turn it counter-clockwise. Simple as that. To adjust the amount of over-travel, you simply insert the allen key into the screw on the backside of the trigger shoe (in the magazine well area) and adjust to your preference. The best part about this is that it can all be done by simply removing the slide; further disassembly is not necessary.

After properly adjusting the trigger to my prefered amounts of pre- and over-travel, I checked the pull weight on my Lyman trigger pull gauge. With the 9mm LW Conversion barrel and the Glock 22 slide installed, the trigger broke cleanly at an average of 3.0 lbs. I then installed an Advantage Arms .22 Long RIfle Conversion unit on the same frame, and the trigger pull averaged around 3.4 lbs. There was a distinct difference in the trigger pull between the two configurations, with the conversion unit trigger pull feeling very crisp, like a finely tuned rifle trigger. I headed out to the range several weekends in a row to test the unit, and found that it functioned flawlessly as expected. Be sure to check out the video footage of the UAT in action on both the standard Glock 22 configuration and the Advantage Arms configuration, as it will give you a good idea of what I’m talking about. It is REALLY easy to just feather the trigger with the .22 Conversion unit and get a fast, accurate string of shots.

Glock 22 w/ UAT on bottom, Glock 35 on top with stock factory unit.

Overall, I am extremely impressed with what Lone Wolf has created. The UAT offers the end user a great amount of adjustability with easy installation and a very inexpensive price. Don’t let the price fool you, however; this is a quality unit. The construction is very nice and the precision machining utilized in making the trigger is readily apparent. Once assembled, the seam on the side of the trigger is darn near invisible with a quick glance. To get such precision on a small part like a trigger shoe is really impressive. It is such a huge step up, in my opinion, over the factory unit that, if I were to buy any more Glocks, I would automatically purchase one of these units for them. The inexpensive price coupled with the great quality and performance simply can’t be beat in the world of custom Glock triggers.                           You Tube Video

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Provides the Glock shooter with a nicely made & robust trigger than can be adjusted for pre-travel and over-travel without fully disassembling the firearm.

Target Market: Those Glock owners who want to upgrade their triggers to a more robust and user-adjustable unit (adjustable WITHOUT uninstalling the trigger).

FNBs (Features & Benefits of this product):

• Aluminum construction

• Polished trigger bar

• User adjustable for pre-travel and over-travel WITHOUT full disassembly.

• Different trigger shape & radiused edges offers better trigger control & comfort.

• Assembly uses only one screw.

What other aesthetic options or finishes are available?: It is available only in silver 6061 billet aluminum at this time.

Price point:

• MSRP =  $74.95

I need it now! Availabily: You can purchase from Lone Wolf Distributors

Our Rating:

Positives:

• Trigger feels amazing to use.

• Solid billet aluminum construction; no plastic.

• Polished trigger bar eliminates friction.

• The trigger shape offers better control & comfort for the shooter.

• Biggest plus? User adjustability for over-travel & pre-travel without uninstalling the trigger!!

90

Score: 9.0 Amazing

Ryan Michad Links

Handgun Radio

Firing Line Review

Aimline Glock Sights

When it comes to practical combat sights, there are many options out there. I found out about these Aimline sights from a friend and got in contact with the guys at KA Tactical. In short order, I had sent off, and got back, my Glock 19 slide and got to testing.

I found in my friend's Glock 19 that it is a pistol I shoot instinctively well, so I bought it (not to say he regrets selling it but he wants another one). This is due in part to the ergonomics and natural pointability it affords me. I also fell in love with the ball in the cup sight picture that came with the gun, but was not thrilled with plastic construction, so I was hesitant to make the change, but eager to upgrade. These Aimline sights feature all steel construction, which is a durability and utility upgrade over the stock Glock sights. The sight picture is another thing that drew me to these sights over other sights that feature three dot style sight pictures. The Aimline system works great for me, because the principle of the straight line formed by both the colored lines on the sights and the sight housings themselves create a sight picture that is both easily acquired and equally maintained through continuous fire.

I firmly believe that beauty is in the eye of the beholder, when it comes to sighting systems across all weapons platforms. The defensive handgun in particular benefits from a simple easy to acquire and consistently maintained sight picture. The value and strength that these Aimline sights provide, are definitely worth checking out. I am so pleased with these that If I dont go with an RMR on my new Glock 41 Gen 4 I know exactly what I will be putting on.

In the included video you can see these in action by me and my friend running some practical shooting drills.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: No nonsense combat sights.

Target Market: Currently Glock users

FNBs (Features & Benefits of this product):

• CNC machined out of 4100 steel with a black oxide finish
• 4 vibrant color choices
• Set screw on rear sight
• Designed to be snag free while maintaining belt/shoe racking.

What other aesthetic options or finishes are available?: White, Yellow, Green, and Orange color options are available.

What others are saying?: The Truth About Guns did a review on these sights here.

Price point:

• MSRP = $75 But Aimline is running a Christmas sale for $50
• Retail = I got mine from KA Tactical and they did the install.

