Ares Armor Gavel Ambidextrous Safety Selector

When I got the Ares Armor Gavel out of the package I realized that there were two different sized safety selectors. I also noticed the sprocket design that allows the user to mount it at an angle that is easy and comfortable for them. As long as you can take something apart and put it back together you should have no problem installing this on your own rifle. It even comes with the tool to screw it together (as it should). Once you have the shaft installed then it’s time to figure out how you want it set up. The safety selectors can be mounted in 30 degree increments and they’re swappable.

I liked having it mounted so that when it was disengaged, the selector was vertical. I can manipulate the small one with my dominant hand so I like to have the larger one mounted on my offside. I found it to be easier to use with my offhand. It’s also designed to be a short throw safety selector. You only have to actuate it 55 degrees instead of the regular 90. The only thing that I didn’t like was that the safety selectors were made of polymer. I’m sure that they’re strong and will last for a long time, it just takes some time to get used to. I have recommended it to everyone I know with an AR and some friends without one.

Firearms Insider Reviews

Claim to Fame: Ambidextrous short throw safety selector.

Target Market: Anyone with an AR-15  or AR-10

FNBs (Features & Benefits of this product) Made of lightweight polymer. Shorter throw than regular safeties. 100% American made Many angles to set it to user preference.

What other aesthetic options or finishes are available? It’s only available in black. why would you want it any other way?

What others are saying? “...I'd suggest it to those building a lower or looking to upgrade their current set-up. ”-Zog117 ar15.com “...overall an excellent upgrade…”-Hunter aresarmor.com

Price point (MSRP versus actual retail) MSRP = $40.00 aresarmor.com Retail = $40.00 eBay.com

I need it now! Availability: Either try eBay or grab one from aresarmor.com.

Our Rating (What we say about it) + Installation is super easy + It comes with the necessary tools to install it + the piece that goes inside your AR is metal + Ambidextrous + Different sides are interchangeable and one is smaller than the other + Quicker to disengage the safety + Many angles to mount the safety selector - Actual safety selector made of polymer, feels cheap(performs great though)

Score 9.0 Amazing

Blackhawk Sportster Rifle Case

Firearms Insider Reviews - 8 Key Points

Claim to Fame: A convenient and extremely durable case to protect and carry your AR.

Target Market: AR shooters of all levels. 

FNB's:  (Features and Benefits of this product)

• 5 exterior magazine holders
• 1 large exterior pocket
• Full-opening for shooting mat configuration
• Heavy-duty YKK zippers
• Abrasion and mildew resistant 1000 denier nylon

What other aesthetic options or finishes are available?:  Black is the only color option that this bag is offered in.

What others are saying?:

• Amazon  4.5 out of 5 stars
• Optics Planet  4.7 out of 5 Stars

Price point:

• MSRP =  $43.99 - 46.99 (based upon size)
• Retail =  $25.99 - 39.99  (based upon size)

I need it now! Availability: Readily available online at stores like Optics Planet, Amazon and or Blackhawk.

Our Rating:

+ Extremely durable + Magazine pockets easily and securely hold 30rd mags + Can open up into a shooting mat + Closed-end foam is great at protection your firearm

- Made in Vietnam - No inner storage

Score: 9.0 Amazing

Jared prefers Simon Peter Sport Company for all his FFL needs.

Simply Rugged - Silver Dollar Pancake

By Alex P.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:  High quality and allows for several different carry options.

Target Market: EDC (every day carry) people that want maximum concealment in IWB (in waste band) mode or relaxed OWD (outer waste band) carry.

FNB's:  (Features and Benefits of this product)

• Scaled down for smaller revolvers
• Retain gun with no strap
• Designed to be work strong hand or cross draw
• Bottom of holster is open to allow grit, etc. to pass through

What other aesthetic options or finishes are available?:  Tan, black and oxblood.  Also, these holsters are highly customizable.  Check out their website for examples of how you can tailor yours.  Simply Rugged

What others are saying?: "The Silver Dollar makes for extraordinarily comfy carrying. It rides at just the right height (for me, anyway) and doesn’t dig in while sitting either at the computer or behind the wheel.”  The Truth About Guns

Price point:

• MSRP = $ 50.00
• Retail = Only available through the manufacturer

I need it now! Availability: I am yet to locate this holster on any other sites, but it is readily available on Simply Rugged.

Our Rating:

+ Low entry price + Several different carry options + Highly customizable

- Slightly bulky - Customer service is somewhat lacking - A bit awkward going between IWB straps and OWB belt loops - OWB belt loops are not compatible with many of the thicker gun belts

 Score: 7.0 Good

A-Zoom Snapcaps

I don’t know about you, but for me these little guys were one of those items that just kept being pushed to the wayside. These beauties can be had for $16-$18 and I always would look and say, “hmm .. I'd rather buy a box of ammo”.  To me, their value as a training aid never seemed great enough to warrant the expenditure. However after buying my first wheelgun that can utilize a speed-loader, changed this for me.  I wanted the ability to practice reloading with a speed-loader while at home and decided that snap caps would be a great safety measure to ­­­­take.  My entry into using these with speed-loaders have piqued my interest in utilizing them in regular magazines while training with semi automatic pistols as well.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:  Functionality.

Target Market:  Anyone involved in shooting sports.

