AR Gold trigger

  Some time ago I was asked if I had ever used an AR Gold trigger. My answer was “no”, but I had heard they are pretty good. That led me to ask American Trigger Corporation if they would send one out for a full review. As one can guess, here I am with a full review of the Adjustable, curved, AR Gold trigger.

  When the AR Gold trigger showed up, I eagerly installed it into a lower receiver. The AR Gold comes in a nicely packaged box with some stickers and such. The packaging itself makes the trigger look like a finely tuned race car, which it kind of is. Since the AR Gold is a cartridge style AR-15 trigger, installation is very straightforward. 

  As mentioned, I opted for the adjustable version. Yes, a non-adjustable one is also available, its pull weight is set at 3.5 lbs. The adjustable one is also set at the factory to 3.5 lbs. I set mine a little lighter, down to 2.5 lbs. To adjust the AR Gold trigger, there are 2 set screws at the back of the trigger housing. Use the top screw. Clockwise will increase the sear tension, thus increasing the break weight of the trigger. Of course, turning the screw counter-clockwise will decrease the sear tension, lightening the trigger break. From ATC Gold’s website - “As you reduce the amount of spring tension on the sear, you WILL reach a point that the gun will not cock reliably when live firing – though it may still cock dry firing. On most AR’s this will occur somewhere between 3 and 2 lbs.” So go slowly with your adjustments. From my understanding, there is really no need to even go near the bottom screw on the trigger housing. I had no problems adjusting the AR gold trigger down to a measured 2.5 lbs, everything still safely checked out as normal. Individual results for the trigger adjustments may vary. ATC also designed this trigger from the ground up. It is not just a modified GI trigger in a drop-in cage. Which is really noticeable if you compare them side by side. 

  The trigger pull on the AR Gold is really good, but it may not be what you are used to. It is more like a really good 1911 pistol trigger pull. ATC has a good explanation on their website, but essentially it says “AR Gold is a single-stage with a slight bit of very light (8 oz.) of take up.” After the take up, you then hit the “wall,” this is where the actual pull weight is. Apply pressure and the trigger breaks super crisply. This is by far one of the crispest trigger pulls I have felt. When I measured it, at the bottom of the trigger shoe, the break only moved the trigger around 0.050”. So up higher on the trigger, the pull length is actually shorter. After the break, there is some slight over travel. Not a bunch, most people might not even notice it. Then there is the reset. The reset is short, essentially the same as the break of the trigger. But, the reset is not very positive. It didn’t seem to matter if the trigger was set to the factory 3.5 lbs, or the 2.5 lbs I set it at. I would have liked to see a more positive reset, but I could still shoot this trigger very fast. All kinds of “super fast” professional shooters use this trigger, so it’s not like the reset is slow.

  I chose the AR Gold with a curved trigger shoe. Why? Because I like the consistency that a curved trigger gives me. ATC also offers a flat style trigger shoe. I think the flat style looks better, but I’m about functionality. The AR Gold trigger shoe is pretty narrow. It doesn’t affect anything, it’s just notable compared to a GI trigger. The curve of the trigger feels very much like the curve of a GI trigger, at least to me. The trigger, as a whole, feels like an expensive watch. It functions superbly, but also looks elegant. 

  The AR Gold trigger could be used on just about any style of AR rifle. It is fast, has a great break, and is adjustable. So if you are just into backyard plinking, or full blown competition, the AR Gold might be something to look into. I’m probably going to stick it in a AR varmint rifle build, but what you do with one is really up to you. American Trigger Corporation did a great job making a 1911 style trigger for your AR. If you are into finely tuned race cars, or triggers that are similar, then you need to check out the AR Gold trigger.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Adjustable AR trigger with a super short break

Target Market:

Anyone wanting a top of the line AR trigger

FNBs (Features & Benefits of this product):

  • 3.5 lbs. (Adjustable Weight)

  • Drop Safe

  • Drop-In trigger module 

  • Includes .154” trigger pins

  • Short Reset

  • Short, Crisp break

  • Adjustable weight engagement and over-travel

  • Designed for AR-15 & AR-10 Platform (.223, 5.56, .308, 7.62, .300 BLK, 6.5 Grendal)

  • Made in USA

What other aesthetic options or finishes are available?

Flat faced trigger

What others are saying?:

4 out of 5 stars at Brownells

EXCELLENT

Pricey yes, but a great trigger. A clean sheet design. Not a reworked set of standard parts but a whole new way of thinking. Pulls very light and crisp. Yet punches deep pits into the primers. Can't comment on long term results until much more "testing" is done. But so far, perfect reliability and function. Just wish they were a bit cheaper. Then they would be a 5 star rating!

Link to other reviews:

Western Shooter  

Price point:

MSRP = $279.00

Retail = $279.00 at Rainier Arms  

I need it now! Availability:

American Trigger Co. or Rainier Arms

Our Rating:

Pros:

  • Super crisp Break - glass rod type

  • Adjustable

  • Thin trigger profile

  • Cartridge style drop-in installation

Cons:

  • Slower reset

  • Slight over-travel

  • Price

Score: 8.00 Great

Favorite Link:  Gun Guys Garage