I need it now! Availability: I have not seen these locally yet but with modern shipping you can get them pretty fast even if you send your slide to have the work done.

Our Rating:

Pros:

• Build Quality
• Function
• Fast Acquisition
• Quick Followup shots

Cons:

• Colored lines can be lost in low light/no light

Score: 8.0 Great

My Links:

NJgunblog

Guns of Hollywood

Sticky Holster

I’ll start off this product review by admitting that I am someone who is very hard to please when it comes to holsters. I think that may be a majority of the people who carry as well, but I am especially difficult in this regard. I absolutely hate tucking in shirts, and nothing is more annoying to me than having my firearm rubbing into my side all day. Because of this, I have been mostly relegated to pocket carry for the majority of my life. A good pocket holster should break up the outline of the firearm, as well as create a margin of safety by covering the trigger guard. An IWB holster should do the same thing. With most pocket holsters, retention of the holster on the draw is accomplished by having either a small hook-like appendage on the holster to snag on the pocket during the draw, or a sticky substance on the outside that tends to snag on the pocket material during the draw. Most IWB holsters accomplish this retention by using some sort of a belt clip, either plastic or metal (or button loops on some designs) that retain the holster in the pants during the draw stroke. The Sticky Holster uses the tacky outer surface material do accomplish this. However, the idea behind the Sticky holster goes much further than just pocket carry.

The Sticky Holster is designed to be quite versatile. The models that are designed for smaller framed guns, like my J-Frame, can be used one of two ways; either as a traditional pocket holster in a pants pocket, or as an IWB holster, wherever the user would prefer the firearm. Some guns are more suited to IWB carry than others, and some guns are more suited to pocket carry than others. It all comes down to personal preference. That would be one place where I would say the Sticky Holster shines. Rather than the user needing to purchase two separate holsters for two different modes of carry, the Sticky Holster can function either way. If you get up one day and decide that the pants you’re wearing have big enough pockets for pocket carry, you can put your firearm in the Sticky and put it in your pocket. If you decide that the pants you have on don’t really support pocket carry, you can tuck the whole firearm and holster unit into your waistband between your side and your belt and carry it IWB. The clipless design allows for the user to put the holster and firearm wherever on their beltline they would prefer, and this could be a significant advantage, as some pants have belt loops that tend to always be in the EXACT location where you want to put the firearm. Not having to contend with the exposed clip allows for many more location options.

For my test & evaluation purposes, I was provided with the MD-5 size holster from Sticky. It is designed to hold snubby revolvers with a barrel length up to 2.125”. It fit the revolver well, and the quality of construction and materials were quite nice. I must admit, this is my first experience with a holster of this style, and many of the things I experienced when using the Sticky holster could be chalked up to my inexperience with the system. When pocket carrying the Sticky holster, the retention was good during the draw, and the holster covering the hammer helped to prevent any snags during the draw. One of the negatives I found when pocket carrying with my J-frame was that there seemed to be quite a lot of extra material toward the bottom edge of the holster. This was causing the holster and gun to be pushed up and somewhat out of my pocket slightly when I sat down in the car. Perhaps this could be an issue with the pants I wear (Carhartt’s) but could also be an issue with a little too much material on the holster. It's not a deal breaker for the product, but something to be aware of for those folks who are buying the Sticky as a main pocket carry holster.

Carrying IWB with the Sticky holster is pretty easy, but it does take some getting used to for those people who are accustomed to having a clipped IWB design. The Sticky uses the compression of your belt against your side in conjunction with the tacky material to afford retention of the holster and firearm. I tried this with several different types of pants and gym shorts and found myself to be most comfortable with the Sticky while using normal pants and a belt for retention. There were a few times that after fast running or jumping that the Sticky had moved from where I had originally placed it. I had a similar issue with it while sitting down in the car. This could be a function of my body type and the type of seats I have in my vehicle, but it is something for the prospective buyer to be aware of. There is versatility in this holster, but it may not work for everyone, depending upon your lifestyle and comfort level. I have heard people talk about using the Sticky as a holster for when they are wearing pants or shorts that are not meant to be worn with a belt, and that use a simple drawstring for compression around the waist. I tried this several times, but the Sticky holster just did not feel secure enough for me in the waistband for me to trust this method of carry with that style of pant. Granted, I am carrying a very NON-lightweight J-frame (Stainless Model 60) so that method of carry may work better for people carrying a lighter weight weapon, but for me it just didn’t work out as well.

In closing, the Sticky holster is a good product that does help out in the holster decision process. It offers a versatility you sometimes won’t find with other holsters, and does so at a competitive price. I see that Sticky is planning on offering a reinforced model soon (Spring 2015) and that should alleviate some of my concerns with the thickness of the material. The instructions provided with the Sticky are clear and conscise, and explain the process for safe use of the holster, as well as the cleaning process (Which is very easy!). If you are someone who needs a versatile holster, and just can’t seem to find one which fits your needs, check out the Sticky Holster. It did not work well for me as an IWB holster, and worked best as a pocket style holster, but it may fill the IWB & Pocket Holster needs for you!