FNB's:

Key Features

• Precision CNC Machined
• Made in the U.S.
• Patented “Dead Cap” provides limitless dry firing
• Hard anodized

Key Benefits

• Facilitates a safer training and or working environment

What other aesthetic options or finishes are available?:  This product is available in over 100 other calibers. My experience has been with .38 special and 12 gauge and I have had nothing but great results.   A-Zoom

What others are saying?: One review I found was very critical about the quality of the A-Zoom snap caps.

• Bad Review - Glory 2 America
• Good Review - ‪The Free Way Gear Review

Price Point: I purchased mine on Amazon for under $16 shipped, seems this is the cheapest route.

• MSRP = $17 - $19
• Retail = $15.62 with free shipping

I need it now! Availability: These can be found online such as on Amazon or the manufacturer. They are also typically at your local gun store in common calibers.

 Our Rating:

+ Solid Contstruction + Great fit

- Anodizing will rub off

Score: 8

Sam’s Links

 njgunblog.com

CC3 Recover Tactical 1911 Grips

After featuring the CC3 1911 Grips back in December '13 in a product spotlight on the podcast, I preordered a pair of grips to try for myself.  They arrived this week (late February) and I installed the black set on my Ruger SR1911c.  The grips only come with screws/nuts for tightening the two halves together at the rail under the dust cover, by the trigger guard. Its a solid mount, no wobble and the gap between the two halves becomes virtually non-existent. As far as looks go, it definitely adds something to the 1911.  Whether that something is good or bad is really personal preference. Prepare for questions and admiration from newer shooters, and scoffs/hisses from veteran 1911 owners. I've heard the word 'Heresy' at least once so far in passing. If you want your 1911 to look and feel more like a XD-M or similar polymer pistol, this is right up your alley.

The main purpose of the CC3 grips is adding the benefit of a rail to affix lights or lasers to a 1911 pistol that is railless, some may say as God or JMB intended.  The designer, Tamir Porat (creator of the Tavor and other Israeli defense products) clearly wanted to add a futuristic look to the timeless war horse. There are reliefs for thumbs on both sides that have very contemporary angles that continue throughout the panels.  This could very well find itself in the next futuristic shooter flick.  With three colors in black, green, and tan, there's a color that will match your pistola's frame and slide.

I'm not a huge fan of how it looks on my commander-sized pistol at the reduced length of barrel, slide, and dust cover make it so the CC3 rail protrudes about 3/8 of an inch further than desired, for the lines in the frame to really line up with the rail.  Of course its still a flush fit inside the channel of the grip.

As for the 'grippiness'of the grip itself, I'm not a huge fan of the texture. It's just raised curved lines that are quite pronouced. Easy for the ejection molding process but cutting edge and comfortable they are not. I foresee a dremel and a woodburning pen in this grip's future.

For the price point, you certainly would be in the market at nice G10 grips or even some exotic wood grips.  I really did just fork out $50 a piece for a plastic design concept of a new product.  Would I have still bought them if I weren't hosting the show/reviewing them for you guys? Probably. Will these stay on my 1911 for awhile? Probably not, I'm not interested in getting a new 1911 holster as I'm enjoying the ones I already have grown accustomed to. They are working with holster manufacturers to get more options out there available in popular rigs.

One of the grip panels for the Dark Earth set was a factory second / had defects, upon emailing CC3 Tactical with a photo they promptly sent out a brand new set, like within hours.  Needless to say their support is very dedicated to customer satisfaction, gotta love that!

Firearms Insider Reviews - 8 Key Points

Claim to Fame: The easiest way to add a grip and rail to your 1911

Target Market:  1911 Owners, Airsoft as well.

FNBs:  (Features and Benefits of this product)

• Easy 3 minute installation. No gunsmith or permanent modifications required.
• 2 piece, High Quality Polymer will not break or damage your gun
• Universal Fit for most 1911 model pistols
• Total Weight 80 grams
• Made in Israel
• Only 0.25" thick grip panels

 What other aesthetic options or finishes are available? Olive Drab, Black, Tan

What others are saying? "Both halves of the grips mate perfectly with one another with no visible gaps. Weighing in at a 80 grams, about the weight of the current generation iPod touch, it looks and feels very well made. The grip itself adds a quarter inch thickness on each side and less than a quarter inch to the front strap. The grooves on the grip are mostly smooth. You can run your entire hand and grip it quickly without scraping your hand. It is very "un-aggressive" unlike the VZ Recon's that would grate cheese. What surprised me the most about the CC3 is how my Surefire X300 fit on the picatinny rail. The light slide on just snug and flush with the front of the "new" trigger guard with no play or wiggle to it."

Price point:

• Retail = $49.95

I need it now! Availability: Readily available on Recover Tactical

Our Rating:

+ Cool Factor is very high, gives an old design a futuristic spin + Customer support is very quick and responsive. + Only .25" thick, will not add bulkiness

- Grip texture is raised thick lines, a little too pronounced for my liking. - Introductory price is a bit high for a polymer molded product.

