-357 Sig

Lone Wolf Dist Compact Timberwolf Frame Review

While attending the NRA Annual Meetings in April of 2015, I got to meet up with Zack, the marketing manager of Lone Wolf Distributors. I was really interested in their Compact Timberwolf Frame for Glock pistols. Through our conversation, Zack agreed to send me a fully built Timberwolf Compact pistol, which I have since purchased. This is part one of two, where I focus on the frame. Stay tuned for my review of the upper assembly, as well as a summary of the pistol as a whole.  20151024_180117-1

Lone Wolf Distributors has been manufacturing accessories and replacement parts for Glock handguns for many years. From slides, barrels, triggers, and more, you could almost build a custom Glock by just using Lone Wolf’s parts. The only thing missing was the frame, until somewhat recently. Lone Wolf saw the modifications that people generally made to their standard Glock frames, and decided to offer a lot of these modifications right out of the box, with their Timberwolf frame.

Common modifications made by end users to Generation 3 Glock pistols include backstrap reduction, frame texturing, adding extended magazine releases, and even removing material in key places to allow a higher grip on the handgun. Well, Lone Wolf Distributors took all of these modifications into consideration, when designing their Timberwolf frame. I will take a look at each of these aspects one-by-one.



One of the biggest benefits to this replacement frame would have to be the grip. The Timberwolf offers two choices of backstrap to the shooter. The first is the slim grip. It is an incredibly short (front-to-back) grip that more closely matches the grip angle of the classic 1911. The second is a swelled backstrap. It is a little smaller in the hand than the standard Glock swell, which will come as a welcomed feature to many Glock owners. This setup happens to be my favorite of the two. As good as it feels, the smaller grip leaves the meat of my palm really close to the magwell, and it can actually get pinched in between the magazine base plate and the frame, upon reloading. Do this a couple of times, and it starts to get on your nerves. Luckily, the swelled grip fit me just as well, if not better, and Lone Wolf engineered the swap very well. To make the change, all you have to do is, with an empty gun, insert a flat tool into a slot that can be accessed through the magwell, and gently pry downward.


In my trials of the differing grips, I noticed an odd, but very well thought out (and well hidden) feature. Under the backstrap is actually a round recess that will hold one CR2032 battery, which is the somewhat industry standard for micro red dots. Alternatively, it can hold two CR2016s. This is a great feature if you’re building a race gun, or just want to carry a gun with a dot sight, and I am honestly a little shocked LWD doesn’t even list this in their feature literature.

The next part of the grip is the texture. Many people feel that the Gen 3 Glock grip is just too slick. I, for one, am in that boat. What the Timberwolf offers is a very aggressive square pattern, without being so harsh as to tear up your hands, with one exception. The edges of the frontstrap have slightly sharper corners than the rest. I suppose that is just a geometry issue of the curve meeting the corners of the texture, but it became very uncomfortable for the end of my pinky. That being said, it could easily be taken care of with a quick pass of some fine sandpaper, just to knock the edge off. Overall, the grip texture is very good at keeping the gun in your hands while firing. Speaking of the frontstrap, one feature many owners elect to remove on factory Glocks is the finger grooves. The factory finger grooves on a standard Glock 19 (Gen 4) actually happen to fit me perfectly, but I completely understand that there are so many different shapes and sizes of people. One good example for me was my Smith and Wesson Model 66. When I would attempt to get a high grip, the finger grooves would jam right into my knuckle, causing much discomfort, and forcing me to get a less that optimal hold on the gun. That is why it’s quite interesting that Lone Wolf decided to leave the finger grooves on their Timberwolf frame. But, to their credit, they reduced them down quite a bit, so if they don’t fit you well, it may not be the largest discomfort, when compared to a factory frame. I would still like to have seen them remove the grooves, though.

Moving up the grip, we have the undercut trigger guard. This is another common modification that allows you to get a much higher purchase on the pistol. To help with that, even further, they also designed the rear grip higher, and added a beaver tail, to remove the risk of slide bite. I have never personally had the web of my hand bitten by a Glock slide, but I have fairly small hands, and can see where it would be a problem to larger-handed shooters.

One last minor change I would like to see in the grip would be a slimmed down portion where the trigger finger rests on the frame, similar to that of the Walther P99. I feel like it would allow shooters with shorter fingers to more properly grip the handgun, and reach the trigger.