Firearms Insider Reviews - 8 Key Points

Claim to Fame: This product is a holster that is designed for use either in the pocket or inside the waistband. It is a clipless design that uses compression from the pants/belt and a tacky outer material to retain the holster and firearm.

Target Market: Concealed carriers, especially those people who do not care for the clipped design of most IWB holsters or those people who frequently have to remove their holstered firearm, for reasons such as entering areas where carry is prohibited. The clipless design of the holster makes it easy to remove the firearm and holster as one unit for safe storage in a legal location.

FNBs (Features & Benefits of this product):

• Clipless Design allows for versatility in terms of holster location.
• The holster allows for the user to choose pocket carry or IWB carry (Within certain limitations, mainly gun size.)
• Easily cleaned if the holster becomes soiled.
• Lightweight and not a lot of bulk.
• Covered the hammer of my revolver completely rather than allowing it to stick out above the mouth of the holster. This can be an important consideration for comfortable carry.

What other aesthetic options or finishes are available?: The holster is offered in a simple, black finish that has a stitched outer border and a tacky rubber like substance that I can most closely approximate to the material that is put on the handles of exercise equipment.

What others are saying?: “This was purchased for my SP101, and is my third Sticky Holster. I prefer the versatility these holsters give over a standard IWB holster; much thinner than leather, no clips or straps to get in the way, and it stays put.” - Amazon Review

Price point:

• MSRP = $24.95
• Retail = From Amazon $24.95

I need it now! Availability (Where can I buy this TODAY?) Amazon.com or Sticky Holsters

Our Rating:

Pros:

• Lightweight
• Sticky material allows for placement in different places on the belt.
• Clipless design removes the problem of belt loops getting in the way of the clip.
• Versatility; the holster can be used as a pocket or IWB carry option.

Cons:

• Holster can be somewhat bulky depending upon application. Pocket carry was pushing the limits of my pocket capacity (others may vary)
• The material is quite thin. It seems plenty durable, but I would prefer a bit thicker, with perhaps a reinforced holster mouth (Says on the Sticky website this is coming soon)

Score: 7.5 Good

Ryan’s Links:

Handgun Radio

PWS FSC556 Compensator

When I decided to dive into the AR-15 world, I needed to choose and a muzzle device. Since I was going to be using a 14.5inch barrel, I needed a long enough muzzle device to reach the 16 inch overall barrel length, so I wouldn’t have to SBR the rifle. I was looking for a device that was not only a flash hider but also a compensator.  This limited my selection, however, the choice was easy once I came across the PWS FSC556 Compensator. Once I installed it on my rifle, I was reaffirmed in my selection. Not only was it good at hiding the flash, but the compensation was fabulous. Shooting the rifle with the FSC556 was comparable to shooting a 22 long rifle. The compensation keeps the rifle shooting nice and flat, which aided in getting back on target quicker and moving from target to target. I have shot other compensators that seem to drive the barrel down more than necessary. And the FSC556 stayed nice and level. This muzzle device is definitely not the quietest out there, however, it is also not the loudest I have heard. Along with the increased noise (which I really didn’t notice but was told by my friends shooting with me) was the increased muzzle blast to that is directed to the sides. My friends shooting next to me kindly (or not so kindly) let me know about this. All I had to say though was “look at my groups” and they wanted to shoot it.

Since purchasing the FSC556 I have also put the FSC30 on my AR-10 and it does just as good of a job on the heavy hitting 308.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:  A flash hiding compensator for putting a high volume of rounds on target.

Target Market: For those looking for a flash hider and compensator in one.

FNBs (Features & Benefits of this product):

• Flash Hider
• Compensator
• Improved recoil management for follow up shoots
• It is Gemtech Halo compatible
• Standard muzzle device on FNH rifles

What other aesthetic options or finishes are available?:  Black

There are also a  couple of different models depending on your needs.

• FSC556 - Standard 5.56/.223 model
• FSC30 - Standard 30 cal model
• FSC91 - HK compatible model
• KAC556 - basically the same as the FSC556 but is compatible with the Knights Armament suppressors

What others are saying?: "BravoCompanyUSA: I've got 20yrs behind most AR type weapons and regardless of "blow back" and "noise" from this comp, it's insane.  Anyone who has ever been downrange in the soup knows that "noise" is nothing.  Couldn't hear in the audible distress if you tried, but the drop in group at a high rate of fire is insane!  Feels like dumping a BB gun load with punch!  Thanks to Mr. Grant for nailing this beauty!"

 Price point:

• MSRP = $99.95
• Retail =  $94.95

I need it now! Availability: You can purchase the PWS FSC556 from Brownells.

Our Rating:

Pros:

• Flat shooting
• reduced muzzle flash

Cons:

• Price
• Increased noise and muzzle blast
• Not compatible with most suppressors

Score: 8.5 Great