Score: 7.5 Good

CMMG .22LR: AR Conversion

Earlier this month I received an email ad from MidwayUSA with this product on sale.  I found the carbon steel version with 3 magazines for $156.87 and  the stainless steel model with 3 magazines for $229.00.  I wanted the stainless steel version but decided to save the additional cost and get a few other items I needed in the same order.  Being that I live not too far away from Midway USA, my package arrived in just two days and I eagerly (with my son’s head in front of mine) opened the box to check it out.  I also decided to try out some FrogLube as well, so we proceeded to follow the Froglube guidelines to clean and lubricate the bolt carrier before initial use.  Saturday morning my son and I went out to our range with the AR, the carbine length barrel and gas system and dropped in the conversion bolt. The target was set at 50 yards and the scope was sighted for 100yds in 223.  We were shooting Federal white box and I was able to shoot the entire magazine without any issues.  I was also able to shoot a group approx 2.5 - 3 inches off hand at a fairly rapid pace.  My son has to use a bench (as he can’t hold it up) and was able to shoot similar groups.  I have not done any real accuracy testing, but initial opinion is that it will suit my needs and I will let my son shoot it more without burning the more expensive 223.  Other reviewers state that continued use of 22LR can block up your gas system and that you should fire some 223 through it regularly to blow out the gas tube.  In all, we shot about 200 rounds without any misfires and I am pleased with my purchase.

Firearms Insider 8 Key Points

Claim to Fame:  Converts your standard .223/5.56 AR-15 upper to shoot 22LR.

Target Market:  Plinkers and trainers that want to shoot cheaper ammo.

FNB's (features and benefits of this product):

• Installs fast and easy
• Relatively accurate

What other aesthetic options or finishes are available?:  Carbon steel bolt group, matte black phosphate finish (appears discontinued) and a Stainless steel bolt group.  CMMG Inc.

What others are saying?:  "Conversion works exactly as described, drops in without modification to your AR-15. The slide doesn’t lock open as with the regular bolt carrier group, however the bolt does hang up on the magazine"..  Midway USA

Price point:

• MSRP = $229.95 - $349.95
• Retail = $131.80 (Clearance) - $362.99

I need it now! Availability:  Currently available at Midway USA on clearance.  The link is listed above.

Our Rating:

+ East to install + Reliable

- May not be as accurate as a dedicated upper

Score: 8.5 Great

Tactical Tailor - Fight Light Plate Carrier

The second I opened up the package I put it on and wore it. Unfortunately I didn’t have any plates in it yet. The next day I went to my buddies house and stole the plates from his vest. Along with some of the gear he had on it so I could give this a good test. Over the next few weeks I’ve thoroughly tested this, even wearing it to the gym and doing five miles on the treadmill. Although it is heavier and warmer than not wearing it, I love this vest. It’s designed to be lighter than their other vests and lighter than most others. The inside of the vest has some nice padding to cushion your chest from the plates and allow some airflow. It has nice pockets for the plates and it comes with removable side plate carriers, when removed there’s still Molle attachments on the cumberbund.It’s covered in molle and has velcro on the front and back. On the front there’s an admin pouch that’s pretty big. There’s also some pouches on the side plate carrier that my friend said could be for soft armor, I used it for holding my electronics. The front and back are held together by four side release buckles. On the shoulders, they’re wrapped in elastic to cushion and protect the buckles. The ones on the cumberbund are protected by cordura that wraps around it and has molle on the inside(towards the wearer) and outside. It’s extremely quick to put on and secure. The cumberbund is comfortable but its not too adjustable. In the back it is attached with some heavy duty elastic so that it can stretch out but you can’t make it any tighter. They say to order the vest in whatever size your plates are. The communication/hydration routing loops are elastic so they can accommodate just about anything you can feed through it. The drag handle on the back is sewn about every two inches down the back and it runs the whole way down the vest. I had my brother pull me around for a bit to give it a good test and it works. It rode up a little but it wasn’t really uncomfortable and in a situation where I’m being drug I don’t think that I’ll be that worried.

Firearms Insider Reviews

Claim to Fame:Tactical Tailor quality but 30% lighter

Target Market:  Military, LEO, and people who want a lighter vest

FNBs (Features & Benefits of this product)

• 30% lighter
• Admin pouch
• Adjustable SAPI side plate pouches
• Cushion that aides in airflow
• Drag handle runs full length
• Tons of Molle
• Elastic comm/hydration routing loops

What other aesthetic options or finishes are available? It’s available in ATACS, black, coyote brown, MultiCam, PenCott BadLands, PenCott GreenZone, and Ranger Green. You can see the all at tacticaltailor.com

What others are saying? 4.8/5  blacksheepwarrior.com “I think it’s pretty amazing TT can create such well thought out, quality applications at the prices they do.”  breachbangclear.com

Price point (MSRP versus actual retail) MSRP = $325-335 tacticaltailor.com Retail = $308 lapolicegear.com

I need it now! Availability (Where can I buy this TODAY?) The only options I know of are tacticaltailor.com and lapolicegear.com.

Our Rating (What we say about it) + Comfortable + Light + Many Cammo options + Flash flame protection + Removable side plate pouches + Cushion for airflow and impact protection - Adjustability down sizing

Score 9.5

Condor Phantom Softshell Jacket

The dedicated shooting jacket.  Some people have their favorite +$200 tactical, bells & whistles and all.  I chose to go the cheaper route and picked up a Condor Phantom.  It's no 5.11 tactical, but it has features that make it useful at the range and makes me look a bit cleaner and more professional at the bench.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: This durable, waterproof, lightweight and breathable jacket contains billions of microscopic pores smaller than a raindrop but a hundred times larger than a molecule of water. The triple layer combination wicks moisture, stops water from passing through and circulates body heat.

Target Market:  Shooters of all disciplines.