Magazine Release

For the longest time, people have been adding extended mag releases to guns, to make them easier to actuate. Lone Wolf, as well many other aftermarket parts manufacturers, offers extended releases. Lone Wolf even offers one that is wider than the factory, but it requires custom machining to make it work. When designing their frame, they decided to incorporate it right in, that way you don’t have to have it modified later. The wider release offers people with shorter fingers, like me, an easier to reach release without shifting the grip, as well as an easier to find release, which is good for everyone. As with the front strap, the corner of the magazine release can be a little sharp and annoying, if you’re performing repeated actuations, but, like I said previously, it’s not something a little swipe of sandpaper wouldn’t take care of.


Another curious note on the mag release is that Lone Wolf didn’t make it reversible, like the Gen 4 Glock. That would be a nice feature, but seeing as how it was designed before the Gen 4 was released, I can understand the oversight.



The final feature of the Timberwolf frame is the rail. Rather than using Glock’s proprietary rail, Lone Wolf decided to go with a Mil-Standard, three-slot, Picatinny rail. This allows users to select from a wider array of rail-mounted accessories, as well as move the placement forward or rearward, as they see fit. I did not attach anything to the rail, though.



The Timberwolf frame is very a very well thought out replacement for anyone that owns a Generation 3 or older Glock handgun in 9 Luger, 40 S&W, 357 Sig, and even 45 GAP. It is available in either the full-size (17, 22, 31, 37) or the compact (19, 23, 32, 38) frame sizes. The improvements offered by a good grip modification company could run well into the $4-500+ dollar range, whereas Lone Wolf offers many of these features at a fraction of the cost. If replacing a Gen 3 frame for a gun you already own, you could buy just the bare frame and use most of your existing Glock parts to fill the replacement. That is, with the exception of the mag release, since the Timberwolf frame comes with their proprietary release pre-installed. The bare frame will cost you just shy of $200, which is a steal, compared to grip work. If you do build your own frame, you should be aware that you will need to buy either a LWD Gen4/Timberwolf Trigger housing, or LWD Ultimate Trigger Stop Gen4, to replace your Gen 3 housing, as the grip is slimmer in the front-to-back dimension.

If you’re planning to build a whole new gun, or just want multiple lowers, Lone Wolf offers a pre-assembled lower frame for $330, which is only about $30 more than buying every individual part and installing them yourself. To save the hassle and time of potentially forgetting or losing a part, I would recommend just buying the built frame. But, if you want to add your choice of custom trigger, you could easily purchase the parts separately from the frame. Lone wolf makes this easy by offering an interactive schematic.

Another benefit of buying the assembled frame is that Lone Wolf adds a few enhanced parts. These enhancements include: LWD 3.5# connector, LWD 6# trigger spring, LWD Extended slide stop, and LWD Extended slide lock. The 3.5# connector and 6# trigger spring makes for a very smooth, and pretty light, trigger pull. This is a great upgrade over the factory Glock parts that I am glad Lone Wolf includes in the assembled frame. It provides a good trigger feel, without being obscenely light, so I feel it would still be suitable for carry. On my example, they even installed the smooth trigger that usually only comes with the full-size Glock handguns. I much prefer the smooth trigger, as the serrated trigger begins to wear at my trigger finger, during firing sessions. I’m not sure if this is the standard feature for the assembled frame, but based on my invoice, it seems to be. The Extended slide stop is useful if you are the kind of shooter that uses it to release the slide. It provides a much larger purchase area than the standard, so it’s easier to manipulate, but it’s not so large that it gets inadvertently hit. As far as the Extended slide lock (the two tabs in front of the trigger guard that you pull downward to disassemble the gun), I really don’t get the purpose of it. The tabs are a little longer than standard, but I’ve never had a problem using the standard Glock part. It’s an upgrade that I could take it or leave it, and be satisfied either way. It did, though, scratch the inside of my holster. That’s not too much of an issue with a plastic holster, but with leather, I’d be afraid of it causing premature wear on the holster.

In summary, the Lone Wolf Distributers Compact Timberwolf Frame is a great upgrade to your Gen 3 or older Glock pistol, or for building your own custom pistol. It is a great value compared to the expense and wait for frame modification work. Some of the features are addressed on the newer Gen 4 Glocks, but with the Timberwolf, the grip is still slimmer (front-to-back) than the OEM. You also wouldn't get the undercut triggerguard, raised and lengthened beavertail, and reduced finger grooves.

