price

GForce Arms Rapture

  I recently ran across the GForce Arms GF9 Rapture handgun. I was intrigued by this new micro-compact handgun as it has a bunch of Glock parts compatibility. So much so that I contacted GForce Arms about getting one for review. As you can figure out, GForce sent out a Rapture to do a full review on. The Rapture surprised me with all its features, especially that it can be found for around $350.

G43 on top of Rapture for size comparison. Rapture grip frame is about 1/2” longer with no magazines inserted. Picture is not a perfect representation

  The Rapture is a small 9mm handgun aimed at the carry market. For comparison, it is roughly the same size as a Sig P365X. So it technically fits into the “Micro Compact” size description. The Rapture’s grip frame is larger front to rear, so it feels good in the hand, at least mine. The Rapture is still very narrow, coming in at 1.12” total. It runs a 3.25” barrel for a total length of 6.6”. The main difference in the GForce Rapture is that it has a bunch of parts compatibility with the G26. Including working in G26 holsters.

  GForce Arms put a lot of work into designing the Rapture. For the polymer frame, they gave it a great usable sandpaper type texture. This texture is on the front, sides, and rear backstrap. It is also toward the front of the frame where you would rest your trigger finger or thumb. Speaking of the backstrap, the Rapture comes with 4 different ones. A 0° that comes installed on the Rapture, then a 2°, 4°, and a 6°. These options help the pistol to fit any hand size, from small to large. On the rear of the Rapture is a beavertail to help lessen the chance of slide bite. GForce Arms kept it on the smaller side, I believe, to keep the pistol compact. It still functions as expected. The grip also has some slight indents where your trigger finger and thumb rest. This aids in getting a proper trigger pull for those with smaller fingers. It also helps with hitting the large magazine release. Being fairly large, the mag release size is nice and very useful. Helping to get rid of that awful Glock knuckle, is a slightly undercut trigger guard. One of the few flaws I found with the Rapture is the lack of a rail at the front of the pistol. But, it also wouldn’t fit in standard G26 holsters if it had one. Lastly, there is a thin slide release. Amazingly, the slide release was way easier to use then I expected it to be.

  When GForce Arms says the Rapture is “heavy in glock compatibility”, it is. All of the internal parts are gen 3 Glock compatible, and some of the external ones. So if you want to change out the barrel, trigger, trigger bar, slide, end plate, and sights, you can. Just use any of the readily available gen 3 aftermarket parts. 

  The trigger in the Rapture is decent. It starts with a flat face with a little hook on the end. Yes, there’s the little safety inside the trigger. The flipper safety seemed a bit strong, but it didn’t keep the trigger from being pulled, so it works fine. I do like the little hook on the end of the trigger. It helps a little bit to keep my finger from sliding all the way down and rubbing against the inside of the trigger guard. Trigger pull is decent, for these types of striker fired pistols. The Rapture’s trigger does have a decent break, not mushy like some gen 3 triggers are. Trigger pull weight was 5.5 lbs on my trigger pull gauge. I thought the weight was decent for a carry gun. Besides, if you want it lighter, there are plenty of parts on the market to make it anyway you want.

  Sitting on top of the GForce Rapture’s frame, is a fantastic slide. Yes, the slide looks kind of blocky, until you get a good look at it. It has front and rear angled cocking serrations, These are fairly deep cut, not overly sharp, and slightly deeper at the top. These serrations work extremely well. They blend into the frame nicely and look good. Inside the slide is a nondescript barrel and dual recoil spring system. Back on top of the slide are metal fiber optic iron sights. The front is red, and the back are green, both feature anti-glare serrations. The Rapture uses standard Glock sights, a big plus if you want to change them out for higher profile ones. Why would you want higher profile sights? Because the Rapture comes cut for optics! But it doesn’t stop there. The Raptures slide is cut directly for both the RMR and RMSc (sheild) footprints. GForce Arms also includes locator pins to use with either optics. These pins also help minimize optic movement under recoil. A nice optic cover plate comes installed if you don’t wish to mount an optic on the Rapture.