FNBs:  (Features and Benefits of this product)

• wVertical chest pocket, two hand pockets,  two sleeve pockets, four internal pockets and a pen loop
• Two 4" x 4" shoulder patch panels
• Full front double zipper
• Underarm vent zipper
• Double layer reinforced forearm
• Drawstring waistband
• Adjustable wrist cuff
• Full front YKK zipper with double zipper pull
• Imported

 What other aesthetic options or finishes are available? Olive Drab, Black, Tan, Navy, Foliage

What others are saying? "The quality of the jacket was far better than most of the bad reviews have you believe. For the price you can't go wrong. I have used it extensively in the Pacific North West and it has stood up to some of the worst conditions it has to show here. The only downfalls are like previously noted; - The zipper could be re-designed alot better, it is hard to zip sometimes, and impossible with gloves. - The waist area should have a draw string, because wearing this jacket makes it seem like I am pregnant. The sizes do fit small... " - Condor Outdoor

Price point:

• Retail = $75 - $100  depending on size

I need it now! Availability: Readily available on sites like Amazon.

Our Rating:

+ Lightweight and material helps regular temperature in average conditions. + Water Resistant + Front Chest pocket perfect for phones - Armpit vent zipper has no mesh/breathable material keeping from rubbing up against zipper.  Irritating, literally. - Sizes run small, should have ordered up one size.

Score: 7.5 Good

Horton Pro 175 Crossbow

By Kimberly Cross

My father purchased me the Horton in 2009 for hunting.  I used it to hunt Elk in WA state and White tale in Central Missouri, Turkeys in Western MO. Signted in at 80 yrds, it’s a great hunting tool.

First hunt: loaded on the hike in, left wing began to fray (made of fiber glass). Manufacturer quickly replaced, haven’t had issues since.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Team Realtree® and Horton have teamed up to design a rock-solid deer hunting crossbow that shoulders like your most trusted firearm..

Target Market:  Disabled hunters or those who's states allow crossbows during archery season for all hunters.

FNBs:  (Features and Benefits of this product)

• Talon Ultra-Light Trigger
• DP2 Laminated Limbs
• Thumbhole Stock
• SpeedMax aluminum riser with SoundStopper riser pads
• Machined aluminum alloy cams
• Lightweight weatherproof synthetic stock with Realtree camo finish
• 175lb draw weight
• 310 fps average arrow speed

 What other aesthetic options or finishes are available? Black or Realtree Camo

What others are saying? "Awesome crossbow, I bought this item through amazon along with a few other items for the bow and I've got to say, awesome service also, very easy to assemble and also to operate, it is extremely fast & powerful, be very careful I didn't realize how powerful because it's my first crossbow, it went through my target and embedded in my shed door 2" still there can't pull it out of the metal door! " - Amazon Review

"This is a perfect crossbow for the amateur and experienced alike. The red dot scope places the shots perfect for the ranges given. I assembled it and was on target right away. With very little time it was sighted in and ready to hunt. The only down fall is it should come with string wax and more rail lube. I recommended this to a friend and he bought the exact one a week after shooting mine." - Buzzillions Review

Price point:

• Retail = $400

I need it now! Availability: Amazon.com, Cabelas, Jake's High Country, Bass Pro

Our Rating:

+ Long standing accuracy + Easy to load with included cocking crank + Manufacturer replaced failed limb quickly - Actually a bit heavy compared to the latest crossbows on the market today. - Limb frayed/cracked upon first hunt (no issues since prompt replacement)

Score: 8.0 Great

Blackhawk Sportster Deluxe Pistol Range Bag

Not every trip to the range requires you to carry every thing under the sun.  Some times you just need a convenient way to carry around your essentials.  However its not always about convenience, you also need durability and protection.  That was exactly what I was looking for when I had first purchased this range bag.  The 600 denier polyester is extremely durable.  I'm not sure if it's waterproof, but I've never had any issues when it was carried through the rain.  On each outer side of the bag are zippered pockets which contain the removable gun rugs.  The gun rugs are envelope in shape and offer great protection to your firearm.  Also to mention about the outer pockets, the zippers are interlocking so you can lock up your firearms for safer traveling.  The center compartment of the range bag contains 2 Velcro dividers.  Here is where you can get creative and personalize your inner compartment for your hearing/eye protection, ammo, mags, etc..  My only negative to the center compartment is the lack of ability to lock up this section.  Not that this bag leaves my side unattended, but it still would of been nice like the outer pockets.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: A convenient and extremely durable bag to transport your handguns to the range.

Target Market: Pistol range goers. 

FNB's:  (Features and Benefits of this product)

• 2 interior slash pockets
• 2 flannel lined rugs
• Interior pocket has a dual-slider opening
• MOLLE webbing on exterior
• 600 denier polyester with thick PVC laminate
• Dual-density foam incorporates open-cell foam next to gun for protection and closed-cell foam on the outside to protect against impact

What other aesthetic options or finishes are available?:  Black is the only color option that this bag is offered in.

What others are saying?: Blackhawk does it right !  Overall: 4.8/5 stars.

• Optics Planet
• Amazon

Price point:

• MSRP = No longer sold on Blackhawk's website
• Retail = $ 21.49
• Retail = $ 25.39

I need it now! Availability: Readily available online at stores like Optics Planet and or Amazon.

Our Rating:

+ Dual-density foam firearm protection + 600 denier polyester + Quality + Durability + Inexpensive + Locking zippered firearm compartments

- Interior dividers are flimsy

Score: 9.0 Amazing

Jared prefers Simon Peter Sport Company for all his FFL needs.