At the time of writing, the assembled frame is available for only $234.95 (prices subject to change), and it even comes with Lone Wolf's excellent Ultimate Adjustable Trigger. This is a promotional price for the UAT, and I do not know the timeline for when it will go back to normal, so if you'd like an assembled Timberwolf frame, I would jump on it as soon as possible. The UAT is normally a $50 upgrade, so you are basically paying for the frame and the assembly labor cost, and getting all of the internals for free!

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Replacement frame for generation 3 and older Glock handguns

Target Market: Concealed carriers and competitive shooters


FNBs (Features & Benefits of this product):

  • Improved ergonomics over Glock OEM frame
  • Full-spec 1913 accessory rail
  • Higher grip angle
  • Extended beaver tail
  • Rounded trigger guard
  • Round/extended mag release
  • Improved Checkering
  • Quick change grip panels (2 total)
  • Spare CR2016 battery storage in grip panel
  • Improved trigger over Glock OEM (standard in assembled frame)
  • Extended slide lock lever (standard in assembled frame)

What other aesthetic options or finishes are available?: Currently, the Timberwolf frame is only available in black.

What others are saying?:

“The Timberwolf pistol is of particular interest to the small-handed shooter, or to the user who says “I love everything about the Glock but the grip angle,” or the handgunner who just likes to be able to get lots of finger on the trigger and lots of flesh and bone around the “handle.” It’s definitely worth a look.” - Massad Ayoob, Daily Caller

“But the Not-A-GLOCK feels terrific in the hand. No really. Like many, but not all shooters, I find it difficult to come to a natural point of aim with a standard GLOCK. What’s more, the grip angle puts my hand and wrist out of the line that gives me stability. The Compact Timberwolf’s grip is, for me, vastly improved. I can get a high hold on the gun and put all of my fingers on the handle. It boasts a fairly small diameter grip, with good holding surface. I can get a natural point-of-aim and a solid one-hand grip, right or left.” - Jon Wayne Taylor, The Truth About Guns

Price Point:

  • Bare = $199.95
  • Built = $329.95
  • Built with UAT = 234.95 (Limited time offer)

I need it now! Availability: You can get the Timberwolf Compact Frame directly from Lone Wolf, and a few online retailers, but once you spend a few minutes on the LWD website, you’ll most definitely want to pick up some of their other great products, like their Glock Magazine Disassembly tool.

Our Rating:


  • Greatly improves ergonomics
  • Interchangeable grip panels
  • Offers many common custom options
  • Improved grip texture to provide better traction
  • Available as a bare frame or built to LWD’s preferred specs
  • Built frame has improved trigger
  • The ability to build any caliber offered by Glock on this frame size (19, 23, 32, & 38)
  • You can even build it as a “Long-Slide Compact” by using a factory full-size upper (such as a G17), or Lone Wolf upper, and purchasing Lone Wolf’s Slide Adapter, which fills the gap between the front of the 17 slide and the 19’s dust cover.


  • Still has finger grooves (though they are greatly reduced)
  • Mag release is not reversible to left-hand operation

Score: 9.090



Visit the Firearms Insider Facebook page for alerts on new reviews, and updates on the show.

Firing Line Review



Pearce Grip Glock Plus XL Magazine Extension

Pearce Grip Glock Plus XL Magazine Extension Another great addition you can make to your Glock arsenal is a magazine extension. Not only does it give you extra surface area if your gorilla mits didn't quite fit on a particular Glock frame, but increases your magazine capacity. If you own a Glock as opposed to say a 1911, you probably already side with the reasoning that "more bullets are better" for the possibility of confronting multiple assailants. So why settle for the standard high capacity magazines from the factory when you can add a few more rounds by installing an "Extendo" as the kids call it?

Adding a Pearce Grip Glock Plus XL Magazine Extension is advertised to increase your 9mm magazine capacity (double stack only) by three rounds. If you want to add on to your 40SW or 357SIG magazine, you get an extra 2 rounds. If you are a very loyal Glock Fanboy and rock the 45 GAP round, you will earn just one extra bullet in the magazine.