  I ordered up a kydex holster for the Rapture. Once it showed up, I began carrying the Rapture on and off. The gun carries nicely with an IWB holster. Being that the Rapture is not big, that helped. Probably what helped the most is the thinness of the Rapture. One thing I noticed while carrying the Rapture was how the magazine's pinky extension stuck out more than I liked. GForce doesn’t have an option for a magazine without the pinky extension. So I proceeded to dremel off the extension on one of the magazines, making it flush fit. This helped a lot in how noticeable the pistol was under just a T-shirt. I thought the sandpaper texture might cause some discomfort when carrying. To my surprise, the texture didn’t feel bad against my skin. It is only a little bit noticeable to me. The Rapture makes a decent carry gun.

Modified flush fit magazine

  The Rapture comes with 2 magazines. I would have liked to see it come with 3. But since the Rapture can be found for under $350, that didn’t hurt me too bad. Plus, extra magazines are only $25. Both the magazines sent with the Rapture are steel and hold 12 rounds each. Both have that aforementioned pinky extension. The Rapture magazines are proprietary. Also not a deal breaker for me. Remember, P365 mags are proprietary also. I have had zero problems with the Rapture magazines. 

  Shooting the Rapture was a pleasure. The first thing I noticed was that it didn’t have as much felt recoil. Or at least less than I was expecting from a pistol this size. I shot it with the fiber optic sights. Those sights are really easy to pick up and fairly fast. I then proceeded to mount an optic up top. I used the RMR cut option and installed a Swampfox Liberty. With this combo, the factory iron sights just peek above the optic. You can still use them as back up irons, but just barely. I ran all different weights of 9mm through the Rapture, with both the irons and an optic. The only problem I ran into was some factory reloaded ammo that wouldn’t go into battery. Not the Rapture’s fault because all the factory new ammunition I used ran flawlessly. So I would say the Rapture has more of a match chamber. In fact, the pistol ran flawlessly with zero malfunctions through about 750 rounds. No, I didn’t clean it either. I didn’t run an accuracy test on the Rapture, but I did run a dot torture with it at 5 yds. The Rapture performed well, I didn’t. I also set up my A-Zone steel at 50 yds. The Rapture didn’t have any problems reliably ringing it. So I’d say it’s more accurate then I am. When shooting and manipulating the Rapture, I also noticed that it doesn’t have any sharp edges on it, at least if you don’t count the front sight. Overall, the Rapture exceeded what I was expecting

  I really hope the GForce Arms Rapture stays around. It is a very well made, American, micro compact pistol. Plus it is affordable, hitting the streets at under $350. It has 12 round capacity, is thin, has lots of Glock compatibility, comes with 4 backstraps, and can mount any of the common red dot optics. I feel you can’t go wrong with the Rapture. Check it out at GForce Arms or your local dealer.

Firearms Insider Reviews - Key Points

Claim to Fame:

Sub-Compact handgun with a lot of Glock compatibility

Target Market:

Those wanting a quality micro-compact firearm at a decent price

Features, Benefits, and Specifications of this product:

  • Caliber: 9mm Luger

  • Capacity: 12+1

  • Comes with 2 Magazines

  • Frame Material: Textured Glass Filled Polymer

  • Comes with 4 Backstraps: 0°, 2°, 4°, & 6°

  • Optic Cut for RMR or RMSc footprints

  • Sights: Fiber Optic - Red Front / Green Rear 

  • Barrel Length: 3.25"

  • Trigger: Flat Face with hook

  • Weight: 22.5oz with empty magazine

  • Width (Overall): 1.12”

  • Height: 4.7” without magazine

  • Length (Overall): 6.62” 

  • Highly Glock Compatible, most parts are interchangeable 

  • Uses Glock sights

  • Comes with carry case that’s cut for optics

  • Made in USA

  • Assembled and tested in Reno, NV

  • Lifetime Warranty 

What other aesthetic options or finishes are available?

Flat Dark Earth 

What others are saying?:

Nothing found as of publishing`

Link to other reviews:

Outdoor News America

Price point:

MSRP = $379.00

Retail = $329.00 at Global Ordnance or Guns.com 

I need it now! Availability:

Global Ordnance, Guns.com, or your local FFL

Our Rating:

Pros:

  • Price

  • Glock compatibility

  • Optic cut with pins

  • Fiber Optic steel sights

  • Backstraps

  • Large mag release button

Cons:

  • No accessory rail

  • No flush fit magazines

Score: 8.00 Great

Favorite Link:  SwampFox Liberty Review