Kimber Eclipse Target ll

I have had this gun for about 10 years now and its still my gun safe queen!  Recently I have resolved to bring her back out and start using it more often.  After all isn't that why we buy guns...so we can enjoy them right?  As soon as I got this Kimber in hand, I decided to put on an extended magwell and Kimber tactical grips.  But that's it! Those were the only mods that I deemed necessary for this beautiful piece of firearm bliss.

OK ... time to get into the meat of the matter.  I have fired approximately 1,500 rounds through this Eclipse.  To be completely honest with you guys, when I first took it to the range, I had some feeding issues with the first 300 rounds.  However after getting it tall broken in, the gun ran flawlessly for the last 10 years.  If you have never held a Kimber, they are extremely tight tolerances with no loose rattling like most other 1911”s.  Everything is worked by hand to ensure maximum accuracy and it is very accurate! My ol’ man can punch an 1”-1 ½” group with this firearm. The Kimber Eclipse has a crisp 4-5lb aluminum match trigger and when you pull the slide to the rear, its very smooth.  In fact, everything about this gun is crisp and smooth. I do have one major qualm with the Kimber …. the black oxide finish seems to wear off too easy, especially on parts like the safety that get a lot of skin contact.  Other than that, the pistol has a solid steel slide and frame that is very well balanced.  The target 2 model comes with a 5” match steel barrel and meprolight adjustable night sights.  Last but not least, the Kimber Eclipse has 30 LPI checkering on the front grip (I love this feature) and come with two 8 round mags.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Superb detail, accuracy reliability and smooth operation.

Target Market: Serious 1911 fans, competition and law enforcement.

FNB's (features and benefits of this product):

• 5" match grade barrel and bushing
• Aluminum match grade 4-5lb trigger
• Meprolight adjustable night sights
• Contrasting brushed stainless finish over black infill
• 30 lpi front strap checkering

What other aesthetic options or finishes are available?:  Brushed stainless flats/ black oxide contrast

What others are saying?:  "Kimber 1911's are what 1911's should be"

• The Firing Line
• GUNS

Price point:

• MSRP: $1,393.00
• Retail: $1,210.00

Our Rating:

+ Accurate + Reliable + Beautiful + Superb Quality + Balanced

- Expensive - Break in period - Black finish wear

Score: 8.0 Great

Smith and Wesson Model 638 Airweight 1.875"

Whatever model it may be, the Smith and Wesson J-Frame has been a go to carry option for decades. I’m going to break this one down short and sweet. This is a slick, incredibly well made, and sharp looking revolver. I could choose to write more but it need not be said. This wheel gun is S&W quality, J-Frame concealability,  and .38 Special +p sensibility all wrapped up into a package that one can either enjoy at the range or carry with confidence.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: S&W quality, Concealed Carry,

Target Market: Concealed Carry, Collectors

FNBs:

Key Features

• Aluminum Alloy Frame
• Stainless Steel Cyinder
• Syntheitc Grip
• Shrouded Hammer

Key Benefits

• Concealability of an internal/bobbed hammer while still maintaining the ability of single action operation.
• Lightweight

What other aesthetic options or finishes are available?

While I was unable to find it on the Smith and Wesson Website a Guns & Ammo review also lists a 2 ½” barrel option. A crimson trace model is also available. But check out the Smith and Wesson website as there is great variety within the S&W J-Frame line.

What others are saying?

Steve Gash from Guns & Ammo

Youtube Review- TheFireArmGuy

Price point:

• MSRP = $459 Smith and Wesson Website
• Retail =  $479.99 at Cabela's

Gunbroker = Over MSRP Gunbroker Search

I need it now! Availability

During my recent handgun search only one store was flush with a variety of J-Frame models.  I did not see this gun anywhere else and I looked at 4 different stores.

Our Rating

+Superior S&W quality +Lightweight +Concealability +Cool factor of a “snub-nose” +Versatility of the shrouded hammer design

I find it difficult to spot negatives in design or construction. Engineering a firearm is a give and take. With this type of firearm you sacrifice comfort of shooting and magazine size for a highly concealable and reliable firearm that borders on pocket gun stature. I can't note these things as negatives as they are simply the nature of the beast.

Score 8.5

Featured FFL A frequent stop for my firearms, ammo, and accessory needs I picked this baby up at The Bullet Hole in Belleville, NJ. The Bullet Hole