I bought a couple Pearce extendos and added them to a 15rd and 17rd magazine. In both cases I found adding the last round (20th for the 17rd, 18th for the 15rd) was almost impossible, and could see the feed lips start to warp under the strain of forcing that 3rd extra bullet that Pearce claims you can achieve. After leaving two extra rounds in and giving the mag time to relax, I still could not add the 3rd round. It's conceivable that you could remove one or two loops from the magazine spring to give more room but I did not wish to make that commitment. The mags weren't brand new / stiff, but perhaps a mag with over 1000 rounds and years of loading/unloading would have more 'give' to add that last widow-maker.

In a Glock 22 15rd 40SW magazine I found adding the 2nd additional round was also difficult but not impossible, and feel more comfortable with the lifespan of the magazine itself when fully loaded to 17rds, and the same applies to .357SIG.

My recommendation is for Glock 19 Gen 2 & 3 owners to pick up a few, which effectively will give you the same capacity as a Glock 17 using 17 round magazines. Of course, you could just use a 17 magazine in the Glock 19 if the gap / overhanging magazine isn't a concern to you. But these extensions do give a more professional look and operational feel.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Adds capacity to Mid and Full Size Glock high capacity magazines

Target Market: Glock owners

FNBs (Features & Benefits of this product)

  • Add three rounds to the 9mm magazine capacity, two rounds to the 40SW and 357SIG and one round to the 45GAP models.
  •  Fits Glock Models: 17-19, 22-26, 31, 32, 34, 35, 37, 38
  • Made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.
  • Bottom of base has 5 recessed dots for filling in with paint (mag identification)
What other aesthetic options or finishes are available?:  Black only

What others are saying?: "This magazine extension added three rounds to my gen 4 GLOCK 26 9mm magazines. Perhaps those who have had problems adding three rounds were using earlier GLOCK magazines. Two notes on squeezing three additional rounds in your gen 4 GLOCK 26:
1. Load the newly-extended magazine to maximum capacity (be it 11 or 12). Then unload and reload repeatedly until all 13 fit. This took three load/unload cycles for me.
2. My magazines have between 600 and 800 rounds through them and typically are stored loaded to capacity. Perhaps the springs are just broken in. Your GLOCK loves to be used...take it to the range!

I began to experience ftf's with this grip extension. I assume this is caused by too much tension on the spring. Decreasing to 12 rounds solved the problem. To be totally, 100% reliable for personal defense or concealed carry, I've been loading only 11 rounds in these magazines. They do provide a VERY solid feel for my small-ish hands with a CTC Laser Guard. "  Daniel Hood, Amazon User

Price Point:

MSRP: $9.95 Retail: As low as $6.99 at local retailers

I need it now! Availability: Readily available at Pearce Grips or Brownells

Our Rating:


  • Front grip texture matches Gen 3 frontstrap texture
  • Provides pinky ledge for those with bigger hands
  • Baseplate included has slots that interface with rails molded in interior or extension for positive interface
  • Aids in retrieval from pouches for more dexterous reloads


  • Last round of advertised capacity increase is very difficult to add without a magloader.
  • Witnessed deformation of the feed lips when installed on a Glock 17rd magazine and attempting to load 20th 9mm round.
  • Increased strain on spring

Score: 7.0 Good



Smith & Wesson M&P P357c


My first new addition of 2014 is an Smith & Wesson M&P 357c.   It's an interesting little powerhouse, and had I not already had 357 sig reloading components I probably would have passed this compact pistol up.  However after taking it out on our first date and getting a feel for its frame, I think I've grown a fondness for her.  The price of the meal was unbelievable, as .357 Sig ammo prices have only skyrocketed up - on top of the prepanic pricetag that was in the $30 per 50 range.  The only boxes I found locally were $33 for Winchester whitebox 125gr FMJ 50 rounds or $42 for the same offering from American Eagle.  The trade off for the lighter wallet was heavy firepower, the sig round is definitely a snappy performer with a wallop. 

Short history of the .357 Sig round: Developed in 1994 by Sig Sauer, the round 9mm bullet in a necked down (but slightly longer) 40s&w case. It's one of the first commercial members of the bottle-neck pistol cartridge family.  The reason behind the design was to match the performance of a .357 Magnum 125gr round fired from a 4 inch revolver, but with a higher capacity semi auto pistol with magazines. Law Enforcement was all over the .357 Sig in the mid-late 90's and early 2000's until the economy tanked and it became much more fiscal to switch back to 40sw or 9mm.

