Chad Wallace

September 26, 2021

Review, Enoch

Enoch Deep Six Chassis

Chad Wallace

September 26, 2021

Review, Enoch

Enoch Industries is enhancing the Ruger 10/22 market with their chassis systems. They manufacture 2 different ones, the Odin and the Deep Six. Thanks to Faxon, and their rimfire barrel, I was looking for something that would compliment it. Odin offered up a Deep Six in PEWter. Since the Deep Six is longer and better suited for what I was doing, I couldn’t say “no”.

The Deep Six is made for 10/22 style rifles and pistols, but not the take down versions. I used a stock Ruger 10/22 rifle action, but pretty much all of the aftermarket ones will work too. Mounting the barrelled action into the Deep Six is just like mounting it into any other 10/22 stock. The only difference is that Enoch supplies a proprietary screw to hold the action in place. This screw is essentially just a short version of the stock 10/22 mounting screw. I put some threadlocker on it before I screwed it down tight. After tightening the screw, you can actually feel how much more rigid the chassis is over a stock. It’s just a real solid fit, and that screw comes up tight unlike the factory style.

Enoch Industries has made the Deep Six longer than their first chassis, the Odin. It is still short enough for pistol length builds, but I feel it really shines for the more standard rifle length builds. The total length is 15.5 inches. This doesn’t really say much, since that is without any support device attached to the rear rail. What does matter is the 2.5” added length to the forearm over their Odin chassis. This allows for a forearm length of just over 7 inches. Plenty enough to get a good grip on the rifle, as well as maybe install a bi-pod or grip panels. Along the forearm are 3 full length M-Lok slots to aid in adding those accessories. The slots are on both sides as well as the bottom. The Deep Six also allows for almost any barrel profile or barrel addition one might be after. They opened up the forearm to accept barrel diameters of up to 1.310 inches. This means that any bull barrel will fit. Or, if you have a really short barrel and want to run a suppressor, the suppressor will most likely fit in the handguard area!

Besides being a lightweight aluminum chassis, Enoch added a few bonuses into the Deep Six. The first notable one, is the addition of 2 steel QD inserts. One on each side, on the rear of the chassis, behind where the receiver sits. These work really well for pistol configurations, as a sling can give you some extra support when shooting. For a rifle, they just give you another location for sling mounting. Second, is the addition of a built in filler, behind the trigger guard and extended to the pistol grip. It fills that gap so your hand doesn't get pinched. Not all 10/22 chassis’, that use pistol grips, have this. It really does help and it makes the chassis look complete.

Yes, you will need to add your own pistol grip to the Deep Six. All non-beavertail grips will work. If you want to use a beavertail grip, it may have to be modified. I modified a beavertail grip for use on it, I just cut the beavertail back some and it works great. I even tried some 3D printed ones that worked too.

As for mounting a stock or brace, the Deep Six has you covered. The Deep Six uses a 3 slot picatinny rail for mounting these. This type of mounting system is becoming more and more popular, especially on 22’s. With the picatinny rail, the user has many options, from fixed stocks to folding braces. Being that I was doing a “rifle”, I opted for a fixed stock from Occam Defense. This stock is a little shorter than some other options, which actually makes it ideal for me on this chassis. It makes the length of pull a little under 12 inches. The Occam stock uses a 4 slot mounting, so there was a little extra sitting above the 3 slot rail on the Deep Six. Besides looking odd to me, it fit and worked great. I did end up printing a spacer to fill the space and make it look seamless.

The Deep Six is a well thought out chassis. The PEWter color has a nice grayish hue to it, which enhances the other parts installed on the rifle. The edges are smoothed out, but still sharp. The fit of the action is much better than most other stocks out there. So as you can guess, the machining is top notch with no noticeable machining marks. There is also an Enoch Industries logo machined onto the left side of the chassis. No names, just the logo. Along with that, there are also machined recesses that give the chassis a distinct look.

Enoch Industries did a great job with the Deep Six. It’s short enough to be used on a pistol, yet long enough to look good on a full length rifle. The combination I am running turned out fantastic. When using the Deep Six, you can pretty much build any 10/22 your imagination can come up with. I really do like what Enoch has done with the Deep Six. Definitely check out Enoch Industries and the Deep Six chassis. I really can’t say enough good things about it.

Firearms Insider Reviews - 8 Key Points

Claim to Fame:

Lightweight chassis system for Ruger 10/22 style actions

Target Market:

10/22 Builders or modifiers

FNBs (Features & Benefits of this product):

Weighs 13 ounces
Length: 15.25”
Width: 1.5"
Height: 1.5"
6061-T6 Aluminum construction
3 full M-Lok slots at 3, 6, and 9 O'clock
Barrel Channel is 1.310”
3 slot Picatinny rail at rear for stock or brace installation

What other aesthetic options or finishes are available?