My Blog  NJ Gun Blog

FourSevens Quark X AA2 Tactical Review

The FourSevens Quark X AA² Tactical (what a mouthful!) is a great light. I chose this light for its relative compactness, its output, and the common battery it uses. Using the AA battery allows it to be much thinner than many other “EDC” lights. Most 123 battery lights are 1 inch in diameter. The Quark AA² is only .86 inch in diameter. It is relatively close in dimensions to the classic Mini-Mag light, but with so many more features. This allows you to carry it clipped to the inside of a pocket with much less noticeable bulk. Plus, I use my light so much, that I am thankful for the use of common, relatively inexpensive batteries. The lengthy name can be decoded for easy identification of the lights function. “Quark” is the actual model name. The “X” denotes that is the brighter version of that particular model. The “AA” is the battery used and the “2” is the number of that battery. The “Tactical” lets you know what the user interface is like. There are two interfaces, “Pro” and “Tactical”.  The Pro cycles through each of the modes by simply soft-pressing the tail cap switch. The Tactical is programmable. It only has two readily available modes, but those two modes can set to whatever you want. The way to switch between them is by either loosening or tightening the bezel. As an example, you can set it up as Loose = Max and Tight = Strobe. For such a compact light running off of AA batteries, it has an amazing output. FourSevens advertises 280 lumens on this X model. The standard(non-X) is advertised at 205 lumens. With my normal use, this light seems to have a pretty good runtime. I usually keep it on High, which is 115 lumens, and I seem to rarely change the batteries. The Tactical has a momentary/constant switch. To use the momentary, you soft press the switch. To make it constant on, you just press the switch all the way in. You can also swap the head and tail cap, which lets you choose if you want the clip to carry it head-up or head-down. I had to send my light back to the factory for repair, because I accidentally got water inside of the tube and the head malfunctioned. This was entirely my fault, and not a faulty seal, but FourSevens fixed it free of charge. My only ding against them would be that I didn’t get any sort of ETA when I returned it. Six weeks doesn’t seem like a terribly long time to wait, but when you have no clue how long it will be, that seems like an eternity.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Bright and compact

Target Market: Concealed carriers that want a relatively compact, tactical light.

FNBs: (Features & Benefits of this product)

Key Features

• 280 Lumens
• Compact
• Many modes to choose from
• Uses 2 AA batteries

What other aesthetic options or finishes are available?

The Quark only comes in black.

What others are saying?

“Quality of fit and finish is excellent throughout the Quark AA2 Tactical and I anticipate all the Quark lights, including this one, to be lifetime lights.” - nutnfancy

Price point

• MSRP = $78.00
• Retail = $65.00

I need it now! Availability:

Readily available from many retailers, including Amazon.

 Our Rating

+ Compact + Bright + Uses common batteries + Can use rechargeable batteries + Momentary and Constant on - Repair customer service was relatively slow and kept me in the dark

Score 9.5

Remington 1100 20ga. Shotgun

Every hunter has one firearm with the most sentimental value. It's probably one of the first they've ever had, and is reliable without question.  For me, this would be my Remington Model 1100 in 20 gauge.  Given to me many years ago by a close family friend and role model in all things outdoorsman, this is the shotgun with which I've learned to hunt upland game birds and shoot skeet.  Over a whole decade later it's still my favorite shotgun for the range or in the field.

I'm not an extraordinary shot or anything, but I can claim with this firearm I can get double and even triple consecutive hits on clay pigeons and quail. The lightweight and soft recoil of 20 gauge plus the gas operated recoil system make this shotgun a dream.

The blued image has held up over the past 10+ years flawlessly, and the engraving on the receiver and bolt add to the classy aesthetic of the shotgun.  This will be one of the finest heirlooms I pass on to my future kin.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: The first autoloader to combine the repeat-shot versatility of early-century models with the sleek, modern lines and handling qualities of revered double barrels.

Target Market:  Bird Hunters, Trap/Skeet Shooters, especially those who benefit from softer recoil

FNBs:  (Features and Benefits of this product)

• Handsome American Walnut Stock
• Machined-cut engraved receiver and bolt
• Stainless Bolt
• Generously sized Bolt Latch
• White diamond grip cap
• High-Polish, Blued Finish

 What other aesthetic options or finishes are available? Many different models to choose from: synthetic/composite, stainless, blued, camo.

What others are saying? "Another high point of the 1100 gas operation is reduced recoil. This gun will be much more enjoyable to shoot than your mule-kicking Mossberg. Especially since it is a lighter gauge. But, don't let that fool you. The 20 gauge is plenty of gun for anything from geese to doves and deer to pigs. In fact, I like the way it puts the smackdown on a a gobbler with heavier loads or gracefully knocks a quail down with field loads. Great all-round gauge. " - fieldandstream.com review

Price point:

• Retail = $450 - $600 depending on model / condition

I need it now! Availability: New models available, but less seen on shelves than 870 series

Our Rating:

+ Finish has held up well, bluing is very good quality + Recoil is soft, due to both 20gauge vs 12gauge and gas operated action + Lightweight translates to faster shots on quick targets, less stress in the field. - Aftermarket furniture for 20 gauge is virtually non-existent.

Score: 8.5 Great

Concealment Solutions Black Mamba CE Review

Concealment Solutions is a small company located in Provo, Utah run by an excellent guy named Jason Christensen. The Black Mamba CE is a hybrid Kydex/leather, inside-the-waistband holster. There are two models of the Black Mamba, the original and CE. The CE offers the “combat” cut leather that keeps you from grabbing the holster at the same time as the gun, which is a great feature at only a $5 increase. There are tons of models available, but if you are local to the Provo area Jason will take the time to custom fit any gun he doesn’t have a mold for. I purchased my Black Mamba for the Glock 26 I was carrying at the time. When I put it on, I immediately knew it was the perfect holster for me. I had previously been carrying in an all Kydex IWB holster that held the pistol straight up and entirely too high with no adjustments, which made even the subcompact Glock difficult to conceal, sometimes. Once I got my Mamba adjusted, I realized I could conceal even a full-size pistol. So much so, that I traded my subcompact Glock 26 for a compact Glock 19. One of the great features of this holster is the incredible range of adjustability. On either side of the Kydex shell, in the leather, there are two tuckable clips mounted. Each clip has the option of being moved up or down by unscrewing the hardware and moving it to a different hole. This allows you to change the depth of the pistol in your waistband and, also, the cant of the grip, allowing you to carry it just the way you want it. The Kydex shell has a molded-in sight channel that is plenty large for any different sights you want to put on your pistol. There is a flare at the top that helps you guide the pistol back in. There is also a flare at the bottom, where the rail is, that I can only assume is to reduce the risk of the rail catching on the Kydex on the way out. Jason provides excellent customer service and answers emails very promptly. I would(and do) recommend the Black Mamba to anyone and everyone that needs a great concealment holster.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Incredibly comfortable concealment holster 

Target Market: Concealed carrier 

FNBs: (Features & Benefits of this product)

• Kydex/leather construction
• Tuckable, IWB clips
• “Combat” cut leather
• Adjustable cant and carry depth
• Good, thick leather

 What other aesthetic options or finishes are available?