The 357c and its other M&P bretheren have earned a high reputation for concealability, firepower, and overall suitability. As a defensive caliber, its hard to disagree that the .357 sig has an edge.  With an average velocity of 1,385 ft/s and muzzle energy of 532 ft·lb, the projectile has more gas than both its 9mm and 40sw competition.  Penetration averages 12-16 inches depending on bullet type.  This equates to more energy delivered to tissue, and less resistance from barriers and heavy clothing.  In a compact like this M&P, its a great carry platform.  Having 10+1 rounds may seem disadvantageous to some who are legally allowed to carry more, or have the body frame that allows for a full size grip.  But for those who want something smaller and easier to carry, and still have confidence in what the caliber is capable of, the .357c seems like the ticket.  Those with sausage fingers may find three or two digits on the frame is pretty skimpy, and those mag extenders with the pinky ledge maybe something worth getting.  Just be sure to pick up that brass, because its not something you come across at the range often and even if you do not reload, someone out there does and will be grateful to do business with you.

To address the affordability of future dates with this dame, I picked up a conversion barrel from Storm Lake in 9mm.  The barrel was about $150 after tax and shipping, and will surely pay for itself after a few range sessions.  I picked up a couple 17rd full size 9mm magazine (thank you Washington State for not trying to limit that freedom, I'm keeping my eye on you though!) and some X-grip adapters that make those mags flush with the compact frame.  The result is a very comfortable range shooter, the magazine combination does not detract from the ergonomics but adds to them, giving the grip a Walther-esque curve that just FITS my hands much to my surprise.  The Storm Lake barrel is supposedly "Match" grade, and with my shooting I can only determine that it hits where I point it.

photo 5

What I don't like about the M&P357c is its "ninja" trigger reset, which is barely noticeable at all. Someone who has never had the blessing/curse of developing muscle memory and shooting habits with a Glock or other polymer strikerfire pistol may not care about it, but it drives me nuts. I'm used to that audible and tangible reset, and if it doesn't go off I'm used to treating it as a malfunction.  It is there just ever so slightly, so I will have to adjust sensitivity.  Also, I despise the safety systems.  M&P's seem to come in different safety varieties, the least of which I hate is the thumb safety surprisingly, and I've only seen it on a 9mm compact model once (Most including mine do not have this).  All factory models sport a hinged trigger safety, which is disruptive to good trigger pulls IMHO, and can easily be defeated by a stick of lip balm, jacket drawstring, a pen, basically anything thats rigid enough and the right motion and the trigger will depress fully, which probably explains the 6.5 lb trigger weight.  There are modifications for both of those issues out there with basic disassembly abilities and access to youtube.  The other safety I really don't care for is the magazine safety, which deploys when a magazine is released from the gun.  Sure it can prevent ND's from that infamous "last round in the chamber" from occurring when you pull the mag out, but there's really no substitute for competence of the firearm operator. If for whatever reason you are in a struggle and the magazine is ejected from your M&P you had better switch to melee mode, because you are now holding an expensive bludgeoning device. Of course not many crooks will know about that achilles heel of safeties, so practice that poker face!

Firearms Insider Reviews - 8 Key Points

Claim to Fame: No other polymer pistol offers this combination of versatility, durability and safety.

Target Market:  Police, private security and civilian shooters.

FNBs:  (Features and Benefits of this product)

  • 3.5" Barrel, 6.7" Overall Length compact profile well suited for concealed carry.
  • 22.2 oz unloaded
  • Zytel Polymer Frame, Stainless Steel Barrel/Slide and Structural Components
  • Replaceable backstraps in 3 different sizes.
  • 6.5lb trigger pull
  • 10+1 capacity with standard compact mags, accepts 15 round full size mags.
  • Sights: Front Steel Ramp Dovetail Mount / Rear Steel Novak® Lo-Mount Carry.  Tritium sights optional.
  • Reversable magazine release.
  • Accessory Rail

 What other aesthetic options or finishes are available?:  Black only but there are FDE backstraps available.