Black

Our Rating:

Pros:

Lightweight
M-Lok slots
Steel QD cups
Large barrel channel

Cons:

I would like the rear picatinny rail to have another slot
Availability

Score: 8.50 Great

Favorite Link: WALKER DEFENSE RESEARCH - “INSIDER15” FOR 15% OFF

Chad Wallace

September 6, 2021

Faxon, Review, Ruger

Faxon 10/22 barrel

Chad Wallace

September 6, 2021

Faxon, Review, Ruger

Faxon Firearms has been making quality barrels for some time now. They recently entered into the rimfire barrel market with their 10/22 barrels. Faxon has three different barrel contours to choose from as well as two types of fluting options. There are also three different coating options to choose from. I opted for the flame fluted standard profile in chameleon PVD.

The Faxon 10/22 barrel has a bunch of features not provided on the factory Ruger model. Most notably is probably the addition of Flame fluting. Faxon does a unique style of fluting as one of the options. As one can guess, the fluting looks like “flames”. If you get the “Chameleon” PVD coated barrel, the flutes are actually a different color than the rest of the barrel, which actually makes the flames look a bit more realistic. Since the barrel is PVD coated, the look of the coating will vary from barrel to barrel. This particular one is more of a lavender to blue fade with the flutes being a yellowish orange color. Some are more a blue to green fade. Fluting, both standard and Flame, provides better cooling of the barrel by providing more surface area for the barrel to give off heat. More important to me, is that on a rimfire barrel, it reduces the overall weight. In this case, the Faxon barrel is 0.4 lbs lighter than a factory Ruger 10/22 barrel. Faxon’s pencil profile reduces the weight by another 0.4 lbs, so a 0.8 lb reduction total. The Chameleon barrel sent to me weighs 1.4 lbs total.

When manufacturing the rimfire line, Faxon uses all the same quality materials they use in their other barrel lines. The Rimfire barrels are made from 416-R stainless steel bar stock, in Cincinnati, OH at the Faxon plant. The barrel is given 6 groove rifling with a twist rate of 1:16. The 1:16 is pretty standard for 22 rimfire barrels. They then cut a recessed target crown into the muzzle. The muzzle is also threaded ½-28” to a depth of 0.625”. A thread protector and spacer is also included. The spacer is to be used on muzzle devices that use the 0.400” depth instead of the 0.625” depth. Faxon rimfire barrels are also magnetic particle inspected for flaws and then heat treated and coated. Currently all of the Faxon Rimfire line barrels come in a 16” length.

When looking into 10/22 barrels, one typically finds “bull” style barrels. Faxon has those now too. But the standard profile is really nice if you're not into those “heavy” barrels. The Faxon Rimfire barrel has a tapered profile. It goes from 0.912” after the chamber down to 0.600” before where the muzzle threads start. This is pretty close to the Ruger’s standard barrel profile. The Faxon does fit in my standard 10/22 stock. It may not fit all of them, but it fits mine fine. Faxon also gives the Rimfire line a “Sporting” chamber. This gives the Faxon 10/22 barrels the ability to feed almost all the .22lr ammunition out there. I personally would have liked to see a slightly different chamber used, something like a “Bentz” for a little better accuracy. But I understand why Faxon went with the normal “sporting” chamber.

I ended up mounting the Faxon barrel to a stock Ruger 10/22 action. The barrel fit about the same as the stock barrel I removed. Meaning it slid into the receiver easily with little side to side movement. I then proceeded to mount it in an Enoch Deep-Six chassis. I opted for a chassis because I felt that a regular stock would not do the Faxon Chameleon barrel justice. The barrel looks really good mounted in the chassis. The chassis is also lighter than some wooden stocks, making this barrel/chassis combination very light.

After essentially making a complete different 10/22 than I had started with, I headed out to the range. Since ammunition availability is scarce, I rummaged through my stores of .22lr ammo. I found around 8 different types of plinking ammo, but no match ammo. I figured plinking ammo would be fine for this test. Especially since I don’t consider the Faxon barrel to be a true match barrel. Yes, the barrel is very high quality, it just doesn’t have a match chamber. I shot the various “cheap” 22lr ammo, through the barrel, at 50 yards. All but one of the major brands seemed to group around 1 - 1.5”’s at the 50 yard mark. I started with 5 shot groups and then moved to 10 shot groups. I was really pleased with how well the Faxon barrel shot. My factory barrel shot around 2 - 3” groups with these kinds of .22lr ammo. So as far as accuracy is concerned, I think the Faxon is good to go. If someone were to take the time and figure out which ammunition their barrel prefers, I would expect better results than what I had.

If you’re looking for something different in the 10/22 game, look into the Faxon Rimfire barrels. They aren’t necessarily cheap, but they are excellent quality and made in the USA. With all the different options, you can get extra lightweight, fluted, flame fluted, coated, etc. I’m very pleased with the quality of the barrel along with how it stands out from everyone else's boring barrels. Go give the Faxon Rimfire line a look if you’re building a 10/22 or just looking for something different.