The Black Mamba is only listed as black, but I’m sure if you ask, you could get one in any of the colors offered for their belts.

 What others are saying?

            “As time went on, the holster just got more and more comfortable. I can carry all day with no problem.” - Easy Kentucky Concealed Carry

 Price point

Retail = $69.99

 I need it now! Availability

The only place to get these holsters is directly from their website.

 Our Rating

+ Sturdy leather + Tuckable clips + Adjustable depth and cant + Large sight channel + Combat Cut + Amazing customer service!

Score 9.5

Parallax Tactical FFSSR Rail

In building a new range/competitive AR15 from extra parts I was ready to upgrade to an extended length forend, to give the 18" platform an SPR type look.  The Parallax Tactical FFSSR rail caught my eye for its slim profile and rails only where they are needed.  I was lucky enough to catch the 15" handguards as soon as they were instock again (they sold out within 48 hrs)  Shipping was quick from Parallax in San Diego and their customer service is pretty decent.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Single-piece aluminum foregrip delivers one of the slimmest profiles in the industry.

Target Market:  AR-15 owners / builders with any barrel length.

FNBs:  (Features and Benefits of this product)

• 6061-T6 Aluminum Extrusion
• Four limited rotation QD Mounts front and rear.
• (2) Rear single picatinny rail mounts for sling hook type mounts (MagPul RSA)
• Sleeve-style barrel nut with 1-1/8" flats
• Mounts using 4 standard, 2 low-head hex screws Mounting holes every 22.5°
• Includes shims for proper alignment
• Cutout sections compatible with all MagPul accessories, including rail sections

 What other aesthetic options or finishes are available?  Anodized black, Cerakoted options available from Parallax when inventory is high enough.

What others are saying? "Unlike many of the slick sided tubular hand guards on the market, the Parallax Tactical Rail is very overbuilt. It is still slim and fairly lightweight (varies by length) but it is built to be more durable than most of the slim tubular hand guards on the market. " - jerkingthetrigger.com review

Price point:

• MSRP =$199.95
• Retail = $190.00

I need it now! Availability: Good luck. Check with PT on facebook or sales to follow when back instock.

Our Rating:

+ Robust and well constructed for a slim handguard.  Definately durable + Sling swivel points built into front and rear on both sides + Install was pretty easy, fit and finish is very good (black anodized version) - Top 1913 rail is not T-marked. - Barrel Nut is proprietary and version I received had odd flats, had to bribe smith to modify a wrench to index it correctly. - Demand is extremely high, need to increase production size.

Score: 7.5 Good

Looks pretty darn tactical even with less rails; will help me keep it simple and light.

Vortex Strikefire

This review is by Lance Chaar, Instructor at Chaar Tactical

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Shockproof red dot optic, rated for low to high calibers.

Target Market:  Entry level users, novice rifle/AR-15 owners for short distance and close quarters.

FNBs:  (Features and Benefits of this product)

• Increased light transmission
• Optic is sealed to prevent moisture & dust
• Rated for high recoil - factory tests with .375 H&H Magnum for 1000 rounds.
• Temperature rated from -22 to +140 degree Fahrenheit.
• Night Vision mode
• Vortex Warranty

 What other aesthetic options or finishes are available?  black only, comes in red, green, or red/green dot models.

What others are saying? "I think the StrikeFire is a good deal for the price. It never lost zero, was easy to mount and sight in, and the dot never flickered or lost brightness. Do I want my son to use it in Afghanistan? No, that's why the 82nd gave him an M68 CCO. But for the average recreational shooter it's fine. I have enough confidence in it to leave it on our home defense shotgun.  The 2X doubler didn't impress me much, although I can see it's value for some purchasers. I'd rather see Vortex dump the doubler and put the money into better glass. " - AR15.com review - user firedog55

Price point:

• MSRP =$229.00
• Retail = $130.00

I need it now! Availability: Check your local gun stores. Online at www.brownells.com

Our Rating:

+ 4 MOA dot is clear and bright + Ghost ring rear iron sight detachable on 1913 rail (factory installed) + Works well with iron sights (absolute cowitness) - Placement and sensitivity of power button may cause optic to stay on when compressed in a hard case - 2x Magnifier extension causes a "fish-eye" effect and reduced objective width, prefer not to use. - Model purchased only came with one mounting ring option.

Score: 5.5 Mediocre

Works as advertised however overall impression is average.  Looking forward to Gen II version and upgrades to body and control placement.