What others are saying?: "This gun now serves as a backup and nightstand gun, because it is still an excellent shooter, concealable, comfortable to shoot, reliable, good capacity for its size (and can take a full sized magazine, so use that for a secondary for increased capacity), and very economically priced for the quality you are getting." Buds Guns Customer Review

Price Point:

I need it now! Availability: Personal sales, or convert a M&P40c.  This model is no longer in production as is widely sought after.  357sig barrels are in high demand and low circulation as well.

Our Rating:

+ Better ergonomics than Glock (Gen 3) in my collection - easy to customize to personal hand size - grip has good beavertail/concave area for web of hand + Trigger is relatively smooth (mine was  used/broken in) and doesn't feel heavy as 6.5 lbs sounds. + Scalloped rear slide serrations work well. + Sights are bright and white, rear is by Novak + Easy to convert to 40sw or 9mm with conversion barrels from S&W or Storm Lake.  Can accept a factory S&W 40c barrel, uses same mags.

- Trigger reset is almost negligible, not audible and barely tangible.  Takes getting used to or modification. - Taking down not as fluid as a glock or XD, requires a tool (integrated in grip) to pry a lever from inside the slide, makes cleaning or caliber swapping a slow process. - I personally think the trigger safeties on M&P's are pointless. A wide margin of objects besides a finger could inside the trigger guard and deactivate safety with the right downward motion and cause accidental discharge. - Not a big fan of the magazine safety either (will not fire when mag is ejected)

Score: 7.5 Good75








Sig Sauer – SP2022

 Sig 2022

Last year about this time I found myself in the market for a new pistol. I knew I wanted a polymer framed handgun that was accurate and reliable, to use more as a range toy but could also be a carry gun if it had to.  I really found myself drawn to the Springfield Armory XDM and had decided to place an order.  That is until one day I was in my local gun shop and the sales guy behind the counter handed 

Sig 2022 - 4me a Sig Sauer SP 2022.  Instantly there was just something about that gun!  It was so comfortable.  It was like the grip just melted into my hand.  Later that month, Black Friday rolled around. The Sig SP 2022 was marked down a hundred bucks and I took one home. I’ve been carrying it for about a year now and I’m just as happy with my purchase now as I was then.  People may ask, “Tiny, what’s so great about a fifteen year old design?”  Well I’m so glad you asked!

In 1998, Sig Sauer released their first polymer frame pistol in 40 S&W and 357 Sig.  Then a year later, they released it in 9mm.  For the time, the Sig Pro series handgun was a pretty nifty design with interchangeable grips and an accessory rail.  However, the polymer framed hand guns had not yet been embraced by the market.  The Sig Pro soon became known as the poor man’s P226.  However a few years later, polymer became the industry standard.  In 2002, Sig redesigned the Sig Pro for French law enforcement Sig 2022 - 2and rereleased it as the Sig SP2022 with a service life in mind of twenty years (hence the designation 2022).  The pistol is very similar to the Sig P226.  It uses the classic DA/SA trigger that Sig is known for with no manual safety.  Instead, the gun features a decoking lever in its place and Sig’s four point safety system.  It has a 3.9 inch barrel with an overall length of 7.4 inches.  Its 5.7 inches tall, 1.3 inches wide and weighs 29 ounces unloaded.  Some say it’s a little chunky for IWB carry but if the French can do it, it can’t be that bad!  It shoots great!  The double action trigger pull is 10 pounds and even though that sounds heavy, it’s very smooth!  With a little practice, you won’t have any trouble holding your sights on target.  The single action trigger pull is 4.5 pounds which in my opinion is ideal.  The reset is a little long but it’s not really a problem unless you’re Jerry Miculek.  Still, high level competition shooters may opt for a shorter reset trigger on their match pistols.

Now you may be asking, “gee whiz, are there any reasons I shouldn’t get one?”  My answer is not many.  There’s not a ton of Sig 2022 - 3aftermarket accessories and most of them are from Sig Sauer themselves.  To they’re credit they haven’t abandoned it.  You can buy different size grips and switch between 40 S&W and 357 Sig with conversions available.  Unfortunately there are no conversions for 9mm and neither is there a 22 conversion for plinking on the cheap.  Also, while there are holsters out there to be had, you may not have your choice manufacturer.  Furthermore, while the sandpaper like grip is great for IDPA, I would recommend an undershirt if you’re carrying IWB because it will eat into your side like a bull shark!  That, or order the large grip from Sig.  It has rubber inserts that are real comfortable, but if anybody from Sig is reading this, we really need a medium or small size grip with the rubber inserts.  Magazines are relatively easy to find. The 40 S&W and 357 Sig have a capacity of 12 while the 9mm is 15.  Mec Gar also makes 17 round magazines for the 9mm.  There are rumors that Sig is coming out with a 20 round factory magazine for the 9mm chambering, but I wouldn’t hold my breath till I see one.