Comp-Tac Single Magazine Pouch Review

The Comp-Tac Single Magazine Pouch is a sturdy, well made magazine carrier. It is made of a single piece of thick Kydex and has a heavy-duty belt clip. The belt clip is specific to the size of your belt, so you will choose 1.25”, 1.5” and 1.75” depending on the size of belt you carry with. The mag carrier has adjustable retention by a screw that you tighten with stiff rubber between the two sides of the Kydex and adjusts using a supplied Allen key. You can also choose to purchase your carrier for left-handed or right-handed and bullets-forward or bullets backwards carry. The mag pouch carries the magazine very close to your body, so it does not print by protruding outward. One thing that bothers me about it, is that it carries the mag incredibly high. This could be an advantage for competition, but in carry, I find it tends to print at the baseplate. Other than that, this is a great carrier.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Sturdy and secure.

Target Market: Concealed carriers and competitive shooters.

FNB's: (Features & Benefits of this product)

• Kydex
• Retention adjustment screw
• Wide and secure belt clip 

What other aesthetic options or finishes are available?:  These mag carriers are available in black, pink, red and digital camo. See Comp-Tac's website for the options.

What others are saying?:  “The Comp-Tac Single Mag Pouch is simple, nearly indestructible, relatively inexpensive, comfortable and just plain works…all the time!” -TACFIRE

Price point:

• MSRP = $28.00
• Retail = $28.00

I need it now! Availability:  You can purchase the Comp-Tac Single Magazine Pouch from multiple places, but When the Balloon Goes Up! seems to have the best price, after shipping.

Our Rating:

+ Sturdy + Secure + Adjustable retention

- Sits a little high (for me)

Score: 8.5

Spyderco Persistence Review

The Spyderco Persistence is the second smallest knife in Spyderco’s budget folder line.  It’s got a blade length of 2.75” blade and an overall length of 6.8” while open.  It has a 4-way clip that can be positioned for left or right-handed carry and tip-up or tip-down carry.  The blade has a very large hole positioned just right for quick opening. The G-10 grips and skeletonized liner keeps the knife relatively light.  The blade was very sharp out of the box and seemed to keep a good edge for a while. The width of the Spyderco knife helps fill your hand very nicely and is easy to control. The knife locks with a liner-lock that is easily released with the thumb of your hand and (with care) allows you to close it one-handed. This is a great, inexpensive knife that I would recommend to anyone.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: A value priced and good quality knife. 

Target Market: A budget minded person that wants a good carry knife.

FNB's: (Features & Benefits of this product)

• Small, but not too small
• Inexpensive
• Fast opening
• Light 

What other aesthetic options or finishes are available?:  The standard Persistence has black G-10 grip panels and there is a model with blue grip panels. There is also an all black version with a black blade and clip. There are partially serrated, fully serrated and straight blade versions available, to fit your preference.

 What others are saying?:  “Whether you are into knives or are looking to purchase your first blade, the Persistence is a must have.” -Operator Swag

Price point:

• MSRP = $64.95
• Retail = $34.46 

I need it now! Availability:  There are many retailers selling this knife including Amazon and BladeHQ. 

Our Rating:

+ Small + Light + Inexpensive + Pocket clip can be moved to any position + Mostly stainless blade + Ergonomic

Score: 9.0

ATAC A1

I was in the market for not just an EDC (every day carry) flashlight, but something that would also come in handy during a night time home invasion.  You see, I'm not into weapon mounted lights on my home defense handgun.  I know there are a lot of great arguments out there to have one on your gun, but I don't want to point the muzzle of my weapon at something/someone that I don't intend to shoot.  With a weapon mounted light, that is a scenario that does happen.

After reading a lot of reviews and doing some homework of my own, I decided to purchase the 5.11 Tactical ATAC A1 flashlight.  5.11 took the time to design this light with feedback from law enforcement officers and tactical operators to bring to the market a product of reliability, durability and utility.  The ATAC A1 uses a smart Cree LED bulb to throw 103 lumens on high/strobe up to 50 minutes or 28 hours on low (11 lumens) from 1 AA battery.  The tail cap switch of the flashlight allows you to move from high, low or strobe with no auditory sound.  In addition, the ATAC A1 also allows you to do a momentary on for a quick blast of light.

Last but not least, I truly am a fan of the pocket clip attached to this flashlight.  I know that sounds weird, but I hate when I'm trying to pull my pocket knife out and the clip gets stuck on my pants.  The pocket clip on this flashlight is smooth and has not yet gotten caught on any of my pants. "Happy Happy Happy"

Firearms Insider Reviews - 8 Key Points

Claim to Fame: An all purpose built tactical flashlight.

Target Market: Police, security personnel and the every day people.

FNB's:  (Features and Benefits of this product)

• Regulated circuit and CREE LED
• Waterproof
• Machined aerospace-grade aluminum
• Multi-function tail cap switch with momentary-on (high/ultra low/strobe)
• Anti-roll ring
• 103 lumens for high and strobe, 11 lumens for low
• 1 AA battery (included)

What other aesthetic options or finishes are available?:  Black is the only color choice that 5.11 offers this light in.

What others are saying?:

• 5.11 Tactical
• Amazon

Price point:

• MSRP = $54.99
• Retail = $51.00
• Currently on-sale from 5.11 Tactical = $21.99

I need it now! Availability: Readily available online at stores like Optics Planet, Amazon and or 5.11 Tactical.

Our Rating: + Multi-function tail cap switch + Machined aerospace-grade aluminum + Break-away lanyard included + Pocket clip does not get caught on pants making it easy to access + Waterproof

Score: 9.0

Jared prefers Simon Peter Sport Company for all his FFL needs.