Still all things considered, this is a great pistol for the money!  Take down of the pistol is done with one pin that doubles as the slide release leaver.  That makes for easy cleaning and reassembly. Accurate and reliable, I’ve never had a single malfunction.  Supposedly, the French police tested the pistol with over 400,000 rounds without having a malfunction!  I doubt many shooters will fire that many rounds through a single handgun.  If you looking for Sig Sauer quality but don’t have a thousand dollars to spend to get it, look no further than the Sig SP 2022.  Give it a shot; you’ll be glad you did!

Firearms Insider Reviews – 8 Key Points

Claim to Fame: A Sig Sauer pistol for the working man!

Target Market: Law enforcement, everyday carry, home defense and competition shooters.

FNB’s: (Features & Benefits of this product)

  • Stainless steel slide with Nitron finish
  • SIGLITE Night Sights
  • Sig’s four point safety system
  • Interchangeable Grips
  • Integrated accessory rail

What other aesthetic options or finishes available:  Sig offers this pistol in black, diamond plate, black diamond plate and flat dark earth.

What others are saying:

The Truth About Guns You Tube

Price Point:

I need it now! Availability: I haven’t been in a gun shop yet that didn’t have one for sale but if not, there readily available on the internet.

Our Rating:

+ Superb Sig quality that will leave you enough money for ammo and a holster + Accurate + Super reliable + Interchangeable grips + Light recoil + Great trigger pull in both single and double action

- Lack of aftermarket accessories - Long reset on trigger - Come on Sig, give us our 20 round mag already

Score: 8.585

Sig Sauer P229R

Sig P229

By Devin Blystone

Sig Sauer is a quality firearms manufacturer.  The P229R is carried by thousands of law enforcement professionals throughout the country.  The compact size of this gun makes it great for conceal carry but in reality, it doesn't feel like a compact gun.  At 37 oz, it’s heavier than other compact models on the market, but the balance of the gun makes it feel like it weighs a lot less. The P229R is available in 9mm, .357SIG, and .40S&W.  Not to mention, that there are other many different variations of this gun available. Magazine capacity for the P229R is 13 rounds for 9mm and 12 rounds for .40S&W and .357SIG.   Should you live in these states, 10 round CA and MA compliant magazines are also available for purchase.  Shooting this pistol in .40S&W is a breeze.  The felt recoil isn't bad and I can get sights back on target quickly. The sights available for this pistol are regular and the SIGLITE night sights.

Firearms Insider Reviews - 8 Key Points

Claim to Fame: Reliable and accurate.

Target Market: Higher end market, law enforcement, and government agencies.

FNBs (Features & Benefits of this product):

  • Decocker
  • Almost full length rails for the slide to travel on
  • DA/SA, 10 lbs DA trigger pull and 4.4 lbs SA
  • The polymer grips provide great traction
  • Solid metal frame
  • Low profile slide serrations
  • Accessory rail
  • 10 and 12 round magazines(.357SIG and 40S&W)
  • Lanyard loop
  • Available in 9mm, .357SIG, and .40S&W

What other: Black, stainless, two tone and flat dark earth.

What others are saying?:

  • “This SIG P229R is now on my "all time favorite handguns" list.” Ballistics 101
  • “there is  no question it is an excellent choice for concealed carry.”  U.S. Concealed Carry

Price point:

I need it now! Availability: Check your local gun shops.  Also, the gun can be bought at many websites.

Our Rating:

+ No manual safety + Heavy, long first trigger pull + Decocker and slide stop release are low profile + Takedown is pretty easy + 3.9” barrel cuts down on the felt recoil + Accessory rail has 3 positions + Replaceable grips + Balanced very well, feels lighter than it is

- Expensive - 32.0 oz. with magazine - Two piece polymer grips meet at the back and feel cheap when they flex

Score: 9 Amazing!90


To hear more about this and other gear, go check out the Firearms Radio Networks new show, Firearms Insider Gun & Gear Review Podcast.